1980 Jeep Wagoneer Drivetrains
More 1980 Jeep Wagoneer Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1980 Jeep Wagoneer, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1980 Jeep Wagoneer Drivetrains
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
USA Standard Gear – 4340 Chrome Moly Replacement Axle For Dana 44, 74-79 Wagoneer, Lh Inner, Uses 5-760X U/Joint (Part No.35090)
from
$279.99
4340 Chrome Moly replacement axle for Dana 44, 74-79 Wagoneer, LH Inner, uses 5-760X u/joint. 33.19″ long, 30 spline.
Product Features:
See More
Product Features:
- 30 spline
- 33.19″ long
- Fits Dana Spicer 44 in 1974-1979 Wagoneer
- Left hand inner
- 5-760X U-joint size
- 4340 Chromoly
Yukon Gear – Model 20 Axle End Play Shim (Part No.55060)
from
$9.29
Model 20 0.003″ axle end play shim.
Product Features:
See More
Product Features:
- Axle end play shim for AMC Model 20
- 0.003″ thick
Crown Auto Jeep Replacmnt – For Use With Front Or Rear Yokes, 12 Point Bolt (Part No.4006928K)
from
$9.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Neapco – Universal Joint (Part No.1-6301)
Felpro – DIFFERENTIAL GASKET (Part No.RDS 13089)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-194)
from
$785.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
MOOG Driveline Products – Double Cardan CV H Yoke (Part No.647)
from
$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Motive Gear – Differential Gear Install Kit (Part No.D44IK)
Yukon Gear – Wheel Lug Stud (Part No.33571)
from
$7.99
Wheel Lug Stud
Spicer – Universal Joint (Part No.5-760X)
from
$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)
from
$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
Driveworks – Oil Seal (Part No.S-2146)
from
$4.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
National – Bearings (Part No.F-4020)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.710164)
from
$17.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Zip Locker Front Switch Cover (Part No.34009)
Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)
from
$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.
Product Features:
See More
Product Features:
- Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
- 7/8″ x 14 thread
- 1 5/16″ socket
Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)
Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)
from
$30.99
Product Features:
See More
- Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles
Yukon Gear – Pinion Install Kit For Dana 30 Front Differential (Part No.13016)
from
$159.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30
- Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
National – Multi Purpose Seal (Part No.7412S)
from
$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.32042)
from
$414.99
Yukon Performance steel spool for Dana 60 with 35 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler Dana Spicer 60 with 35 spline axles
- 4.10 and down ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Replacement Trail Repair Kit For Dana 30 And 44 With 1350 Size U/Joint And Straps (Part No.32280)
from
$481.99
Yukon replacement trail repair kit for Dana 30 and 44 with 1350 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 1350 u-joint size
- Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
USA Standard Gear – Master Overhaul Kit for the Dana 44 Differential with 30 Spline (Part No.37008)
from
$289.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
USA Standard Gear – Dana 44 Master Overhaul Kit Replacement (Part No.37015)
from
$259.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 rear
- Uses Koyo bearings and races
- 30 spline
- Rear axle kit
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
Popular 1980 Jeep Wagoneer Drivetrains Categories
1980 Jeep Wagoneer Drivetrains
You count on your 1980 Jeep Wagoneer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 365 Drivetrains ranging in price from $1.99 to $1,390.00, you’re sure to find everything you need for your 1980 Jeep Wagoneer.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Moog, and Driveworks. 1980 Jeep Wagoneer Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,790 extensive product reviews on 1980 Jeep Wagoneer Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1980 Jeep Wagoneer below to get started!
Top-Rated Drivetrains Brands For Your 1980 Jeep Wagoneer
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Jeep Wagoneer running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1980 Jeep Wagoneer back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1980 Jeep Wagoneer, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1980 Jeep Wagoneer Drivetrains
What are the most purchased Drivetrains for the 1980 Jeep Wagoneer?
Out of 365 Drivetrains for the 1980 Jeep Wagoneer, the most popular in our inventory are:
What are the top-rated 1980 Jeep Wagoneer Drivetrains?
Top-rated Drivetrains for your 1980 Jeep Wagoneer based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
