1980 International Scout II Drivetrains
More 1980 International Scout II Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1980 International Scout II, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1980 International Scout II Drivetrains
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)
Yukon Gear – Minor Install Kit For Dana 30 Front Differential (Part No.12013)
from
$93.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30
- Included are a pinion seal, axle seals, complete shim kit, marking compound and brush.
National – Multi Purpose Seal (Part No.350414)
from
$7.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Dana 44 And Chrysler 9.25" Traclloc Clutch Kit Replacement (Part No.16153)
from
$139.99
Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Dana Spicer 44 and Chrysler 9.25″ Trac Loc positraction
Powertrax – Lock Right Locker (Part No.2415-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
National – Bearings (Part No.B-2110)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Front Outer Replacement Axle Seal For Dana 30 And 44 Ihc (Part No.30071)
from
$11.99
Front outer replacement axle seal for Dana 30 and 44 IHC.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Fits Dana Spicer 30 and 44 in International Scout
Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.206-FF)
from
$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Spindle Washer – I.D. 1 In.-5/8 In. O.D. 2-3/16 In. Thickness 3/32 In. (sold by each) (Part No.618-045)
from
$6.99
Our Spindle Nut Washers are coated for high corrosion resistance and a long service life. Depending on the application, they are also available in a kit that includes the nut, washer, and retainer.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Conveniently available in packs of different quantities
- Durable steel construction
- Dorman’s Spindle Nut Washers are designed and constructed to strict engineering quality standards
Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)
from
$26.99
Product Features:
See More
- Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles
National – Bearings (Part No.25523)
from
$19.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Transfer Case Output Shaft Seal (Part No.99156)
from
$23.49
Transfer Case Output Shaft Seal
Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)
Yukon Gear – Small 260 Axle U/Joint For Early Dana Front Axles (Part No.42012)
from
$73.99
Yukon Small 260 axle U/Joint for early Dana front axles. 2.188″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)
from
$145.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 26 spline
- 1330 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.062″ cap diameter
- Strap style
Motive Gear – Differential Bearing Kit – Timken (Part No.R30RT)
from
$109.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- DANA-30 JEEP BRG & SEAL KIT YJ 66-EARLY 90’S
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – Front Hub Conversion, CJ & Scout, 5 X 5.5" (Part No.21697)
from
$866.99
Front hub conversion, CJ & Scout, 5 X 5.5″.
Product Features:
See More
Product Features:
- Fits Jeep CJ
- Converts internal mounted hub to stronger external design
- Includes spindle nut with washer kits and WARN locking hubs
Yukon Gear – Axle Bearing Retainer Plate For Dana 44 TJ Rear (Part No.33472)
from
$19.99
Product Features:
See More
- Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
- 3/8″ bolt holes
- 1 5/8öx3 3/16ö bolt pattern
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)
from
$7.99
Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 25, 27 and 30
Yukon Gear – Power Lok Positraction Internals For Dana 44 And Chysler 8.75" With 30 Spline Axles (Part No.16005)
from
$503.99
Yukon Power Lok positraction replacement internals for Dana 44 and Chysler 8.75″ with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
- Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
Motive Gear – Differential Carrier Shim Kit (Part No.1115)
Popular 1980 International Scout II Drivetrains Categories
1980 International Scout II Drivetrains
You count on your 1980 International Scout II to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 270 Drivetrains ranging in price from $3.99 to $1,633.99, you’re sure to find everything you need for your 1980 International Scout II.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, DriveWorks, and Spicer. 1980 International Scout II Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,005 extensive product reviews on 1980 International Scout II Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Bearing with 3.4 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 2.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1980 International Scout II below to get started!
Top-Rated Drivetrains Brands For Your 1980 International Scout II
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 International Scout II running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular Milemarker Drivetrains
You’ll find popular Milemarker brand products across 4WD Components. All are waiting to get your 1980 International Scout II back on the road. Some of the top-rated Milemarker products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1980 International Scout II, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1980 International Scout II Drivetrains
What are the most purchased Drivetrains for the 1980 International Scout II?
Out of 270 Drivetrains for the 1980 International Scout II, the most popular in our inventory are:
What are the top-rated 1980 International Scout II Drivetrains?
Top-rated Drivetrains for your 1980 International Scout II based on customer reviews/ratings are:
from
$28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
