1980 GMC K3500 Bodies and Fender Parts

Essential 1980 GMC K3500 Bodies and Fender Parts

KAI – Quarter Panel Patch (Part No.RRP150)

Quarter Panel Patch

from

$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28

Product Features:
  • 60 1/2 X 28, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Molding (Part No.GMK4144115732L)

Fender Molding

from

$21.99
New Goodmark Front Driver Side Lower Fender Molding, Except 1977 Models, Made Of Aluminum

Product Features:
  • Except 1977 Models Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$59.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Panel (Part No.RRP145)

Wheel Arch Panel

from

$33.99
New Standard Replacement Driver Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:
  • 41 X 12 X 2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Roll Pan (Part No.EFXRP15)

Roll Pan

from

$189.99
New ProEFX Rear Roll Pan With License Plate, Fleetside

Product Features:
  • Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender (Part No.GM1241122)

Fender

from

$409.99
New Standard Replacement Passenger Side Fender

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Trim (Part No.GM1290102)

Wheel Arch Trim

from

$30.99
New Standard Replacement Front Driver Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Front Passenger Side Wheel Opening Molding, Made Of Steel (Part No.GM1291102)

Front Passenger Side Wheel Opening Molding, Made Of Steel

from

$29.99
New Standard Replacement Front Passenger Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Body Mount Kit Radiator Support (Part No.924-010)

Body Mount Kit Radiator Support

from

$78.99
Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:
  • Direct replacement – this body mount fits and functions like the original equipment mount
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4116R)

Body Cab Mount Set

from

$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP102)

B-Pillar/Rocker Panel

from

$41.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP103)

B-Pillar/Rocker Panel

from

$44.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material

from

$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Universal Fitting
  • Easy No Drill Installation
  • Perfect Compliment Nerf Bars
See More

Husky Liners – Front Or Rear Mud Guards (Part No.56221)

Front Or Rear Mud Guards

from

$76.99
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that’s as tough as nails (or rocks for that matter). They’re easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.

Product Features:
  • Black
  • Made in the USA
  • Built to the maximum width for full tread coverage of single or dually factory tires.
  • Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
  • Our Exclusive Husky Shield Film is easy to install and provides an invisible protective barrier between the Mud Guard and the vehicle’s paint.
See More

KAI – Floor Pan (Part No.RRP1251)

Floor Pan

from

$69.99
New Standard Replacement Driver Side Cab Floor Panel, 18 5/8 X 29 1/8

Product Features:
  • 18 5/8 X 29 1/8, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.RRP1255)

Floor Pan

from

$239.99
New Standard Replacement Driver Side Complete Cab Floor Section, Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2

Product Features:
  • Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel (Part No.GMK4174610732R)

Quarter Panel

from

$119.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High

Product Features:
  • 7 3/4 Inches Wide X 14 1/2 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rampage – Xtremeline 6 in. Oval Step Bar Cab Length, Semi-Gloss Black, 80 in., Pair (Part No.16180)

Xtremeline 6 in. Oval Step Bar Cab Length, Semi-Gloss Black, 80 in., Pair

from

$306.99
Xtremeline / Streamline bars -The new and unique design has the styling appeal of a side bar coupled with easy installation features and strength of a running board. With a 5-inch step these bars have over 50% more step area than regular tube steps. Stylish custom molded end caps add streamline styling, can be painted for a custom finish and seals the step from moisture. Results in an OEM finished look. No Drilling most applications – Heavy-duty mounting brackets mount to existing factory holes. A new innovation in mounting brackets make installing these bars quick & easy and the bar can be positioned forward or back to compliment individual style or bar location needs. Rampage Exclusive: Galvanized Steel – Powder Coat, Weather Seal Brackets, Note: Xtremeline and Streamline Bars may also be installed with other aftermarket flat top installation brackets by using the Rampage Top Clamp Conversion Kit.

Product Features:
  • New And Unique Design
  • 5 in. Step Pads
  • Custom Molded End Caps For Streamline Styling
  • Sealed To Prevent Moisture
  • No Drill Installation
  • Newly Innovated Installation Brackets
  • Quick Easy And Reliable Install
  • Vehicle Specific Mount Required
  • Must Be Purchased Separately
See More

Dee Zee – Powder Coated, Black, Aluminum, Unlighted, Mounting Kit Required, 86 Inch Length (Part No.DZ16321)

Powder Coated, Black, Aluminum, Unlighted, Mounting Kit Required, 86 Inch Length

from

$504.99
Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:
  • Lightweight Aluminum Powder Coated Frame
  • Full Length Protective Accent Trim
  • Slip Resistant Raised Rubber Grommets On The Step Area
  • NRT(TM) Powder Coated Steel Braces
  • Mounting Braces Not Included
  • Widened 6 Inch Step Area
  • No Drilling Required
See More

KAI – Rocker Panel (Part No.RRP3789)

Rocker Panel

from

$92.99
New Standard Replacement Driver Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:
  • 75 X 5.38 X 2.88, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.RRP122)

Rocker Panel

from

$59.99
New Standard Replacement Passenger Side Rocker Panel, Standard Cab, 52 X 10

Product Features:
  • Standard Cab Models, 52 X 10, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Extension Panel (Part No.RRP114)

Fender Extension Panel

from

$24.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ARIES – Chevy & GMC Side Steps – 3" Round Nerf Bars (Part No.204018)

Chevy & GMC Side Steps - 3" Round Nerf Bars

from

$155.99
ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy Blazer FS, C1500, C2500, C3500, K1500, K2500, K3500 or Tahoe and GMC C1500, C2500, C3500, K1500, K2500, K3500 or Yukon (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:
  • Unique bends to contour to the body of the vehicle
  • Custom, non-skid step pads for safe entry and exit
  • 3″ diameter, heavy-wall tube design
  • High-strength carbon steel construction
  • Highly rust-resistant semi-gloss black powder coat and E-coat finish
  • No-drill, vehicle-specific application for a custom fit
  • Heavy-duty steel mounting brackets for a solid step
See More

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5025)

Premier 4 Oval Nerf Step Bars

from

$309.99
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:
  • Vehicle Specific Mounting Kit Required; Sold Separately
  • 4 in. Oval Tube
  • Injection Molded Polymer Step Pad
  • Molded Oval End Caps
  • Bolt-On Installation; No Drilling Required
  • 3 Year Warranty
See More

Dee Zee – With Step Pads, 3 Inch Round Bent, Polished, Ss, Frame Body Mount Bolts (Part No.DZ370113)

With Step Pads, 3 Inch Round Bent, Polished, Ss, Frame Body Mount Bolts

from

$368.99
Dee Zee Nerf Steps A tubular side step for your vehicle. Constructed of polished stainless steel. 3 Inch round design. Molded plastic step pads provide non skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Not Required
  • 1 Pad On The Bar
  • Molded Plastic Step Pads Ensure Secure Footing. 90 Degree Bends And Hidden Bracing Create A Sleek Look
  • Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
  • Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
See More

KAI – Backing Plate (Part No.RRP104R)

Backing Plate

from

$12.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Backing Plate (Part No.RRP104)

Backing Plate

from

$7.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4

Product Features:
  • 26 1/8 X 4 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Backing Plate (Part No.RRP104L)

Backing Plate

from

$13.99
New Standard Replacement Driver Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

1980 GMC K3500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1980 GMC K3500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 41 different Bodies and Fender Parts in our inventory ranging from $7.99 to $661.99. That means you can find the exact parts or products you need to keep that 1980 GMC K3500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1980 GMC K3500. Dee Zee, KAI, and ARIES are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1980 GMC K3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1980 GMC K3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1980 GMC K3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 GMC K3500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your K3500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

FAQs for 1980 GMC K3500 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1980 GMC K3500?

Out of 41 Bodies and Fender Parts for the 1980 GMC K3500, the most popular in our inventory are:
3 Inch Round Side Bars
from $153.99
This product is not rated
3 Inch Round Side Bars
Side Bars and Sideskirts
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
from $39.49
This product is not rated
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
Splash Guard (Mud Flap)
B-Pillar/Rocker Panel
from $44.99
This product is not rated
B-Pillar/Rocker Panel
Body B-Pillar and Rocker Panels