1980 GMC Jimmy Bodies and Fender Parts
More 1980 GMC Jimmy Bodies and Fender Parts
Find your specific 1980 GMC Jimmy original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1980 GMC Jimmy Bodies and Fender Parts
Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)
from
$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Classic Diamond Style Design
- Protected By A BriteGard Powder Coat Finish
- Compliment Brite-Tread Running Boards
Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)
from
$48.49
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.
Product Features:
See More
Product Features:
- Classic Styling Of Brite-Tread Aluminum
- Front Or Rear Wheel Protection
- Radius Notch Contours To The Fender Well
- Protected By A BriteGard Powder Coat Finish
KAI – Quarter Panel Patch (Part No.RRP151)
from
$46.99
New Standard Replacement Driver Side Rear Quarter Panel Section, 60 1/2 X 28
Product Features:
See More
Product Features:
- 60 1/2 X 28, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel Patch (Part No.RRP150)
from
$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28
Product Features:
See More
Product Features:
- 60 1/2 X 28, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP083)
from
$101.99
New Standard Replacement Driver Side Extended Cab Floor, 24 X 33
Product Features:
See More
Product Features:
- 24 X 33, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP147)
from
$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29
Product Features:
See More
Product Features:
- Front Section, 22 1/4 X 29, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – B-Pillar/Rocker Panel (Part No.RRP102)
from
$46.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – B-Pillar/Rocker Panel (Part No.RRP103)
from
$47.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Backing Plate (Part No.RRP104R)
from
$13.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2
Product Features:
See More
Product Features:
- 33 1/2 X 6 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Backing Plate (Part No.RRP104)
from
$8.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4
Product Features:
See More
Product Features:
- 26 1/8 X 4 1/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Brace (Part No.GMK4143195671P)
from
$30.99
New Goodmark Front Lower Fender Brace Set, Reinforcement Set For Lower Mount Point
Product Features:
See More
Product Features:
- Reinforcement Set For Lower Mount Point
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Brace (Part No.GMK4144662731)
from
$20.99
New Goodmark Rear Fender Center Brace, For Stepside Models, 4 Required, Made Of Steel
Product Features:
See More
Product Features:
- For Stepside Models 4 Required Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Patch Panel (Part No.RRP121)
from
$18.99
New Standard Replacement Driver Side Lower Rear Tip Of Fender, 12 1/4 X 12 1/4
Product Features:
See More
Product Features:
- 12 1/4 X 12 1/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Spare Tire Bracket (Part No.GMK4144967751)
from
$54.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel
Product Features:
See More
Product Features:
- For Models With Glide-Out Spare Tire Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GMK417595589R)
from
$21.99
New Goodmark Rear Passenger Side Wheel Opening Molding, Made Of Aluminum
Product Features:
See More
Product Features:
- Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1791102)
from
$31.99
New Standard Replacement Rear Passenger Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Cab Mount Set (Part No.3.4118R)
from
$155.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Cab Mount Set (Part No.3.4104G)
from
$162.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Westin – Molded Running Boards (Part No.27-0000)
from
$442.99
Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves f
Product Features:
See More
Product Features:
- OE Style
- UV Resistant Black Molded Polymer
- Extruded Aluminum Base Board
- Cradle Mounted Boards
- Customized Mounting Brackets Sold Separately
- Adds Perfect Finishing Touch To Vehicle
- 5 Year Warranty
Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)
from
$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.
Product Features:
See More
Product Features:
- The Windflector greatly reduces sunroof wind noise and air turbulence
- Prevents the rain from entering the sunroof opening while driving
- Helps reduce heat buildup inside the vehicle
- Available in 5 different sizes for perfect fit
- No drill installation
- Installs quickly and easily with 3M automotive-grade adhesive
KAI – Rocker Panel (Part No.GMK414347067R)
from
$39.99
New Goodmark Passenger Side Outer Type Rocker Panel, 1.2MM Thick
Product Features:
See More
Product Features:
- 1.2MM Thick
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.GMK4173460691L)
from
$327.99
New Goodmark Driver Side Rocker Box
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender (Part No.GM1241122)
from
$528.99
New Standard Replacement Passenger Side Fender
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender (Part No.GM1241207)
from
$499.99
New Standard Replacement Passenger Side Fender, With ZR2, 4WD
Product Features:
See More
Product Features:
- With ZR2, 4WD, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Panel (Part No.RRP113)
from
$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12
Product Features:
See More
Product Features:
- 41 5/8 X 12, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1980 GMC Jimmy Bodies and Fender Parts Categories
1980 GMC Jimmy Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1980 GMC Jimmy. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 25 different Bodies and Fender Parts in our inventory ranging from $8.99 to $528.99. That means you can find the exact parts or products you need to keep that 1980 GMC Jimmy running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1980 GMC Jimmy. Dee Zee, Auto Ventshade (AVS), and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1980 GMC Jimmy, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1980 GMC Jimmy rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1980 GMC Jimmy Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 GMC Jimmy demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Jimmy the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular Auto Ventshade (AVS) Bodies and Fender Parts
We carry Auto Ventshade (AVS) parts in our stock across Running Boards and Steps categories, plus more. For a 1980 GMC Jimmy, our most popular Auto Ventshade (AVS) Bodies and Fender Parts include:
from
$59.99
(3)
Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc
Running Boards and Steps
FAQs for 1980 GMC Jimmy Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1980 GMC Jimmy?
Out of 25 Bodies and Fender Parts for the 1980 GMC Jimmy, the most popular in our inventory are:
from
$28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
Splash Guard (Mud Flap)
from
$48.49
This product is not rated
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
Splash Guard (Mud Flap)
from
$39.49
This product is not rated
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
Splash Guard (Mud Flap)
