1980 Ford F-350 Pickup Differentials

Name: Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings
Brand: Yukon Gear
SKU: 34040
Price: 78.99 USD

Find your specific 1980 Ford F-350 Pickup original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1980 Ford F-350 Pickup Differentials

from

$78.99

Seal housing for Ford 10.25″ & 10.5″, Zip locker, with o-rings.

Product Features:

Seal housing for Ford 10.25″ and 10.5″
Includes o-rings

from

$35.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$289.99

This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and br

Product Features:

Fits Dana Ford 10.25″
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.

from

$404.99

Yukon Carbon Clutch kit with 14 Plates for 10.25″ and 10.5″ Ford posi, Eaton style.

Product Features:

Clutch kit
Fits Ford 10.25″ with Eaton positraction
Carbon fiber clutches

from

$244.99

Yukon long yoke for ’93 and newer Ford 10.25″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1993 and up Ford 10.25″
31 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
Strap style

from

$659.99

Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$44.99

Product Features:

Spring kit for Dana Spicer 28, AMC Model 35 IFS, Dana Spicer 44 IFS and Dana Spicer 50 IFS
Allows for installation of positraction or locker

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

from

$9.99

Product Features:

Inner oil slinger for Dana Spicer 60

from

$2.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$18.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$20.29

Product Features:

Brand may vary by location

from

$34.99

10.25″ Ford ” OEM” pinion seal.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Ford 10.25″

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$7.99

Repleacement ring gear bolt for Dana 80. 9/16″ x 18.

Product Features:

Ring gear bolt for Dana Spicer 80
9/16″ x 18 thread

from

$1487.99

The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:

Fits Ford 10.25″ and 10.5″
Forged case and 8620 internals for added strength
Works with a variety of air delivery systems
Assembled in the USA

from

$4.99

Product Features:

Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
Fits standard open differentials only

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$1025.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:

Fits Dana Spicer 60 with 30 spline axles
4.10 and down ratio only
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$10.99

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:

Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
7/8″ x 20 thread
1 1/8″ socket

from

$376.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Dana Spicer 80
11.25″ ring gear diameter
37 spline pinion
12 ring gear bolts
4.63 ratio

from

$1175.00

Differential

from

$1355.00

Yukon front 4340 Chrome-Moly replacement axle kit for ’88-’98 Ford, Dana 60 with 35 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Dana U/joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

35 spline inner and outer axles
Fits Dana Spicer 60 in 1988-1998 F350
Includes inner and outer 4340 Chromoly axles and Spicer U-Joints

from

$292.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits IFS Dana Spicer 50
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$11.99

Cross pin bolt with 5/16 x 18 thread for 10.25″ Ford.

Product Features:

Cross pin bolt for Ford 9.75″ and 10.25″ with c-clip axles
5/16″ x 18 thread

from

$55.99

Product Features:

MINI INSTALL KIT FORD 10.25

Popular 1980 Ford F-350 Pickup Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Differential Lock Springs

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential and Pinion Shim Kits

Maybe you’re in the middle of a full rebuild of that 1980 Ford F-350 Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 281 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1980 Ford F-350 Pickup running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Ford F-350 Pickup. National, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1980 Ford F-350 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 192 reviews in this category, some of the top rated parts include Differential Ring And Pinion Set with 4.3 stars and DIFFERENTIAL GASKET with 3.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1980 Ford F-350 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1980 Ford F-350 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Ford F-350 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-350 Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Pinion Pilot Bearings and Differential Pinion Seals categories, plus more. For a 1980 Ford F-350 Pickup, our most popular National Differentials include:

from $43.99

(2)

Shaft Repair Sleeve

Differential Pinion Pilot Bearings

from $23.29

(4)

Multi Purpose Seal

Differential Pinion Seals

from $22.99

(3)

Bearings

Differential Bearings

Top 1980 Ford F-350 Pickup Differentials from National

National products are another trusted brand when it comes to Differentials for your 1980 Ford F-350 Pickup. Popular National parts include:

from $9.99

(8)

Bearings

Rear Differential Pinion Bearings

FAQs for 1980 Ford F-350 Pickup Differentials

What are the most purchased Differentials for the 1980 Ford F-350 Pickup?

Out of 281 Differentials for the 1980 Ford F-350 Pickup, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $6.49

(10)

Axle Housing Cover Gasket

Rear Housing Cover Gaskets

from $5.99

This product is not rated

Pinion Crush Sleeves

Differential Crush Sleeves

What are the top-rated 1980 Ford F-350 Pickup Differentials?

Top-rated Differentials for your 1980 Ford F-350 Pickup based on customer reviews/ratings are:

from $231.99

(10)

Differential Ring And Pinion Set

“Exactly matched OEM part. Good value.”

from $8.29

(4)

DIFFERENTIAL GASKET

“Great Product”

from $10.49

(3)

Oil Seal

“Fit the rear Dana 44 on my TJ just fine and stopped the leaking.”

1980 Ford F-350 Pickup Differentials

More 1980 Ford F-350 Pickup Differentials

Essential 1980 Ford F-350 Pickup Differentials

Yukon Gear – Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings (Part No.34040)

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

USA Standard Gear – Bearing Kit For Ford 10.25" (Part No.58005)

Yukon Gear – Carbon Clutch Kit With 14 Plates For 10.25" And 10.5" Ford Posi, Eaton Style (Part No.16099)

Yukon Gear – Long Yoke For ’93 And Newer Ford 10.25" With A 1350 U/Joint Size (Part No.41040)

Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)

Yukon Gear – Spring Kit For Dana 28, Model 35IFS, Dana 44IFS & Dana 50IFS With Grizzly, Detroit, Tt Or Pl (Part No.33263)

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Pro-King – Differential Crush Sleeve (Part No.761A034)

National – Bearings (Part No.382S)

Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)

Yukon Gear – 10.25" Ford " Oem" Pinion Seal (Part No.30253)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)

Yukon Gear – Zip Locker For Ford 10.25" & 10.5", Full Float Only (Part No.34025)

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Grizzly Locker For Dana 60, 4.10 & Down, 30 Spline (Part No.28002)

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 80 In A 4.63 Ratio (Part No.36097)

Yukon Gear – Differential (Part No.26045)

Yukon Gear – Front 4340 Chrome-Moly Replacement Axle Kit For ’88-’98 Ford, Dana 60 With 35 Splines (Part No.21402)

Yukon Gear – Pinion Install Kit For Dana 50 IFS Differential (Part No.13030)

Yukon Gear – Cross Pin Bolt With 5/16 X 18 Thread For 10.25" Ford (Part No.33241)

Motive Gear – Differential Gear Install Kit (Part No.F10.25IK)

Popular 1980 Ford F-350 Pickup Differentials Categories