1980 Ford Bronco Fuel and Emissions Systems

Please Select your Vehicle to See Exact Fit Parts

Essential Fuel and Emissions Systems for 1980 Ford Broncos

Carquest Premium – Multi-Use Connector (Part No.FSA1013)

Multi-Use Connector

from

$19.79
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Edelbrock – EGR Valve Gasket #3896 For #3721, #3723, #3781, And #3783 Manifolds 2V (Part No.3897)

EGR Valve Gasket #3896 For #3721, #3723, #3781, And #3783 Manifolds 2V

from

$23.99
Product Features:
  • Core Reinforced Composite Material
  • Works With Edelbrock Manifold Part #3721, #3723, #3781, #3783
  • OEM Replacement
  • 2-Barrel
  • Made In The USA
See More

Victor Reinz – Fuel Injection Idle Air Control Valve Gasket (Part No.71-13739-00)

Fuel Injection Idle Air Control Valve Gasket

from

$2.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Dorman – Evaporative Emissions Charcoal Canister (Part No.911-198)

Evaporative Emissions Charcoal Canister

from

$99.99
This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:
  • Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
  • Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1511469)

Fuel Tank Lock Ring

from

$21.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:
  • Engineered to meet or exceed all OEM specifications.
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1517)

Fuel Pump Block-Off Plate

from

$19.49
Block-off plates are precision cut to cover stock fuel pump openings. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Gasket Included
  • Easy Installation
See More

KAI – Fuel Tank Strap (Part No.TNKST26)

Fuel Tank Strap

from

$49.99
New Standard Replacement Fuel Tank Strap Kit, 29 1/8 Inch Straps, Pair

Product Features:
  • 29 1/8 Inch Straps
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Edelbrock – Victor Series fuel pump is for 289-351W Ford (Part No.1715)

Victor Series fuel pump is for 289-351W Ford

from

$192.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

Carquest Premium – Diverter Valve (Part No.ECC2322)

Diverter Valve

from

$239.99
The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions and convert the emission into harmless water vapor via a chemical reaction. These systems were used heavily in the pre-catalytic converter emission control period but found some application in vehicles with catalytic converter systems.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35940 For Ford SB Windsor 289, 302 (Part No.35940)

Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35940 For Ford SB Windsor 289, 302

from

$2571.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35940 for Small-Block Ford 289W-347W C.

Product Features:
  • The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
  • Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
  • The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
  • It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
  • We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
  • The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
  • The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
  • E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
  • The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)

Fuel Tank Vent Rollover Valve

from

$27.99
This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles
  • Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Fuel Tank (Part No.576-153)

Steel Fuel Tank

from

$134.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:
  • Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
  • Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
  • Quality assured – this part has been validated to ensure a quality fit and long service life
  • Trustworthy design – backed by team of product specialists in the United States
See More

Dorman – Steel Fuel Tank (Part No.576-159)

Steel Fuel Tank

from

$206.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:
  • Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
  • Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
  • Quality assured – this part has been validated to ensure a quality fit and long service life
  • Trustworthy design – backed by team of product specialists in the United States
See More

Carquest Premium – Fuel Tank Selector Valve (Part No.FSC1007)

Fuel Tank Selector Valve

from

$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

GM Genuine Parts – Fuel Tank Selector Valve (Part No.U7001)

Fuel Tank Selector Valve

from

$152.99
GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Fuel Tank Vent Valve Seal Grommet (Part No.926-820)

Fuel Tank Vent Valve Seal Grommet

from

$12.99
This fuel tank vent valve seal acts as a gasket between the fuel tank and rollover valve to prevent debris or moisture from entering the tank, and fuel or vapor from exiting. Check the product dimensions and vehicle fitment information to select the correct seal for your application.

Product Features:
  • Direct replacement – this fuel tank vent valve seal is designed to match the fit and function of the original equipment gasket in specified applications
  • Ideal solution – engineered to securely seal the vent valve to the fuel tank when the original seal is leaking or has failed from exposure to fuel
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1004)

Secondary Air Injection Pump Check Valve

from

$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1031)

Secondary Air Injection Pump Check Valve

from

$39.99
The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)

Reducer w/O2 Sensor Fitting

from

$73.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)

Reducer w/O2 Sensor Fitting

from

$73.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

DENSO – Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit (Part No.234-4071)

Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit

from

$59.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: Upstream, 3 Wire, 10.94" Long, Heated, Exact Fit (Part No.234-3002)

Oxygen Sensor: Upstream, 3 Wire, 10.94" Long, Heated, Exact Fit

from

$58.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Motorcraft – O2 Sensor (Part No.DY-1401)

O2 Sensor

from

$89.99
O2 Sensor

Carquest Premium – Locking Fuel Tank Cap (Part No.10593)

Locking Fuel Tank Cap

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
  • Independently tested for emission control
See More

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC817T)

Non-Locking Tethered Fuel Tank Cap

from

$24.29
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Locking Fuel Tank Cap

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Upgrade your 1980 Ford Bronco with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1980 Ford Bronco, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Bronco functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Fuel and Emissions Systems for the 1980 Ford Bronco, designed to meet your needs without breaking the bank. From Fuel Tank replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1980 Ford Bronco at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.99 to $2,571.99, with an average price of $152.96. Our 46 Fuel and Emissions Systems in stock come from 15 trusted brands, so you’re sure to find the right part for your 1980 Ford Bronco without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 Ford Bronco, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, Felpro, Carquest Premium, and more. Bosch Fuel and Emissions Systems start at just $39.99 and boast an impressive 4.7 stars average rating from customers. Felpro and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $3.99, and at an average 4.6 stars rating. With 175 customer reviews and counting, our 1980 Ford Bronco Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1980 Ford Bronco is always ready to roll. We’re committed to providing you with everything you need to keep your Bronco in top shape, all in one place. Start shopping confidently below for your 1980 Ford Bronco!

Best-Selling Fuel Tanks for 1980 Ford Broncos

Enhance the driving experience in your Ford with 16 quality Fuel Tank components, starting at $10.49.

Dorman – Fuel Pump Lock Ring (Part No.579-003)

Fuel Pump Lock Ring

from

$10.49
This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.

Product Features:
  • Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
  • Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

GM Genuine Parts – Fuel Tank Selector Valve (Part No.U7000)

Fuel Tank Selector Valve

from

$108.99
GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Tank Selector Valve (Part No.U7001)

Fuel Tank Selector Valve

from

$152.99
GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)

Fuel Tank Vent Rollover Valve

from

$27.99
This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles
  • Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Steel Fuel Tank (Part No.576-154)

Steel Fuel Tank

from

$224.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:
  • Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
  • Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
  • Quality assured – this part has been validated to ensure a quality fit and long service life
  • Trustworthy design – backed by team of product specialists in the United States
See More

Spectra Premium – Fuel Tank (Part No.F8C)

Fuel Tank

from

$171.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Dorman – Steel Fuel Tank (Part No.576-159)

Steel Fuel Tank

from

$206.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:
  • Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
  • Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
  • Quality assured – this part has been validated to ensure a quality fit and long service life
  • Trustworthy design – backed by team of product specialists in the United States
See More

Carquest Premium – Fuel Tank Selector Valve (Part No.FSC1007)

Fuel Tank Selector Valve

from

$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Fuel Tank Strap (Part No.TNKST26)

Fuel Tank Strap

from

$49.99
New Standard Replacement Fuel Tank Strap Kit, 29 1/8 Inch Straps, Pair

Product Features:
  • 29 1/8 Inch Straps
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Spectra Premium – Fuel Tank (Part No.F9C)

Fuel Tank

from

$190.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Carquest Premium – Fuel Tank Selector Valve (Part No.ECC2955)

Fuel Tank Selector Valve

from

$173.99
The electronic universal fuel tank selector is a two-way valve designed to direct fuel from a single tank when commanded, on a dual fuel tank vehicle application. With aid from an electrical switch located inside the vehicle cabin, the vehicle operator can select one of two fuel tanks to provide fuel to the vehicle’s engine. When electrically connected correctly, the selector valve will also provide the fuel level sender signal from each fuel tank onto the instrument cluster fuel gauge.

Product Features:
  • Product constructed to provide long-life operation
See More

Carquest Premium – Fuel Tank Selector Valve: 6 Ports, with Toggle Switch, with Pigtail Connector (Part No.FSC1011)

Fuel Tank Selector Valve: 6 Ports, with Toggle Switch, with Pigtail Connector

from

$102.99
The electronic universal fuel tank selector is a two-way valve designed to direct fuel from a single tank when commanded, on a dual fuel tank vehicle application. With aid from an electrical switch located inside the vehicle cabin, the vehicle operator can select one of two fuel tanks to provide fuel to the vehicle’s engine. When electrically connected correctly, the selector valve will also provide the fuel level sender signal from each fuel tank onto the instrument cluster fuel gauge.

Product Features:
  • Product constructed to provide long-life operation
  • 6 Ports
  • Universal
  • Includes: Selector Valve, Toggle Switch and Pigtail Connector
See More

KAI – Fuel Tank Strap (Part No.FST010026)

Fuel Tank Strap

from

$37.99
New Platinum Pro Fuel Tank Straps

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Multi-Use Connector (Part No.FSA1013)

Multi-Use Connector

from

$19.79
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Dorman – Fuel Tank Vent Valve Seal Grommet (Part No.926-820)

Fuel Tank Vent Valve Seal Grommet

from

$12.99
This fuel tank vent valve seal acts as a gasket between the fuel tank and rollover valve to prevent debris or moisture from entering the tank, and fuel or vapor from exiting. Check the product dimensions and vehicle fitment information to select the correct seal for your application.

Product Features:
  • Direct replacement – this fuel tank vent valve seal is designed to match the fit and function of the original equipment gasket in specified applications
  • Ideal solution – engineered to securely seal the vent valve to the fuel tank when the original seal is leaking or has failed from exposure to fuel
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Most Popular 1980 Ford Bronco Fuel Injectors

Customize your Ford with 4 Fuel Injectors products like Fuel Injector Gaskets and Fuel Injection System, all priced under $2,571.99.

Felpro – Carburetor Mounting Gasket (Part No.60244)

Carburetor Mounting Gasket

from

$4.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
  • Includes rear main seal, timing cover gasket sand seals and fuel pump gaskets.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35940 For Ford SB Windsor 289, 302 (Part No.35940)

Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35940 For Ford SB Windsor 289, 302

from

$2571.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35940 for Small-Block Ford 289W-347W C.

Product Features:
  • The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
  • Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
  • The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
  • It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
  • We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
  • The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
  • The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
  • E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
  • The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
See More

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35950 For Ford SB Windsor 351 (Part No.35950)

Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35950 For Ford SB Windsor 351

from

$2542.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35950 for Small-Block Ford 351W C.

Product Features:
  • The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
  • Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
  • The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
  • It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
  • We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
  • The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
  • The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
  • E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
  • The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
See More

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35930 For Ford SB Windsor 289, 302 (Part No.35930)

Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35930 For Ford SB Windsor 289, 302

from

$2542.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35930 for Small-Block Ford 289W-302W C.

Product Features:
  • The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure
  • Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
  • The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
  • It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
  • We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
  • The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
  • The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
  • E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
  • The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
See More

Top Picks for 1980 Ford Bronco Oxygen Sensors

Upgrade Ford Broncos with top-quality Oxygen Sensors parts, including 4 OEM and aftermarket selections for your 1980 model.

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)

Reducer w/O2 Sensor Fitting

from

$73.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit

from

$39.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)

Reducer w/O2 Sensor Fitting

from

$73.99


Product Features:
  • Reducer With O-Sensor Fitting
  • Made In USA
See More

NTK – Premium OE Fit & Design Spark Plug Wire Set: Variable Pitch Mag Core, 3 Leads (Part No.23552)

Premium OE Fit & Design Spark Plug Wire Set: Variable Pitch Mag Core, 3 Leads

from

$49.99
NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

In-Demand Gas Caps for 1980 Ford Broncos

Select from 2 premium Gas Caps parts for your 1980 Ford Bronco, with prices ranging from $12.99 to $24.99.

Carquest Premium – Locking Fuel Tank Cap (Part No.10593)

Locking Fuel Tank Cap

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
  • Independently tested for emission control
See More

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10818)

Non-Locking Fuel Tank Cap

from

$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
  • Independently tested for emission control
See More

Most Sold 1980 Ford Bronco Fuel Pumps

Explore our best-selling Ford parts for the 1980 Bronco among 13 OEM and aftermarket options starting from $3.99.

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Holley – Mechanical Fuel Pump (Part No.12-289-11)

Mechanical Fuel Pump

from

$185.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 110 gph Free Flow
  • Shutoff Pressure Pre-Set From 6.5 To 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
  • Inlet/Outlet Tapped For 3/8 in. NPT
See More

Holley – Mechanical Fuel Pump (Part No.12-833)

Mechanical Fuel Pump

from

$139.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • Street Performance
  • Flows 80 gph Free Flow
  • Shutoff Pressure Pre-Set 7.5 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Various Plumbing Situations
  • Inlet And Outlet Tapped For 1/4 in. NPT
  • Inlet/Outlet Tapped For .25 in. NPT
See More

Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.360584)

Mechanical Fuel Pump: Includes Gasket

from

$55.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.260585)

Mechanical Fuel Pump: Includes Gasket

from

$26.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1517)

Fuel Pump Block-Off Plate

from

$19.49
Block-off plates are precision cut to cover stock fuel pump openings. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Gasket Included
  • Easy Installation
See More

Delphi – Mechanical Fuel Pump: With Gaskets (Part No.MF0162)

Mechanical Fuel Pump: With Gaskets

from

$32.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Frame mounted mechanical unit
  • Always check the fuel filter when replacing the fuel pump
  • Gaskets included
See More

Edelbrock – Victor Series fuel pump is for 289-351W Ford (Part No.1715)

Victor Series fuel pump is for 289-351W Ford

from

$192.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

Holley – Mechanical Fuel Pump (Part No.12-289-13)

Mechanical Fuel Pump

from

$235.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 130+ gph Free Flow
  • Shutoff Pressure Pre-Set From 7.5 To 9 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
See More

Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-289-20)

Keith Dorton Series; VoluMax Race Series Fuel Pump

from

$255.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated

Product Features:
  • High Output Fuel Flow
  • Flows 170+ gph Free Flow
  • Shutoff Pressure Pre-Set At 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
See More

Top Street Performance – Black Ford Small Block V8 (221-351W) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1007BK)

Black Ford Small Block V8 (221-351W) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump

from

$53.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.

Product Features:
  • Free Flow: 80 GPH
  • Pressure: 6 PSI
  • Housing Material: Aluminum
  • Inlet and Outlet: 1/4 in NPT Female
See More

Top Street Performance – Ford Small Block V8 (221-351W) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1007C)

Ford Small Block V8 (221-351W) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump

from

$53.99
TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.

Product Features:
  • Free Flow: 80 GPH
  • Pressure: 6 PSI
  • Housing Material: Aluminum
  • Inlet and Outlet: 1/4 in NPT Female
See More

Spectra Premium – Mechanical Pump (Part No.SP1012MP)

Mechanical Pump

from

$21.79
CARQUEST mechanical fuel pumps are the only mechanical fuel pumps manufactured in the USA. These pumps are precision-cast units designed to meet or exceed OEM specifications and are built with enhanced, long-lasting components.

Product Features:
  • Special heat treated rocker arms and case-hardened pins to ensure long-lasting performance
  • Upgraded seals and pump diaphragms for compatibility with modern multi-fuel blends
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1980 Ford Bronco

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1980 Ford Broncos. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, Felpro, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1980 Bronco start at just $3.99 and are rated as high as 4.7 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 1980 Ford Bronco Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1980 Ford Bronco, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 1980 Ford Bronco. With over 1 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $39.99. Plus, with over 31 customer reviews and an average rating of 4.7 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit
from $39.99
(31)
Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit
“Works great in my 1997 Saturn SL2. No more P0133 error codes.”

Popular Felpro 1980 Ford Bronco Fuel and Emissions Systems

Felpro auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1980 Ford Bronco owner should feel confident when installing genuine Felpro parts in their vehicle. To ensure the best fit and performance for your 1980 Bronco, Advance Auto Parts carries a full inventory of 1 Felpro Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Felpro Fuel and Emissions Systems range up to $3.99, plus, with more than 26 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
Fuel Pump Mounting Gasket
from $3.99
(26)
Fuel Pump Mounting Gasket
“Needed for pump that was bought”

FAQs for 1980 Ford Bronco Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1980 Ford Broncos?

Out of 46 Fuel and Emissions Systems that fit 1980 Ford Broncos, the following parts are the top sellers:

What’s the price range for 1980 Ford Bronco Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1980 Ford Bronco start at $1.99 and go up to $2,571.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1980 Ford Bronco?

The average price for Fuel and Emissions Systems for the 1980 Ford Bronco is $152.96. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford Bronco model years?

Yes, we currently carry Fuel and Emissions Systems for 33 model years of Ford Broncos between 1966 and 2025. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 1996, 1995, 1994, 1993, 1992, and 1991.

What are the cheapest Fuel and Emissions Systems for my 1980 Ford Bronco?

The cheapest 1980 Ford Bronco Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 1980 Ford Bronco?

As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 1980 Ford Bronco:

Can I get help with 1980 Ford Bronco Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford Bronco Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford Bronco Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.