1980 Dodge D50 Steering and Chassis Parts
Find Your Specific 1980 Dodge D50 Steering and Chassis Parts
Below you will find various in-demand Dodge Steering and Chassis Parts, components and accessories for your 1980 D50. Advance Auto Parts has popular D50 parts like Tie Rods, Gear Boxes, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other D50 model years including
1979 and more. Select a category of 1980 Dodge D50 Steering and Chassis Parts below and start saving instantly.
Popular 1980 Dodge D50 Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 1980 Dodge D50s
Rare Parts – Tie Rod Sleeve (Part No.RP26206)
from
$51.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Imperial – Quick Connect Coupler (Part No.240250)
from
$7.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
- Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
- Compatible with OEM cooler systems
- Made of brass
- Quality construction
Rare Parts – Sway Bar Link Kit (Part No.RP18222)
from
$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Dorman – Steering Idler Arm Bushing Kit (Part No.533-614)
from
$20.49
This steering idler arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Ball Joint (Part No.RP10387)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Strut Rod Bushing (Part No.RP16862)
from
$33.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces tire wear
- Improves handling while breaking
- Aids in alignment of vehicle
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
National – Bearing Race (Part No.HM89410)
from
$11.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Powercraft – Pump Seal Kit (Part No.8631)
from
$14.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Return Hose Assembly, 16mm Male Inv. Flare x 3/8" I.D. Hose (Part No.36799)
from
$101.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
National – Multi-Purpose Seal (Part No.222820)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Rare Parts – Tie Rod End (Part No.RP26312)
from
$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP26515)
from
$51.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Pitman Arm (Part No.RP20422)
from
$76.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Restores OE alignment
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Complete Rebuild Kit (Part No.8630)
from
$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – 1/2" I.D. Reservoir Hose (Part No.36209)
from
$43.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – 1/2" I.D. Reservoir Hose (Sold by foot) (Part No.34997)
from
$9.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- PLEASE NOTE: Priced and sold by the foot. See store for details.
- Rated at 275 Deg. F
- Inner Diameter: 1/2″
Rare Parts – Steering Damper (Part No.RP50133)
from
$159.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Helps eliminate uncontrolled steering or wobble
Rare Parts – Sway Bar Link Kit (Part No.RP22192)
from
$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Driveworks – Sway Bar Link Kit (Part No.DW-K9231)
from
$15.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Rare Parts – Sway Bar Link Kit (Part No.RP16146)
from
$26.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Carquest Premium – Stabilizer Bar Link (Part No.500-94473)
from
$19.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)
from
$91.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
- Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures
Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)
from
$40.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)
from
$13.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Upgrade your 1980 Dodge D50 with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 1980 Dodge D50, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Steering and Chassis Parts are key to keeping your D50 functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Steering and Chassis Parts for the 1980 Dodge D50, designed to meet your needs without breaking the bank.
From
Tie Rod
replacements to
Gear Boxes
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1980 Dodge D50 at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $7.99 to $159.99, with
an average price of $39.97.
Our 32 Steering and Chassis Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 1980 Dodge D50 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 Dodge D50, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog Driveworks, and more.
Moog Steering and Chassis Parts
start at just $22.99 and boast an impressive 4.5 stars average rating from customers.
With 236 customer reviews and counting, our 1980 Dodge D50 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1980 Dodge D50 is always ready to roll. We’re committed to providing you with everything you need to keep your D50 in top shape, all in one place.
Start shopping confidently below for your 1980 Dodge D50!
Best-Selling Tie Rods for 1980 Dodge D50s
Enhance the driving experience in your Dodge with 3 quality Tie Rod components, starting at $35.99.
Rare Parts – Tie Rod Sleeve (Part No.RP26206)
from
$51.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Rare Parts – Tie Rod End (Part No.RP26312)
from
$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP26515)
from
$51.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Most Popular 1980 Dodge D50 Gear Boxes
Customize your Dodge with 2 Gear Boxes products
like Steering Stabilizers and
Steering Gear Box Seals, all
priced under $159.99.
National – Multi-Purpose Seal (Part No.222820)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Rare Parts – Steering Damper (Part No.RP50133)
from
$159.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Helps eliminate uncontrolled steering or wobble
Top Picks for 1980 Dodge D50 Ball Joints
Upgrade Dodge D50s with top-quality Ball Joints parts, including 2 OEM and aftermarket selections for your 1980 model.
Rare Parts – Ball Joint (Part No.RP10387)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Ball Joint (Part No.RP10386)
from
$41.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
In-Demand Sway Bars for 1980 Dodge D50s
Select from 9 premium Sway Bars parts for your 1980 Dodge D50, with prices ranging from $15.99 to $52.99.
Driveworks – Sway Bar Link Kit (Part No.DW-K9231)
from
$15.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
MOOG – Suspension Stabilizer Bar Link Kit (Part No.K700530)
from
$22.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- The Grade 8 coated bolt makes the link extremely durable
- Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
- Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
- Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
- Black phosphate barrel nut and washers provide corrosion protection.
MOOG – Suspension Stabilizer Bar Link (Part No.K7306)
from
$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Driveworks – Suspension Stabilizer Bar Link Kit (Part No.DW-K7306)
from
$43.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
Carquest Premium – Stabilizer Bar Link (Part No.500-94473)
from
$19.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
Rare Parts – Sway Bar Link Kit (Part No.RP16146)
from
$26.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Rare Parts – Sway Bar Link Kit (Part No.RP18222)
from
$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Rare Parts – Sway Bar Link Kit (Part No.RP22192)
from
$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Rare Parts – Stabilizer Link Kit (Part No.RP17113)
from
$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Most Sold 1980 Dodge D50 Power Steering Parts
Explore our best-selling Dodge parts for the 1980 D50 among 13 OEM and aftermarket options starting from $7.99.
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Quick Connect Coupler (Part No.240250)
from
$7.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
- Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
- Compatible with OEM cooler systems
- Made of brass
- Quality construction
Carquest Premium – 1/2" I.D. Reservoir Hose (Sold by foot) (Part No.34997)
from
$9.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- PLEASE NOTE: Priced and sold by the foot. See store for details.
- Rated at 275 Deg. F
- Inner Diameter: 1/2″
National – Bearing Race (Part No.HM89410)
from
$11.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – 1/2" I.D. Reservoir Hose (Part No.36209)
from
$43.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – Return Hose Assembly, 16mm Male Inv. Flare x 3/8" I.D. Hose (Part No.36799)
from
$101.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)
from
$91.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
- Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures
Carquest Premium – Power Steering Filter (Part No.20-0012FCQN)
from
$53.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)
from
$40.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Powercraft – Pump Complete Rebuild Kit (Part No.8630)
from
$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8631)
from
$14.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)
from
$13.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Top-Rated Steering and Chassis Parts Brands For Your 1980 Dodge D50
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1980 Dodge D50s. Below you’ll find some of our best rated Steering and Chassis Parts from Moog and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 1980 D50 start at just $15.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 1980 Dodge D50 Steering and Chassis Parts
When it comes to maintaining or upgrading your 1980 Dodge D50, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 1980 Dodge D50. With over 2 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $22.99, with an average price of just $37.99. Plus, with over 9 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$22.99
(3)
Suspension Stabilizer Bar Link Kit
“The design of this part is excellent. There is still hope left in the world. i will never buy another brand of stabilizer link. the washers inherently”
Popular Driveworks 1980 Dodge D50 Steering and Chassis Parts
Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1980 Dodge D50 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1980 D50, Advance Auto Parts carries a full inventory of 2 Driveworks Steering and Chassis Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $15.99 to $43.99, plus, with more than 20 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 1980 Dodge D50 Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 1980 Dodge D50s?
Out of 32 Steering and Chassis Parts that fit 1980 Dodge D50s, the following parts are the top sellers:
- Suspension Stabilizer Bar Link Kit (15510476) – $43.99
- 1/2" I.D. Reservoir Hose (Sold by foot) (18071110) – $9.99
- Stabilizer Bar Link (12090384) – $19.99
What’s the price range for 1980 Dodge D50 Steering and Chassis Parts?
Steering and Chassis Part prices for the 1980 Dodge D50 start at $7.99 and go up to $159.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 1980 Dodge D50?
The average price for Steering and Chassis Parts for the 1980 Dodge D50 is $39.97. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Steering and Chassis Parts for my 1980 Dodge D50?
The cheapest 1980 Dodge D50 Steering and Chassis Parts we carry in stock are:
- Quick Connect Coupler (15230008) – $7.99
- Multi-Purpose Seal (18442636) – $8.99
- 1/2" I.D. Reservoir Hose (Sold by foot) (18071110) – $9.99
- Bearing Race (5052416) – $11.49
- Pump Drive Shaft Seal Kit (18071199) – $13.49
What are the top-rated Steering and Chassis Parts that fit the 1980 Dodge D50?
Out of 236 reviews by customers, our 1980 Dodge D50 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1980 Dodge D50 and their top-rated products:
- Sway Bars
- Suspension Stabilizer Bar Link (20516941) – $52.99
- Sway Bar Link Kit (15510470) – $15.99
- Suspension Stabilizer Bar Link Kit (10575040) – $22.99
What types of Steering and Chassis Parts do you sell for my 1980 Dodge D50?
As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 1980 Dodge D50:
Can I get help with 1980 Dodge D50 Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Steering and Chassis Parts and more.
What is your return policy for Dodge D50 Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Dodge D50 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
