1980 Dodge B200 Clutch Systems
More 1980 Dodge B200 Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1980 Dodge B200, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1980 Dodge B200 Clutch Systems
B & M – Flexplate, TF 727 383 CID (Part No.10237)
from
$149.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1971-up Chrysler, Dodge and Plymouth 383, 400 and 440ci (externally balanced cast crankshaft) V8 engines with A727 transmission. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 and 11.125 inch bolt patterns and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
LuK – OE Quality Flywheel (Part No.LFW219)
from
$136.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
Carquest Premium – New Flywheel (Part No.50-3409)
from
$119.99
Flywheel hot spots can cause chatter. Resurfacing a flywheel doesn’t always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.
Product Features:
See More
Product Features:
- Casting process closely monitored to ensure uniform density and balance retention
- Eliminates chance of chatter due to hot spots not always removed by resurfacing
- New ring gear ensures positive starter engagement
- Engineered to properly fit the intended application with no modifications
Hays – Performance; Flywheel (Part No.11-430)
from
$461.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
LuK – Clutch Kit: 10 3/8" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.05-029)
from
$178.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 11 7/8" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.05-062)
from
$173.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Carquest Premium – New Clutch Set (Part No.MU1525-1)
from
$182.99
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).
Product Features:
See More
Product Features:
- New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
- Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
- Alignment tool included where available to ensure professional installation
- Where required, includes new pilot bearing or bushing to complete the job
LuK – Clutch Kit: 11" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.05-016)
from
$178.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
ATP – FLYWHEEL SHIM (Part No.TS-5)
from
$30.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.TS-4)
from
$22.99
FLYWHEEL SHIM
ATP – Flywheel Ring Gear (Part No.ZA-510)
from
$38.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Flywheel Ring Gear (Part No.ZA-505)
from
$27.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Flywheel Ring Gear (Part No.ZA-507)
from
$30.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
National – Multi Purpose Bearing (Part No.1505)
from
$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.614036)
from
$45.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 1980 Dodge B200 Clutch Systems Categories
1980 Dodge B200 Clutch Systems
You count on your 1980 Dodge B200 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 18 Clutch Systems ranging in price from $13.29 to $182.99, you’re sure to find everything you need for your 1980 Dodge B200.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 7 different brands like DriveWorks, ATP, and LuK. 1980 Dodge B200 Clutch Systems start as low as $13.29!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 151 extensive product reviews on 1980 Dodge B200 Clutch Systems.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1980 Dodge B200 below to get started!
Top-Rated Clutch Systems Brands For Your 1980 Dodge B200
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Dodge B200 running right for years to come. In our inventory you’ll find brands like DriveWorks, ATP, LuK, and even more.
Popular Carquest Premium Clutch Systems
You’ll find popular Carquest Premium brand products across Flywheels and Clutch Kits. All are waiting to get your 1980 Dodge B200 back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 1980 Dodge B200 Clutch Systems
What are the most purchased Clutch Systems for the 1980 Dodge B200?
Out of 18 Clutch Systems for the 1980 Dodge B200, the most popular in our inventory are:
