1980 Chevrolet K30 Exhaust Parts
More 1980 Chevrolet K30 Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1980 Chevrolet K30, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1980 Chevrolet K30 Exhaust Parts
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21910)
from
$105.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Tail Pipe Aluminized 51" (Part No.45823)
from
$44.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 55.5" (Part No.45824)
from
$71.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-278)
from
$333.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Flowtech – Ceramic Header (Part No.31530FLT)
from
$463.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-159)
from
$151.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Double Ended Stud – 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in (Part No.29201)
from
$8.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In. (Part No.03147)
from
$11.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Dorman – Help – Exhaust Flange Spring – 0.50 In. ID x .75 In. OD x 1.13 In. Length (Part No.03080)
from
$8.29
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Constructed of durable spring steel
- Rust and corrosion resistant
- Also available in a kit that include the Exhaust Manifold Bolt
- Easy installation
Flowtech – Super Street; Header Dual Kit (Part No.51525FLT)
from
$223.99Product Features:
- Increase Performance
- Heavy Duty
- Header Dual Kit
- Includes All Hardware
- Installation Instructions
- Offer Maximum Versatility
- Mufflers Not Included
Thrush – 89024 Exhaust System Kit (Part No.89024)
from
$327.99
Upgrade your vintage muscle car’s exhaust system with a Thrush® Turbo Header Back System. Featuring Thrush Turbo mufflers with reversible flow chambers, spun-locked heads and aluminized construction, it has everything needed for installation.
Product Features:
See More
Product Features:
- ENGINEERED TO LAST — Features 2.5-in. aluminized smooth bend pipes
- CLASSIC SOUND — Features Thrush® Turbo mufflers with tri-flow design with reversible flow chambers for that classic Thrush sound
- STRONG AND DURABLE — Muffler has a 100% aluminized-coated shell and spun lock heads for long life
- EASY TO INSTALL — Bolt-on installation for an easy upgrade; no fabrication or welding required
Hooker Headers – Dual Competition Header Back Exhaust System Kit (Part No.16526HKR)
from
$293.99
Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.
Product Features:
See More
Product Features:
- Reducer Flex-Tubes
- Reduces Backpressure
- Hardware Included
- Instructions Included
Remflex – Flexible Graphite, Set Of 2, 1-17/32 Inch X 1-19/32 Inch Square Port Size (Part No.2005)
from
$37.49
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66124)
from
$48.99
Seal-4-Good Header Flange Gasket
Remflex – Flexible Graphite, Set Of 2, 1-13/16 Inch X 1-7/8 Inch Square Port Size (Part No.2003)
from
$42.49
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.9672)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31394)
from
$19.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1201)
from
$18.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 0.75″ Overall Length
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 0.75"L, Hex Head, Natural, Ss, Set Of 16 (Part No.400-1102)
from
$40.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Side Exit – Pair (Part No.15803)
from
$219.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Popular 1980 Chevrolet K30 Exhaust Parts Categories
1980 Chevrolet K30 Exhaust Parts
You count on your 1980 Chevrolet K30 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 94 Exhaust Parts ranging in price from $1.99 to $956.99, you’re sure to find everything you need for your 1980 Chevrolet K30.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 14 different brands like Felpro, Dorman, and Flowmaster Inc.. 1980 Chevrolet K30 Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 402 extensive product reviews on 1980 Chevrolet K30 Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Direct Fit Exhaust Manifold: Without Heat Shield with 1.2 stars and Exhaust Pipe Flange Gasket with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1980 Chevrolet K30 below to get started!
Top-Rated Exhaust Parts Brands For Your 1980 Chevrolet K30
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Chevrolet K30 running right for years to come. In our inventory you’ll find brands like Felpro, Dorman, Flowmaster Inc., and even more.
Popular Hooker Headers Exhaust Parts
You’ll find popular Hooker Headers brand products across Exhaust System Kits. All are waiting to get your 1980 Chevrolet K30 back on the road. Some of the top-rated Hooker Headers products in these categories are:
Top-Rated Felpro Exhaust Parts
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Exhaust Parts for your 1980 Chevrolet K30, and some of our most reviewed Felpro parts include:
FAQs for 1980 Chevrolet K30 Exhaust Parts
What are the most purchased Exhaust Parts for the 1980 Chevrolet K30?
Out of 94 Exhaust Parts for the 1980 Chevrolet K30, the most popular in our inventory are:
from
$11.29
(10)
Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In.
Exhaust Hangers and Hardware
from
$99.99
(13)
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
Mufflers
What are the top-rated 1980 Chevrolet K30 Exhaust Parts?
Top-rated Exhaust Parts for your 1980 Chevrolet K30 based on customer reviews/ratings are:
from
$151.99
(5)
Direct Fit Exhaust Manifold: Without Heat Shield
“the manifold is at least 1/2 inch closer to the head and makes contact thats not seen.after installing i had an exhaust leak on the gasket because the”
