1980 Chevrolet El Camino Suspension Parts

Essential 1980 Chevrolet El Camino Suspension Parts

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

MOOG – Coil Spring Insulator (Part No.K160044)

Coil Spring Insulator

from

$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Controls Two Air Springs Individually, Switch Operated

from

$1217.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe Shock Absorber Air Hose Kit

from

$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Energy Suspension – Hyper-Flex System (Part No.3.18110R)

Hyper-Flex System

from

$338.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Rare Parts – Coil Springs (Part No.RP45445)

Coil Springs

from

$149.99
Coil Springs

MOOG – Control Arm Bumper (Part No.K6606)

Control Arm Bumper

from

$16.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

Monroe – Load Adjusting Shock Absorber (Part No.58270)

Load Adjusting Shock Absorber

from

$110.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Load Adjusting Shock Absorber (Part No.58574)

Load Adjusting Shock Absorber

from

$186.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Matic LT Shock Absorber (Part No.59301)

Gas-Matic LT Shock Absorber

from

$36.49
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5754)

OESpectrum Passenger Car Shock Absorber

from

$35.49
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Rare Parts – Control Arm Bush (Part No.RP22118)

Control Arm Bush

from

$15.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

TRW – Control Arm Bushing (Part No.L2040212883TRW)

Control Arm Bushing

from

$15.33
Control Arm Bushing

Dorman – Control Arm Shaft Kit (Part No.520-192)

Control Arm Shaft Kit

from

$38.99
This suspension control arm shaft kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment control arm shafts on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Control Arm Shaft Kit (Part No.RP15364)

Control Arm Shaft Kit

from

$163.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Complete kit for 1 arm
  • Heat treated steel bushings OR torsional rubber bushings
  • Reduces vibration
See More

Lakewood – Drag Shock-50/50:GM (Part No.40300)

Drag Shock-50/50:GM

from

$91.99
Drag Shock-50/50:GM

KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG5504)

High Pressure Monotube Gas Shock for Cars and Trucks

from

$79.99
Product Features:
  • Adds up to 25% more damping performance over original equipment shocks
  • Components and valving designed specifically for classic GM cars
  • High gas pressure design provides instant, extra control
  • Monotube design outperforms all other standard shock absorbers
  • Unique, air-free, hydraulic unit eliminates performance fade
See More

MOOG – Coil Spring Set (Part No.5379)

Coil Spring Set

from

$113.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Set (Part No.5610)

Coil Spring Set

from

$145.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Control Arm Bump Stop Set

from

$14.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA762)

Max-Air Air Shock Absorber

from

$113.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA789)

Max-Air Air Shock Absorber

from

$110.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA702)

Max-Air Air Shock Absorber

from

$157.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

1980 Chevrolet El Camino Suspension Parts

You count on your 1980 Chevrolet El Camino to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 64 Suspension Parts ranging in price from $5.29 to $1,217.99, you’re sure to find everything you need for your 1980 Chevrolet El Camino.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 13 different brands like Valvoline, Monroe, and Moog. 1980 Chevrolet El Camino Suspension Parts start as low as $5.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 507 extensive product reviews on 1980 Chevrolet El Camino Suspension Parts. Some of the top-rated Suspension Parts products we carry are Control Arm Bushing Kit with 5.0 stars and Max-Air Air Shock Absorber with 3.4 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1980 Chevrolet El Camino below to get started!

Top-Rated Suspension Parts Brands For Your 1980 Chevrolet El Camino

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Chevrolet El Camino running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.

Popular Lakewood Suspension Parts

You’ll find popular Lakewood brand products across Shocks and Struts. All are waiting to get your 1980 Chevrolet El Camino back on the road. Some of the top-rated Lakewood products in these categories are:
Drag Shock-70/30:GM (Rear)
from $104.99
(1)
Drag Shock-70/30:GM (Rear)
Rear Shock and Struts

FAQs for 1980 Chevrolet El Camino Suspension Parts

What are the most purchased Suspension Parts for the 1980 Chevrolet El Camino?

Out of 64 Suspension Parts for the 1980 Chevrolet El Camino, the most popular in our inventory are:
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from $14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
from $11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Gas-Matic LT Shock Absorber
from $36.49
(5)
Gas-Matic LT Shock Absorber
Front Shock and Struts

What are the top-rated 1980 Chevrolet El Camino Suspension Parts?

Top-rated Suspension Parts for your 1980 Chevrolet El Camino based on customer reviews/ratings are:
Control Arm Bushing Kit
from $37.99
(8)
Control Arm Bushing Kit
“just like factory replacement !”
Max-Air Air Shock Absorber
from $110.99
(8)
Max-Air Air Shock Absorber
“Use the code and got 25% off plus speed perks Was a great deal”
OESpectrum Passenger Car Shock Absorber
from $57.99
(7)
OESpectrum Passenger Car Shock Absorber
“Good price”