1980 Audi 4000 Brake Parts

Essential 1980 Audi 4000 Brake Parts

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15163)

Disc Brake Caliper Repair Kit

from

$9.49
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5711)

Vacuum Brake Booster: Without Master Cylinder

from

$168.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5720)

Vacuum Brake Booster: Without Master Cylinder

from

$174.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Wearever – BRK HOSE 1 EA TRUTQ (Part No.BHA38028)

BRK HOSE 1 EA TRUTQ

from

$21.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Carquest Wearever – Drum Brake Hardware Kit (Part No.17242A)

Drum Brake Hardware Kit

from

$18.99
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. Replacing your hardware saves you time and money down the road.

Product Features:
  • Manufactured to restrain high tolerances with quality materials
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Maintains safe movement and effective stopping performance
  • Helps deliver a quieter, more efficient braking system
  • This part matches Original Equipment (OE) quality specifications
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13119)

Disc Brake Hardware Kit

from

$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37576)

Drum Brake Wheel Cylinder

from

$19.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA96399)

Drum Brake Wheel Cylinder

from

$17.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Otto Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N100019445ZXC)

Coat-Z Sport Brake Disc (Rotor)

from

$93.78
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH141095)

Disc Brake Rotor Meets or Exceeds OE Design

from

$60.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-Directional finish decreases break-in time
See More

Carquest Wearever – Brake Rotor Meets or Exceeds OE Design (Part No.YH141248)

Brake Rotor Meets or Exceeds OE Design

from

$58.99
Carquest Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design And non-directional finish that eliminates noise And enhances pedal feel. Carquest Wearever Rotors are designed to dissipate heat helping to eliminate brake fade And increase the life of your pads. Ready to install out of the box to save you time.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

1980 Audi 4000 Brake Parts

You count on your 1980 Audi 4000 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 11 Brake Parts ranging in price from $6.95 to $355.29, you’re sure to find everything you need for your 1980 Audi 4000.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 5 different brands like Cardone, Carquest, and Autopart International Inc. 1980 Audi 4000 Brake Parts start as low as $6.95!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 39 extensive product reviews on 1980 Audi 4000 Brake Parts. Some of the top-rated Brake Parts products we carry are Disc Brake Rotor Meets or Exceeds OE Design with 3.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1980 Audi 4000 below to get started!

Top-Rated Brake Parts Brands For Your 1980 Audi 4000

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Audi 4000 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Autopart International Inc, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1980 Audi 4000 back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 1980 Audi 4000 Brake Parts

What are the most purchased Brake Parts for the 1980 Audi 4000?

Out of 11 Brake Parts for the 1980 Audi 4000, the most popular in our inventory are:
Drum Brake Wheel Cylinder
from $17.99
(2)
Drum Brake Wheel Cylinder
Brake Wheel Cylinders
Disc Brake Caliper Repair Kit
from $9.49
This product is not rated
Disc Brake Caliper Repair Kit
Brake Caliper Kits
BRK HOSE 1 EA TRUTQ
from $21.99
This product is not rated
BRK HOSE 1 EA TRUTQ
Brake Hoses

What are the top-rated 1980 Audi 4000 Brake Parts?

Top-rated Brake Parts for your 1980 Audi 4000 based on customer reviews/ratings are:
Disc Brake Rotor Meets or Exceeds OE Design
from $60.99
(1)
Disc Brake Rotor Meets or Exceeds OE Design
“My car is 26 years old and gets 48 mpg. I put 100 miles a day going to and from work. That being said, I want quality parts at a great value. These”