1980 Audi 4000 Oil and Lubricants
More 1980 Audi 4000 Oil and Lubricants Categories
If you’re looking for an original Oil and Lubricants replacement for a 1980 Audi 4000, you can search through our selection below. You’ll also find aftermarket and OEM Oil and Lubricants to meet your needs.
Essential 1980 Audi 4000 Oil and Lubricants
FRAM – High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F665-5QT)
from
$25.99
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Castrol – EDGE Extended Performance Full Synthetic 5W20 Motor Oil 1 Quart (Part No.15D529)
from
$13.49
Castrol® EDGE® Extended Performance is Castrol’s most advanced full synthetic motor oil. It provides ultimate performance and the strength to enable an extended drain of 20,000 miles or a full year (whichever comes first).
Product Features:
See More
Product Features:
- Approved and Licensed Specifications include: API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, ACEA C5, Ford WSS-M2C960-A1, Meets engine test performance of Chrysler MS-6395
- 10X Better High Temperature Performance (Seq IIIH test vs. API SP limit)
- 6X Better Wear Protection (Based on Seq IVA vs. latest test limit)
Castrol – Conventional 30W Engine Oil – Protects against thermal breakdown – 1 Qt (Part No.151B00)
from
$8.49
Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.
Product Features:
See More
Product Features:
- Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
- Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
- Engineered for greater protection against thermal breakdown
- Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
- Made in the usa
- Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.
Castrol – GTX 10W-30 Conventional Motor Oil: 5 Quart (Part No.15B7AA)
from
$29.99
Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.
Product Features:
See More
Product Features:
- Superior protection against engine sludge (When tested in engines with a high level of sludge)
- Advanced protection against viscosity and thermal breakdown
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)
from
$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart
Castrol – GTX Conventional 20W-50 Motor Oil: Helps Protect Against Sludge Build Up, 1 Quart (Part No.151A8E)
from
$9.99
Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.
Product Features:
See More
Product Features:
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge (when tested in engines with a high level of sludge)
- Helps minimize oil consumption
- Meets ILSAC GF-6 specs
Castrol – GTX High Mileage 5W-20 Synthetic Blend Engine Oil: 5 Quart (Part No.1597C4)
from
$30.99
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.
Product Features:
See More
Product Features:
- Phosphorus replacement technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
- Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
- Part synthetic oil: GTX High Mileage Engine Oil is a part synthetic oil that provides extra protection for older vehicles, making it an ideal choice for high mileage engines.
- Protects against sludge, wear and burn-off: This synthetic blend engine oil helps extend the life of your engine by protecting against sludge, wear and burn-off, ensuring that your engine runs smoothly for longer.
Castrol – GTX High Mileage Synthetic Blend 10W-30 Motor Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6C)
from
$10.49
Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
- Meets or exceeds API SP/SN PLUS/SN and ILSAC GF-6 specs
Castrol – EDGE High Mileage 5W-20 Advanced Full Synthetic Engine Oil: 5 Quart (Part No.15906D)
from
$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.
Product Features:
See More
Product Features:
- Patented phosphorus replacement technology to help extend the life of your emission system
- 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
- 6x better wear protection (as measured in latest sequence iva engine test)
- 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
- Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
- Improved High Temperature Performance: With Fluid TITANIUM Technology, this engine oil provides up to 10X better high temperature performance than the latest industry standard, ensuring optimal protection and oil flow over the drive cycle.
FRAM – Conventional 20W-50 Motor Oil: 1 Quart (Part No.F650)
from
$6.49
FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-Speed Pre-Ignition Control
- Chain Wear Protection
- Piston Cleanliness
- Turbo-Compatibility
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
FRAM – Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control – 1 Qt (Part No.F610)
from
$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
Castrol – EDGE High Mileage 10W-30 Full Synthetic Engine Oil 1 Quart (Part No.15979B)
from
$12.99
CASTROL EDGE High Mileage 10W-30 Full Synthetic Motor Oil 1 Quart is the perfect solution for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM 6094M standards and offers motor oils that meet OEM specifications. It is available in different grades, including 5W-20, 5W-30, and 10W-30. This motor oil is the natural choice for consumers who want to extend maximum engine performance and preserve the catalytic converter and the emission system. Try CASTROL EDGE High Mileage today and experience the difference in your vehicle’s performance.
Product Features:
See More
Product Features:
- 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
- 6x better wear protection – as measured in seq iva test vs. latest test limit
- From the makers of the No. 1 high mileage brand
- Meets api sp/sn plus, ilsac gf-6, gm 6094m
- Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
- Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
- Try castrol edge high mileage today
Castrol – EDGE® 10W-30 Full Synthetic Motor Oil 1 Quart (Part No.152E4E)
from
$11.99
Castrol EDGE with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive.
Product Features:
See More
Product Features:
- 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
- 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
- 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
- Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
FRAM – High Mileage 5W-20 Motor Oil: 5 Quart (Part No.F662-5QT)
from
$25.99
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Febi – 02582 grease (for input shaft) 90g (Part No.K600164873FEB)
from
$6.75
Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.
Product Features:
See More
Product Features:
- Original Febi spare parts
- Proven OE: Febi fulfills all eligibility requirements
- High driving comfort through the use of perfectly matched materials and impeccable design
Popular 1980 Audi 4000 Oil and Lubricants Categories
1980 Audi 4000 Oil and Lubricants
You count on your 1980 Audi 4000 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 54 Oil and Lubricants ranging in price from $5.87 to $41.99, you’re sure to find everything you need for your 1980 Audi 4000.
Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 4 different brands like FRAM, Castrol, and Febi. 1980 Audi 4000 Oil and Lubricants start as low as $5.87!
One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 6,345 extensive product reviews on 1980 Audi 4000 Oil and Lubricants. Some of the top-rated Oil and Lubricants products we carry are GTX 10W-30 Conventional Motor Oil: 5 Quart with 4.8 stars and GTX 10W-30 Conventional Motor Oil: 1 Quart with 4.8 stars.
Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 1980 Audi 4000 below to get started!
Top-Rated Oil and Lubricants Brands For Your 1980 Audi 4000
Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Audi 4000 running right for years to come. In our inventory you’ll find brands like FRAM, Castrol, Febi, and even more.
Popular Castrol Oil and Lubricants
You’ll find popular Castrol brand products across Motor Oil. All are waiting to get your 1980 Audi 4000 back on the road. Some of the top-rated Castrol products in these categories are:
Top-Rated Castrol Oil and Lubricants
If Castrol are what you’re looking for, our inventory holds plenty. We stock Castrol brand Oil and Lubricants for your 1980 Audi 4000, and some of our most reviewed Castrol parts include:
from
$10.49
(328)
GTX High Mileage Synthetic Blend 5W-20 Motor Oil: Helps Protect Emission Systems, 1 Quart
Engine Oil
from
$10.49
(240)
GTX High Mileage Synthetic Blend 10W-30 Motor Oil: Helps Protect Emission Systems, 1 Quart
Engine Oil
FAQs for 1980 Audi 4000 Oil and Lubricants
What are the most purchased Oil and Lubricants for the 1980 Audi 4000?
Out of 54 Oil and Lubricants for the 1980 Audi 4000, the most popular in our inventory are:
from
$38.99
This product is not rated
EDGE High Mileage 5W-20 Advanced Full Synthetic Engine Oil: 5 Quart
Engine Oil
What are the top-rated 1980 Audi 4000 Oil and Lubricants?
Top-rated Oil and Lubricants for your 1980 Audi 4000 based on customer reviews/ratings are:
