1979 Volvo 265 Drivetrains

Essential 1979 Volvo 265 Drivetrains

USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)

Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft

from

$639.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008

Product Features:
  • Fits Dana Spicer 30 with 27 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

FAG – Drive Shaft Support Bearing (Part No.K1040390203FAG)

Drive Shaft Support Bearing

from

$40.95
FAG drive shaft support bearings are built to meet or exceed OE specifications. FAG Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Pre-Lubricated and reinforced seals
See More

Yukon Gear – Seal Housing For Dana 30, Model 35 Zip Locker (Part No.34012)

Seal Housing For Dana 30, Model 35 Zip Locker

from

$78.99
Product Features:
  • Seal housing for Dana Spicer 30 and AMC Model 35
  • Includes o-rings
See More

Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)

1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet)

from

$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1330 u-joint size
  • Includes two u-bolts and four nuts
See More

Rare Parts – Differential Support Bushing (Part No.RP17341)

Differential Support Bushing

from

$121.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • UV resistant
  • Natural rubber
  • No Squeak
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-542)

Differential Pinion Yoke Assembly

from

$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

Product Features:
  • Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
  • Effective fix – replacement restores proper connection between drive shaft and differential
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Carrier Installation Kit For Dana 30 Differential (Part No.57002)

Carrier Installation Kit For Dana 30 Differential

from

$99.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 30 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 30
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Replacement Cover Gasket For Dana 30

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 30
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)

Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size

from

$121.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

National – Bearings (Part No.201-CC)

Bearings

from

$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)

Dana 28 & Dana 30 Pinion Gear Thrust Washer

from

$7.99
Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 25, 27 and 30
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R30FRMK)

Differential Master Bearing Kit - Koyo

from

$99.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • D30F MASTER BEARING SEAL & GASKET S 66-90
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41020)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$125.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44
  • 26 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.125″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

GKN Drivetech – Universal Joint (Part No.K1010390141GKN)

Universal Joint

from

$19.81
GKN Driveline offers an entire portfolio of prop shaft solutions for passenger cars and light commercial vehicles.

Product Features:
  • Cast with solid materials, and coated for protectional against corrosion
  • Stress tested to endure long operational periods
  • Part number is specific to the vehicle’s year, make and model
See More

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Taper Bearing Cup

from

$7.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Steel Cover For Dana 30 Standard Rotation Front (Part No.32316)

Steel Cover For Dana 30 Standard Rotation Front

from

$138.99
Product Features:
  • Fits standard rotation Dana Spicer 30
  • Steel
See More

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24

from

$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:
  • Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
  • 3/8″ x 24 thread
See More

Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)

1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts

from

$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

Product Features:
  • u-joint strap kit
  • Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
  • 1310 and 1330 u-joint size
  • Includes two straps and four bolts
See More

Professional Parts Sweden – Driveshaft Support Spring (Part No.K1053390161PPS)

Driveshaft Support Spring

from

$2.74
The Professional Parts Sweden Driveshaft Support Spring is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

SKF – Pinion Seal, Red (Part No.J701050573SKF)

Pinion Seal, Red

from

$16.92
Pinion Seal, Red

Yukon Gear – Grizzly Locker, Dana 30, 30 Spline, 3.73 & Up (Part No.28029)

Grizzly Locker, Dana 30, 30 Spline, 3.73 & Up

from

$941.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits Dana Spicer 30 with 30 spline axles
  • 3.73 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

USA Standard Gear – Ring/Pinion Sets (Part No.36347)

Ring/Pinion Sets

from

$324.99
Ring/Pinion Sets

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

Popular 1979 Volvo 265 Drivetrains Categories

1979 Volvo 265 Drivetrains

You count on your 1979 Volvo 265 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 127 Drivetrains ranging in price from $1.63 to $1,303.99, you’re sure to find everything you need for your 1979 Volvo 265.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 1979 Volvo 265 Drivetrains start as low as $1.63!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 717 extensive product reviews on 1979 Volvo 265 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1979 Volvo 265 below to get started!

Top-Rated Drivetrains Brands For Your 1979 Volvo 265

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Volvo 265 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Spicer Drivetrains

You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1979 Volvo 265 back on the road. Some of the top-rated Spicer products in these categories are:
Universal Joint
from $35.99
(2)
Universal Joint
U-Joints
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints

FAQs for 1979 Volvo 265 Drivetrains

What are the most purchased Drivetrains for the 1979 Volvo 265?

Out of 127 Drivetrains for the 1979 Volvo 265, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 1979 Volvo 265 Drivetrains?

Top-rated Drivetrains for your 1979 Volvo 265 based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Non-Greaseable Super Strength Universal Joint
from $32.99
(28)
Non-Greaseable Super Strength Universal Joint
“installed as needed”
Bearings
from $16.99
(25)
Bearings
“Fit like it should no issues”