1979 Pontiac Sunbird Performance and Racing Products

Name: PUSHROD SET, SBC 3/8 1 ST
Brand: Competition Cams
SKU: 7513-16
Price: 165.99 USD

Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1979 Sunbird. Advance Auto Parts has popular Sunbird parts like Performance Ignition Products, Performance Oil Filters, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Sunbird model years including 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and more. Select a category of 1979 Pontiac Sunbird Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1979 Pontiac Sunbird Performance and Racing Products Categories

Performance Oil Filters

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Fuel Pumps

Performance Coils

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Distributors

Performance Transmission Dipstick Tubes

Performance Valve Covers

Performance Engine Dress-Up Kits

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Ignition Modules

Performance Front Shock and Struts

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Timing Covers and Tabs

Performance Valve Cover Hardware

Performance Engine Rocker Arms

Performance Exhaust Header Hardware

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Pulleys

Performance Engine Valve Lifters

Performance Engine Main Bearing Gasket Sets

Performance Transmission Shift Kits

Performance Engine Push Rod Guideplates

Performance Engine Camshaft Thrust Buttons

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Ignition Systems

Performance Engine Valve Stem Seal Sets

Performance Flywheels

Performance Fuel Pump Pushrods

Essential Performance and Racing Products for 1979 Pontiac Sunbirds

from

$165.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$77.99

This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

Product Features:

Fits Most Stock And Modified Distributors
Solid State Electronics
Dwell Control Circuit

from

$255.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$38.99

Fuel Pump Pushrod with Bronze Tip for Oldsmobile Rocket

from

$37.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longevity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.
Not intended for use in emission controlled vehicles.

from

$499.99

The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:

Universal Floor Mount Application
Base Trimmed For Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$126.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$99.99

Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:

Durable Polyurethane
Absorbs Vibration
Last Longer Than Rubber
Built-In Safety Lock

from

$57.99

Spectre’s high quality crankshaft, alternator and engine pulley sets are designed to help dress up your engine compartment. All of our pulleys are designed to work in OE applications and with the OE style serpentine or v-belt configuration.

Product Features:

Machined aluminum finish
Single belt groove
6-9/16 In. diameter-note: identify the water pump by looking at the distance between it and the timing cover, long water pumps are about 1 In. away from the timing cover
Easy to install

from

$288.99

HYDRAULIC – Magnum: Pro Street/bracket, limited street driving. Intake, gears, 3500+ stall. Racy idle. 10.5:1 compression. OR Drag Race: 3500-4000 stall or 4 speed with 11:1+ compression.

Product Features:

HYDRAULIC – Magnum: Pro Street/bracket, limited street driving. Intake, gears, 3500+ stall. Racy idle. 10.5:1 compression. OR Drag Race: 3500-4000 stall or 4 speed with 11:1+ compression.
305/305 Advertised Duration, 253/253 Duration @ .050″, .525″/.525″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$47.49

ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:

Features Protection From Arc Thru And Crossfire
Features 60k V Rated Alkyd Compound
Brass Terminals Inserts And Steel Rotor Springs
High Spark Energy Flow

from

$10.99

10 Degree Steel Retainer for 26120 Beehive Spring

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

from

$10.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

from

$122.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

from

$77.99

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve.

Product Features:

Silicone boots protect against high exhaust temps
Kevlar core combination for great strength and durability
Heavy duty terminals for secure connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone boots protect against high exhaust temps

from

$509.99

Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:

Based on C26 Low Profile with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
1.625 in. Taller Than Low-Profile PN[5425]
Also Available In EnduraShine Finish PN[75254]
Also Available As Complete Kit PN[2025/20254]
Best When Matched with Edelbrock 500cfm Carburetor
Use Fuel Line Kit PN[8088/8091]
Use Progressive Throttle Linkage Kit PN[7094]

from

$42.99

This Spectre Alternator Bracket Kit was designed for 1969-1986 Chevrolet Small Block engines with a long water pump. This triple chrome-plated kit includes two brackets and the hardware needed to mount your alternator in a clean and professional way.

Product Features:

Designed for ’69-’86 Chevrolet Small Block engines with long water pump
Kit includes two brackets and mounting hardware
Triple chrome plated
Manufactured with high quality materials

from

$51.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Anti-Stick Properties
Easy Removal For Disassembly

from

$159.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$511.99

A factory-style ignition module is supplied with the distributor so your factory wiring will plug directly in. Triggering this module is the responsibility of a high output magnetic pick-up. Topping it all off is a heavy-duty rotor and a red MSD cap with brass terminals to ensure full spark delivery. For late model engine swaps or bolt-on strength, this distributor is the answer.

Product Features:

Drop-in billet replacement for GM distributors with the small cap and external coil
Factory style ignition module accepts factory wiring
CNC machined billet aluminum housing and billet aluminum base
Magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
áMagnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
Oversized steel shaft is QPQ coated and guided by a sealed ball bearing and an extra long sintered bushing
áOversized steel shaft is QPQ coated and guided by a sealed ball bearing and an extra long sintered bushing
Special oil tract improves lubrication to the distributor and cam gear
O-ring seals can be added to modified blocks to improve oil pressure control
Supplied with late model distributor cap and rotor
Legal to install in all 50 states
Marine UL Certified

from

$521.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$76.99

The Edelbrock #4649 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Chevy 262-400 1959-86
Tall
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$15.99

Roller cam lobes are ground flat rather than tapered like a flat tappet cam; it is necessary to provide some means of holding the cam back to the rear of the engine. The thrust button rides between the front of the timing gear and the back of the front cover and can be shimmed for proper end play of the cam. COMP Cams has both the solid nylon button and the roller thrust bearing available for the ultimate in performance.

Product Features:

.810″ Length
Ride between the front of the timing gear and the back of the timing cover
Can be shimmed to achieve proper endplay
Solid nylon and roller thrust bearing styles available

from

$26.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$173.99

Heavy Duty Flexplate fits: Chevrolet – ’55-’85 SB V8 And 90 deg. V6 with 168 tooth ring gear And 10-3/4 in. or 11-1/2 in b.c. exc. 400Chevrolet – ’90 And earlier Chevrolet BB V8 with 168 tooth ring gear And 10-3/4 in or 11-1/2 in b.c. exc. 454

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

Upgrade your 1979 Pontiac Sunbird with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1979 Pontiac Sunbird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Sunbird functioning at its best. At Advance Auto Parts, we offer a wide selection of 255 Performance and Racing Products for the 1979 Pontiac Sunbird, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1979 Pontiac Sunbird at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.99 to $1,201.99, with an average price of $272.86. Our 255 Performance and Racing Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 1979 Pontiac Sunbird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 Pontiac Sunbird, we stock popular OEM and aftermarket Performance and Racing Products from top names like Edelbrock, B & M, Competition Cams, and more. Edelbrock Performance and Racing Products start at just $59.99 and boast an impressive 4.4 stars average rating from customers. B & M and Competition Cams also bring quality to the table, with Performance and Racing Products available starting at $83.99, and at an average 4.3 stars rating. With 628 customer reviews and counting, our 1979 Pontiac Sunbird Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1979 Pontiac Sunbird is always ready to roll. We’re committed to providing you with everything you need to keep your Sunbird in top shape, all in one place. Start shopping confidently below for your 1979 Pontiac Sunbird!

Best-Selling Performance Ignition Products for 1979 Pontiac Sunbirds

Enhance the driving experience in your Pontiac with 11 quality Performance Ignition Product components, starting at $34.49.

show more show less

from

$102.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Dr-31
MSD 8225

from

$95.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$64.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$126.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$143.99

The MSD 8.5mm Super Conductor is the ultimate performance wire. Its extremely low-resistance combined with the ability to suppress Electro Magnetic Interference is a combination that defies the common laws of physics.

Product Features:

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
Forty feet of conductor is wound into a single foot of wire for high EMI suppression
Conductor core features Dupont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Proprietary compound sleeves for resistance to high heat/abrasion

from

$77.99

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve.

Product Features:

Silicone boots protect against high exhaust temps
Kevlar core combination for great strength and durability
Heavy duty terminals for secure connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone boots protect against high exhaust temps

from

$77.99

Fits Most Stock And Modified Distributors
Solid State Electronics
Dwell Control Circuit

from

$34.49

3-wire for ignition box.

Product Features:

Service Part
Makes Connections Quick And Easy

from

$499.99

The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This “flying magnet” design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered. Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustments. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .25″ motor plate. These systems will trigger MSD 6, 7, and 8 Series Ignitions and all MSD Timing Accessories.

Product Features:

7″ Diameter
Absolutely the most accurate way to trigger the ignition.
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Kits feature special brackets and mounting hardware for a variety of engines.

from

$204.99

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

Product Features:

Classic good looks
High current / voltage output
Spark plug style terminal for excellent coil wire retention
Brass contact terminals
Mounting bracket included
Can be used on inductive and CD ignitions

from

$70.99

Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:

Externally mounted coil
Increases reliability
Increase performance
High quality plastic
Resist spark loss
Use brass conductors
Low resistance connections
No modifications

Top Picks for 1979 Pontiac Sunbird Performance Fuel Systems

Upgrade Pontiac Sunbirds with top-quality Performance Fuel Systems parts, including 4 OEM and aftermarket selections for your 1979 model.

show more show less

from

$13.99

This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.

Product Features:

Small block Chevrolet, use for mounting mechanical fuel pumps
Includes mounting plate gasket
Includes chrome mounting bolts with washers
Triple chrome plated

from

$165.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

High Output Fuel Flow
Flows 110 gph Free Flow
Shutoff Pressure Pre-Set From 6.5 To 8 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT
Inlet/Outlet Tapped For 3/8 in. NPT

from

$18.79

Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features:

Chrome Plated Steel
Comes With Gasket

from

$38.99

Fuel Pump Pushrod with Bronze Tip for Oldsmobile Rocket

In-Demand Performance Engines for 1979 Pontiac Sunbirds

Select from 193 premium Performance Engines parts for your 1979 Pontiac Sunbird, with prices ranging from $7.99 to $1,201.99.

show more show less

from

$195.99

Edelbrock part No. 2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No. 2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. PLEASE NOTE: Will not fit under stock Corvette hood!

Product Features:

Maximizes Performance with Edelbrock Carburetors
Runners Tuned to Match Square Bore Carburetor
Maximizes Peak Torque Around 3500 RPM
Excellent Throttle Response and Mid-Range Power
For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
PLEASE NOTE: Will not fit under stock Corvette hood!

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$31.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$279.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Accepts Late-Model Choke; Waterneck; and HEI
Accepts A/C And Alternator
Accepts Exhaust Heated Chokes

from

$223.99

VALVE SEALS, O-RING 11/32″ 1 ST

from

$64.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$217.99

These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

Product Features:

Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
For applications with less than 350 lbs. of open spring pressure
Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
Ultimate street roller rocker arm designed for serious performance enthusiasts

from

$83.99

COMP Cams Hi-Tech Roller Race Timing Sets include cast iron camshafts gears, induction hardened billet steel crank sprockets, and pre-stretched, heat-treated double roller chains with heavy-duty large pin design. They feature 3 keyway crank sprockets for

Product Features:

Cast iron camshaft gear and induction hardened billet steel crank sprocket
Pre-stretched, heat-treated true double roller chain with heavy-duty large pin design; chain available separately
Ideal for all street performance and race applications
Features 3 keyway crank sprocket for 4-degree incremental adjustability, 4-degree maximum advance/retard
Dynamically balanced and quality checked for run-out tolerances

from

$159.99

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$66.99

COMP Cams High Energy Timing Chain Sets include precision cast iron camshaft and crank gear sprockets and premium quality link belt type timing chain. These sets exceed all original equipment timing chain specifications and are ideal for stock replacement and mild performance applications.

Product Features:

Exceeds all original equipment timing chain specifications
Premium quality link belt type chain for exceptional durability; chain also available separately
Precision cast iron camshaft and crank gear sprockets
Ideal for stock replacement and mild performance applications

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$562.99

Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$433.99

The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series Al

Product Features:

Precision-sorted trunnion bearings withstand valve spring pressure up to 700 lbs.
CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
Increase engine power, enhance valve train stability and improve oiling
Designed for high performance street and race engines
Arced channel & contoured top give the rockers the best strength to weight ratio possible

from

$382.99

Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$126.99

Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:

For Chevrolet small block 265 and 400
Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
Designed for use with OE specifications for fit and function
Made from high quality material

from

$29.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$29.99

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$28.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$255.99

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$255.99

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$10.99

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

from

$32.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$26.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

Most Sold 1979 Pontiac Sunbird Performance Exhaust Products

Explore our best-selling Pontiac parts for the 1979 Sunbird among 8 OEM and aftermarket options starting from $20.49.

show more show less

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$42.99

Designed for ’69-’86 Chevrolet Small Block engines with long water pump
Kit includes two brackets and mounting hardware
Triple chrome plated
Manufactured with high quality materials

from

$43.49

Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:

Bright Ball Burnish Finish
Made From 304 Stainless
Compact Hex Head Is Ideal Where Space Is Limited
12 Per Set
Resist corrosion and provides a clean professional appearance

from

$26.99

A high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber blended sheets that are mechanically and chemically fused to an expanded steel core. The finished product provides high heat resistance, excellent load retention and unmatched sealing performance on exhaust manifold and header applications. A 50% recovery rate allows for gasket expansion in the event your header loses the proper header bolt torque. Gasket futures a 1.50″x 1.50″ port size.

Product Features:

Designed To Match Port Openings Of Cylinder Heads
Excellent Free-Flowing Seal

from

$20.49

Gaskets

from

$95.99

gasket will not because the “Dead Soft” aluminum conforms to create a leak-proof seal. REAL-SEALS can also be easily trimmed for port-matching and

Product Features:

Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof seal
Water/Weather Resistant
Re-Useable
Will Not Burn Or Blow Out
Suitable For Port-Matching
Made In USA

from

$51.99

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Anti-Stick Properties
Easy Removal For Disassembly

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Top-Rated Performance and Racing Products Brands For Your 1979 Pontiac Sunbird

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1979 Pontiac Sunbirds. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, B & M, and Competition Cams, and more. Performance and Racing Products from these brands that fit a 1979 Sunbird start at just $59.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Edelbrock 1979 Pontiac Sunbird Performance and Racing Products

When it comes to maintaining or upgrading your 1979 Pontiac Sunbird, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1979 Pontiac Sunbird. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $59.99, with an average price of just $178.66. Plus, with over 14 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $195.99

(7)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

“Great product and great price”

from $279.99

(3)

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

“Get the matching carb, increased HP by 50 points”

from $59.99

(4)

Signature Series Valve Covers, Black, Low Profile, Chevrolet 262-400, ’59-’86

“Changed the look of my engine amd fit nice with no leaks.”

Popular B & M 1979 Pontiac Sunbird Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1979 Pontiac Sunbird owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1979 Sunbird, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these B & M Performance and Racing Products range from $382.99 to $562.99, plus, with more than 3 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $562.99

(1)

Tork Master 3000

“good parts and very strong”

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $382.99

(1)

Tork Master 2400

“The B&M 2400 stall converter was a great choice for my application. It works well on the street and track, increased performance by leaps and bounds. ”

FAQs for 1979 Pontiac Sunbird Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1979 Pontiac Sunbirds?

Out of 255 Performance and Racing Products that fit 1979 Pontiac Sunbirds, the following parts are the top sellers:

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120010) – $17.99
High Performance 180 Degree Thermostat for Increased Flow (17360033) – $29.99
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (17340006) – $195.99

What’s the price range for 1979 Pontiac Sunbird Performance and Racing Products?

Performance and Racing Product prices for the 1979 Pontiac Sunbird start at $7.99 and go up to $1,201.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1979 Pontiac Sunbird?

The average price for Performance and Racing Products for the 1979 Pontiac Sunbird is $272.86. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Sunbird model years?

Yes, we currently carry Performance and Racing Products for 13 model years of Pontiac Sunbirds between 1976 and 1994. Performance and Racing Products are bought most frequently for the following model years: 1994, 1993, 1992, 1991, 1990, 1989, 1988, 1987, and 1986.

What are the cheapest Performance and Racing Products for my 1979 Pontiac Sunbird?

The cheapest 1979 Pontiac Sunbird Performance and Racing Products we carry in stock are:

High Energy 7.794" Long, 5/16" Diameter Pushrod (50289688) – $7.99
High Energy 9.677" Long, 5/16" Diameter Pushrod (50289705) – $8.99
Valve Cover Clamps SB (22905476) – $9.99
Engine Valve Spring (50286657) – $9.99
Bolt Kit Intake Hex Head (22905656) – $10.99

What are the top-rated Performance and Racing Products that fit the 1979 Pontiac Sunbird?

Out of 628 reviews by customers, our 1979 Pontiac Sunbird Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1979 Pontiac Sunbird and their top-rated products:

Performance Shifters
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
Performance Oil Filters
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99

What types of Performance and Racing Products do you sell for my 1979 Pontiac Sunbird?

As of 6/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1979 Pontiac Sunbird:

Can I get help with 1979 Pontiac Sunbird Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac Sunbird Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac Sunbird Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1979 Pontiac Sunbird Performance and Racing Products

Competition Cams – PUSHROD SET, SBC 3/8 1 ST (Part No.7513-16)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

Accel – High Performance Ignition Module For Gm Hei Distributors (Part No.35361)

Weiand – Action Plus Water Pumps (Part No.9240P)

Competition Cams – Fuel Pump Pushrod with Bronze Tip for Oldsmobile Rocket (Part No.4620)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2912)

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Accel – Gm HEI Supercoil Red/White (Part No.140005)

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Spectre – Pulley Mch Alum Sb Che (Part No.4409)

Competition Cams – Magnum/Drag Race 253/253 Hydraulic Flat Cam (Part No.12-214-4)

Accel – HEI Distributor Cap & Rotor Kit with Arc-Thru Protection (Part No.8122)

Competition Cams – 10 Degree Steel Retainer for 26120 Beehive Spring (Part No.795-1)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2002)

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Lakewood – Drag Shock-70/30:GM (Part No.40120)

MSD Ignition – Wire Set – Universal Street Fire, 8-Cylinder, HEI/90 Degree (Part No.5552)

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)

Spectre – Alternator Bracket Kit 69-86 Chevy (Part No.47293)

Mr. Gasket – Ultra-Seal Exhaust Gaskets – Hi-Temp Graphite – Small Block Chevy Oval Port – 1.50"W X 1.82"H (Part No.5917)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

MSD Ignition – Distributor, Late-Model GM HEI V8, External Coil (Part No.8366)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam K-Kit (Part No.K12-234-2)

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel (Part No.4649)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Competition Cams – Cam Button, Chevy Small Block & 90 Degree V6 Polymer Material (Part No.202)

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1803)

B & M – Flexplate for 168 tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

Accel – High Energy Ignition Coil For Gm Hei – 1973-1991 (Part No.140003)

Mallory – Unilite Ignition Module (Part No.605)

Accel – 8Mm Super Stock Graphite Cust (Part No.4048)

Accel – Gm HEI Supercoil Red/White (Part No.140005)

MSD Ignition – Wire Set – Super Conductor, Small-Block Chevy with HEI Cap (Part No.35599)

MSD Ignition – Wire Set – Universal Street Fire, 8-Cylinder, HEI/90 Degree (Part No.5552)

Accel – High Performance Ignition Module For Gm Hei Distributors (Part No.35361)

Mallory – Distributor Wiring Harness (Part No.29349)

MSD Ignition – Crank Trigger Kit, Small Block Chevy (Part No.8610)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2002)

Spectre – Sbc Fuel Mounting Plate With Bolts (Part No.42493)

Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)

Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

Competition Cams – Fuel Pump Pushrod with Bronze Tip for Oldsmobile Rocket (Part No.4620)

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)

Competition Cams – Valve Seals, O-Ring 11/32" 1 St (Part No.501-16)

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)

Competition Cams – TIMING SET, HIGH TECH SMALL BLOCK CHEVY 1 EA (Part No.3100)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Competition Cams – High Energy Timing Set (Part No.3200)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

B & M – Tork Master 3000 (Part No.20402)

Competition Cams – ALUMINUM GOLD ROCKER ARMS, SBC 1 ST (Part No.19001-16)

B & M – Tork Master 2400 (Part No.20404)

Spectre – W3 Engine Kit Sb Chevy (Part No.54083)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.7201)

Weiand – Action Plus Water Pumps (Part No.9240P)

Weiand – Action Plus Water Pumps (Part No.9208P)

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Mr. Gasket – High Performance Thermostat (Part No.4365)

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1803)

FEL-PRO Performance – Perforated Steel Core with Anti-Stick Coating Exhaust Manifold Gasket Set (Part No.1444)

Spectre – Alternator Bracket Kit 69-86 Chevy (Part No.47293)

Mr. Gasket – Header Bolt Set (Part No.2210G)

Edelbrock – Exhaust Manifold Gasket Set for 1958-86 Small Block Chevrolet (Part No.7204)

Flowtech – Gaskets (Part No.99161FLT)

Flowtech – Header Gaskets – Aluminum-Layered (Part No.99150FLT)

Mr. Gasket – Ultra-Seal Exhaust Gaskets – Hi-Temp Graphite – Small Block Chevy Oval Port – 1.50"W X 1.82"H (Part No.5917)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)