1979 Lincoln Mark V Performance and Racing Products
Find Your Specific 1979 Lincoln Mark V Performance and Racing Products
Below you will find various in-demand Lincoln Performance and Racing Products, components and accessories for your 1979 Mark V. Advance Auto Parts has popular Mark V parts like Performance Engines, Performance Exhaust Products, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mark V model years including
1977
1978 and more. Select a category of 1979 Lincoln Mark V Performance and Racing Products below and start saving instantly.
Popular 1979 Lincoln Mark V Performance and Racing Products Categories
Essential Performance and Racing Products for 1979 Lincoln Mark Vs
Accel – Distributor Cap And Rotor Kit (Part No.8224)
MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)
from
$599.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered.
- Powerful magnets are embedded in a billet aluminum trigger wheel.
- Incl. brackets/mounting hardware to fit a variety of engines
B & M – Automatic Shifter, Z-Gate (Part No.80681)
from
$299.99
Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.
Product Features:
See More
Product Features:
- Base Trims To Custom Fit Floor
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Black T-Handle and Cable
Mallory – Distributor Wiring Harness (Part No.29349)
MSD Ignition – Distributor; Ford 351C-460; Ready-to-Run with Steel Gear (Part No.83501)
from
$825.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Equipped w/Steel Gear
- Simple And Clean Installation w/Only Three Wires To Connect
Edelbrock – Water Pump for Ford 429/460 V8 in Satin Finish (Part No.8866)
from
$382.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.
Product Features:
See More
Product Features:
- Maximum Cooling for Street and Racing Engines
- Internal Passages Are Balanced for Maximum Flow
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution to Both Sides of Block
- Only Flows in One-Direction for Optimum Efficiency
Weiand – Hi-Ram; Intake Manifold (Part No.1993)
from
$731.99Product Features:
- Square Flange Carburetor Mounting
- Special D-Shaped Port Runner Design
- Large Plenum Chamber
Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5871)
from
$49.99
Ultra-Seal is Mr. Gasket’s premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For OE replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187″ thick.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
- Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
- For OE replacement, high performance street, drag race and oval track
- .187″ thick
- Handles Ex Flange Pressure
- Forms Leak Proof Seal
- Black Latex Coating
B & M – Holeshot 2400 (Part No.40412)
from
$823.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Edelbrock – Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions (Part No.7265)
from
$30.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7365)
from
$196.99
Product Features:
See More
- Head: 4.500″ Bore/0.048″ Thick/12.5cc Vol.
- Intake: 1.98″x2.26″ Port/.060″ Thick
- Exhaust: 1.50″x2.10″ Port
- 5/16″ Valve Cover
- Multi Piece Configuration
B & M – Shift Improver Kit, 67-91 C6 Transmission (Part No.40262)
from
$77.99
The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Edelbrock – Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2 (Part No.4461)
from
$88.99
The Edelbrock #4461 Signature Series Valve Covers are designed for Ford 351M-400 and 351C V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.
Product Features:
See More
Product Features:
- Ford 351M-400 & 351C V8
- Short
- Chrome Steel
- Set Of Two
- Rubber Grommets For Breather
Edelbrock – Pushrod Set for Ford 351M/400 (Part No.9633)
from
$198.99
Product Features:
See More
- 9.5 in. Length
- 0.312 in. Diameter
- 4130 Chromoly Steel Material
- Black Oxide Finish
- Made In The USA
Mallory – Distributor Drive Gear (Part No.29420)
from
$79.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
Edelbrock – Performer-Plus camshaft for Ford 351M-400 V-8 (Part No.2172)
from
$363.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Hays – Flexplt: Bb Ford 70-97 (164T) (Part No.12-055)
from
$212.99
Flexplt: Bb Ford 70-97 (164T)
Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Roller Cam (Part No.34-602-9)
from
$531.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.34-229-4)
from
$298.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.502-16)
from
$230.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with stock guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)
from
$65.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Rotor phasing can be adjusted.
- Ideal When Atomic TBI Is Controlling The Timing
Upgrade your 1979 Lincoln Mark V with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1979 Lincoln Mark V, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Performance and Racing Products are key to keeping your Mark V functioning at its best. At Advance Auto Parts, we offer a wide selection of 90 Performance and Racing Products for the 1979 Lincoln Mark V, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1979 Lincoln Mark V at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.99 to $823.99, with
an average price of $203.48.
Our 90 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1979 Lincoln Mark V without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 Lincoln Mark V, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, Edelbrock, B & M, and more.
Mallory Performance and Racing Products
start at just $92.99 and boast an impressive 4.9 stars average rating from customers.
Edelbrock and B & M also bring quality to the table, with Performance and Racing Products available starting at $30.99, and at an average 4.4 stars rating.
With 76 customer reviews and counting, our 1979 Lincoln Mark V Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1979 Lincoln Mark V is always ready to roll. We’re committed to providing you with everything you need to keep your Mark V in top shape, all in one place.
Start shopping confidently below for your 1979 Lincoln Mark V!
Best-Selling Performance Engines for 1979 Lincoln Mark Vs
Enhance the driving experience in your Lincoln with 66 quality Performance Engine components, starting at $7.99.
Edelbrock – Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions (Part No.7265)
from
$30.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Weiand – Action +Plus; Intake Manifold (Part No.8010)
from
$377.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.
Product Features:
See More
Product Features:
- Low Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)
from
$30.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 7 Piece Set (Part No.1240)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 1970-82; w/2 Bbl. Cylinder heads
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Competition Cams – Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.502-16)
from
$230.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with stock guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5871)
from
$49.99
Ultra-Seal is Mr. Gasket’s premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For OE replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187″ thick.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
- Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
- For OE replacement, high performance street, drag race and oval track
- .187″ thick
- Handles Ex Flange Pressure
- Forms Leak Proof Seal
- Black Latex Coating
Edelbrock – Performer 400 Intake Manifold for 1971-82 Ford 351/M400 (Part No.2171)
from
$443.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Mr. Gasket – Valve Cover Gasket Set (Part No.274)
from
$40.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Edelbrock – Performer-Plus camshaft for Ford 351M-400 V-8 (Part No.2172)
from
$363.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
B & M – Holeshot 2400 (Part No.40412)
from
$823.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – 10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring (Part No.795-100)
from
$635.99
10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring
Competition Cams – 7 Degree Steel Retainer Set 100 for 3/8" Valves with 1.500"-1.550" Spring (Part No.780-100)
from
$635.99
7 Degree Steel Retainer Set 100 for 3/8" Valves with 1.500"-1.550" Spring
Competition Cams – 10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring (Part No.749-100)
from
$601.99
10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam (Part No.32-601-8)
from
$549.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Magnum 262/262 Solid Roller Cam for Ford 351C, 351M-400M (Part No.32-772-9)
from
$505.99
Magnum 262/262 Solid Roller Cam for Ford 351C, 351M-400M
Edelbrock – Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Polished Finish (Part No.8849)
from
$473.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.
Product Features:
See More
Product Features:
- Maximum Cooling for Street and Racing Engines
- Internal Passages Are Balanced for Maximum Flow
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution to Both Sides of Block
- Only Flows in One-Direction for Optimum Efficiency
Competition Cams – Magnum 236/236 Solid Flat Cam for 351C, 351M-400M (Part No.32-238-4)
from
$426.99
Magnum 236/236 Solid Flat Cam for 351C, 351M-400M
Competition Cams – 7 Degree Steel Retainer Set of 100 for 11/32" Valve with 1.437"-1.500" Spring (Part No.743-100)
from
$408.99
7 Degree Steel Retainer Set of 100 for 11/32" Valve with 1.437"-1.500" Spring
Competition Cams – Magnum 224/224 Solid Flat Cam for 351C, 351M-400M (Part No.32-237-4)
from
$385.99
Magnum 224/224 Solid Flat Cam for 351C, 351M-400M
Competition Cams – Magnum 260/260 Solid Flat Cam for 351C, 351M-400M (Part No.32-240-4)
from
$379.99
Magnum 260/260 Solid Flat Cam for 351C, 351M-400M
Competition Cams – Magnum 248/248 Solid Flat Cam for 351C, 351M-400M (Part No.32-239-4)
from
$379.99
Magnum 248/248 Solid Flat Cam for 351C, 351M-400M
Competition Cams – Mutha’ Thumpr 234/249 Hydraulic Flat Cam (Part No.32-601-5)
from
$341.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.32-600-5)
from
$341.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.32-221-3)
from
$324.99
HYDRAULIC – High Energy: Everyday performance driving with stock converter.
Product Features:
See More
Product Features:
- HYDRAULIC – High Energy: Everyday performance driving with stock converter, noticeable idle
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .494″/.494″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Most Popular 1979 Lincoln Mark V Performance Exhaust Products
Customize your Lincoln with 1 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets, all
priced under $28.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Top Picks for 1979 Lincoln Mark V Performance Ignition Products
Upgrade Lincoln Mark Vs with top-quality Performance Ignition Products parts, including 6 OEM and aftermarket selections for your 1979 model.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Distributor Wiring Harness (Part No.29349)
MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)
from
$599.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered.
- Powerful magnets are embedded in a billet aluminum trigger wheel.
- Incl. brackets/mounting hardware to fit a variety of engines
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
In-Demand Performance Valve Covers for 1979 Lincoln Mark Vs
Select from 1 premium Performance Valve Covers parts for your 1979 Lincoln Mark V.
Edelbrock – Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2 (Part No.4461)
from
$88.99
The Edelbrock #4461 Signature Series Valve Covers are designed for Ford 351M-400 and 351C V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.
Product Features:
See More
Product Features:
- Ford 351M-400 & 351C V8
- Short
- Chrome Steel
- Set Of Two
- Rubber Grommets For Breather
Most Sold 1979 Lincoln Mark V Performance Distributors
Explore our best-selling Lincoln parts for the 1979 Mark V among 7 OEM and aftermarket options starting from $15.99.
MSD Ignition – Distributor Cap/Rotor Kit; Ford Duraspark (Part No.8450)
from
$61.99
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2502)
from
$15.99
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed. Fits 1962-2001 Small Block Ford V8s, including both Windsor and Cleveland as well as Ford 385 series 429/460 big blocks including Boss models.
Product Features:
See More
Product Features:
- Eliminates bolt in favor of stud mount design
- Chrome plated
- Ideal For Ignition Distributor
Mallory – Malry Unilite Dist.: 68-95 351C-460 Ford (Part No.3756701)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Mallory – Distributor Drive Gear (Part No.29420)
from
$79.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)
from
$65.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Rotor phasing can be adjusted.
- Ideal When Atomic TBI Is Controlling The Timing
Accel – Distributor Cap And Rotor Kit (Part No.8223)
Accel – Distributor Cap And Rotor Kit (Part No.8224)
Top-Rated Performance and Racing Products Brands For Your 1979 Lincoln Mark V
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1979 Lincoln Mark Vs. Below you’ll find some of our best rated Performance and Racing Products from Mallory, Edelbrock, and B & M, and more. Performance and Racing Products from these brands that fit a 1979 Mark V start at just $30.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1979 Lincoln Mark V Performance and Racing Products
When it comes to maintaining or upgrading your 1979 Lincoln Mark V, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1979 Lincoln Mark V. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular Edelbrock 1979 Lincoln Mark V Performance and Racing Products
Edelbrock auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1979 Lincoln Mark V owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1979 Mark V, Advance Auto Parts carries a full inventory of 2 Edelbrock Performance and Racing Products. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these Edelbrock Performance and Racing Products range from $30.99 to $88.99, plus, with more than 2 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$88.99
(1)
Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2
“I replaced the stock valve covers on a 400M in a 1979 Bronco with these.The flanges are straight and mounting holes line up perfectly with the heads.T”
FAQs for 1979 Lincoln Mark V Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1979 Lincoln Mark Vs?
Out of 90 Performance and Racing Products that fit 1979 Lincoln Mark Vs, the following parts are the top sellers:
- Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2 (5027020) – $88.99
- PERFORMANCE OIL PAN GASKET SET (5189810) – $30.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
What’s the price range for 1979 Lincoln Mark V Performance and Racing Products?
Performance and Racing Product prices for the 1979 Lincoln Mark V start at $7.99 and go up to $823.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1979 Lincoln Mark V?
The average price for Performance and Racing Products for the 1979 Lincoln Mark V is $203.48. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Lincoln Mark V model years?
What are the cheapest Performance and Racing Products for my 1979 Lincoln Mark V?
The cheapest 1979 Lincoln Mark V Performance and Racing Products we carry in stock are:
- High Energy 9.440" Long, 5/16" Diameter Pushrod (50289314) – $7.99
- High Energy 9.500" Long, 5/16" Diameter Pushrod (50289671) – $7.99
- High Energy 8.412" Long, 5/16" Diameter Pushrod (50289661) – $7.99
- 7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring (50289506) – $10.99
- 7 Degree Steel Retainer for 11/32" Valve with 1.437"-1.500" Spring (50289120) – $10.99
What are the top-rated Performance and Racing Products that fit the 1979 Lincoln Mark V?
Out of 76 reviews by customers, our 1979 Lincoln Mark V Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1979 Lincoln Mark V and their top-rated products:
- Performance Shifters
- Automatic Shifter – Megashifter – Universal (6900895) – $527.99
- Automatic Shifter, StarShifter (6274609) – $340.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
- Performance Ignition Products
- Automatic Shifter – Megashifter – Universal (6900895) – $527.99
- Automatic Shifter, StarShifter (6274609) – $340.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
- Performance Exhaust Products
- Automatic Shifter – Megashifter – Universal (6900895) – $527.99
- Automatic Shifter, StarShifter (6274609) – $340.99
- Automatic Shifter, Z-Gate (6900216) – $299.99
What types of Performance and Racing Products do you sell for my 1979 Lincoln Mark V?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1979 Lincoln Mark V:
Can I get help with 1979 Lincoln Mark V Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Performance and Racing Products and more.
What is your return policy for Lincoln Mark V Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Lincoln Mark V Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
