1979 Lincoln Mark V Ignition and Tune-Up Products

Essential 1979 Lincoln Mark V Ignition and Tune-Up Products

ACDelco – Double Platinum Spark Plug (Part No.41-816)

Double Platinum Spark Plug

from

$9.49
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)

Crank Trigger Kit; Big Block Ford

from

$538.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • Absolutely the most accurate way to trigger the ignition
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
  • Incl. brackets/mounting hardware to fit a variety of engines
See More

Carquest Premium – Ignition Control Module Connector (Part No.PTA1257)

Ignition Control Module Connector

from

$15.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Distributor Rotor (Part No.D166)

Distributor Rotor

from

$12.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

MSD Ignition – Wire Set; Super Conductor; Ford 351M-400; HEI (Part No.31339)

Wire Set; Super Conductor; Ford 351M-400; HEI

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Carquest Premium – Ignition Switch (Part No.CSC1711)

Ignition Switch

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)

Spark Plug Non-Foulers - 14mm Tapered Seat

from

$6.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Distributor Cap (Part No.C194)

Distributor Cap

from

$19.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Each anti-lock speed sensor uses OE connectors and terminals ensuring an accurate water-tight connection to the engine wire harness
  • Grommets and wire clips are included on the harness ensuring proper mounting and routing within the car chassis for a cost effective repair solution
  • High-quality glass reinforced plastic resin provides both high temperature and environmental protection resistance
  • Each direct replacement wire harness comes with a protective sleeve preventing wires from chafing and creating short circuits
  • All ABS sensors are 100% tested for proper fit, form and function
See More

Driveworks – Electronic Ignition Coil (Part No.26286)

Electronic Ignition Coil

from

$36.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Mallory – Malry Unilite Dist.: 68-95 351C-460 Ford (Part No.3756701)

Malry Unilite Dist.: 68-95 351C-460 Ford

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1082)

Ignition Coil Connector

from

$18.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Accel – 8.8Mm Spiral Universal Fit (Part No.8033)

8.8Mm Spiral Universal Fit

from

$153.99
These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8094)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$65.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Dorman – Electrical Harness – 2-Wire Ignition Coil (Part No.85848)

Electrical Harness - 2-Wire Ignition Coil

from

$12.29
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)

Distributor Gear; Steel; Ford 351C; 460

from

$143.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Carquest Premium – Distributor Drive Gear (Part No.DGA1006)

Distributor Drive Gear

from

$35.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Ignition Pickup (Part No.ME12)

Distributor Ignition Pickup

from

$43.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High temperature enameled wires were specified for better insulation and performance
  • With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Distributor Ignition Pickup (Part No.MEC2266)

Distributor Ignition Pickup

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Reluctor (Part No.REA1001)

Distributor Reluctor

from

$7.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1054)

Distributor Vacuum Advance

from

$46.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1038)

Distributor Vacuum Advance

from

$48.49
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

PerTronix – 9FO-182 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl (Part No.9FO-182)

9FO-182 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl

from

$206.99
The Ignitor II has many of the same great features that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the en

Product Features:
  • PerTronix 9FO-182 Ignitor II Adaptive Dwell Control Ford Electronic Distributor 8 cyl
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1705)

Ignition Conversion Kit

from

$432.99
Ignition Conversion Kit

Carquest Premium – Ignition Module (Part No.CBG1008)

Ignition Module

from

$58.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Carquest Premium – Ignition Module (Part No.CBJ1076)

Ignition Module

from

$56.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

1979 Lincoln Mark V Ignition and Tune-Up Products

You count on your 1979 Lincoln Mark V to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 85 Ignition and Tune-Up Products ranging in price from $2.79 to $538.99, you’re sure to find everything you need for your 1979 Lincoln Mark V.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 15 different brands like ACDelco, E3, and Autolite. 1979 Lincoln Mark V Ignition and Tune-Up Products start as low as $2.79!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 492 extensive product reviews on 1979 Lincoln Mark V Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are High-Performance Shorty Spark Plugs for Header Clearance with 4.9 stars and Distributor Cap with 4.8 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1979 Lincoln Mark V below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1979 Lincoln Mark V

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Lincoln Mark V running right for years to come. In our inventory you’ll find brands like ACDelco, E3, Autolite, and even more.

Popular Champion Ignition and Tune-Up Products

You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1979 Lincoln Mark V back on the road. Some of the top-rated Champion products in these categories are:

Top-Rated Ignition and Tune-Up Products


If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 1979 Lincoln Mark V, and some of our most reviewed parts include:

FAQs for 1979 Lincoln Mark V Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1979 Lincoln Mark V?

Out of 85 Ignition and Tune-Up Products for the 1979 Lincoln Mark V, the most popular in our inventory are:

What are the top-rated 1979 Lincoln Mark V Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1979 Lincoln Mark V based on customer reviews/ratings are:
High-Performance Shorty Spark Plugs for Header Clearance
from $52.99
(36)
High-Performance Shorty Spark Plugs for Header Clearance
“Perfect great plugs for my Build. Great service to THANK YOU!”
Distributor Cap
from $19.05
(28)
Distributor Cap
“Works and fit good.”