1979 International Scout II Drivetrains
More 1979 International Scout II Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1979 International Scout II, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1979 International Scout II Drivetrains
Motive Gear – Differential Bearing Kit – Timken (Part No.RA28LRT)
from
$125.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- DANA-44 TIMKEN LATE
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.73 & Down (Part No.26026)
from
$869.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.73 ratio and down only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – Front Outer Replacement Axle Seal For Dana 30 And 44 Ihc (Part No.30071)
from
$11.99
Front outer replacement axle seal for Dana 30 and 44 IHC.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Fits Dana Spicer 30 and 44 in International Scout
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6048)
from
$46.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-96; DODGE 71-81; FORD 75-98; GMC 79-96; INTL 57-02; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1957-2013
- Weight approx: 6 Lbs
- BEARING ID / BORE: 1.9685 INCH / 50 MM
- CENTERLINE: 2.80 INCH / 71 MM
- MOUNT WIDTH: 7.62 INCH / 194 MM
Yukon Gear – Front Spindles For HD Axles For ’74-’82 Scout With Disc Brakes (Part No.21343)
from
$274.99
Front spindles for HD axles for ’74-’82 Scout with disc brakes. 8 mounting holes.
Product Features:
See More
Product Features:
- Spindle
- 8 mounting holes
- Fits 1974-1982 Scout with disc brakes
Yukon Gear – Dana 44 Chromoly Axle Kit Replacement (Part No.21329)
from
$1200.00
Yukon front 4340 Chrome-Moly replacement axle kit for ’71-’80 Dana 44 Scout with 27/30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Dana U/joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.
Product Features:
See More
Product Features:
- 30 spline inner and 27 spline outer
- Fits Dana Spicer 44 in 1971-1980 Scout
- Includes inner and outer 4340 Chromoly axles and Spicer U-Joints
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Replacement Standard Open Carrier Case For Dana 44, 3.92 & Up (Part No.20028)
from
$149.99
Yukon replacement standard open carrier case for Dana 44, 3.92 & up, 2-3/8″ tall.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Dana Spicer 44 with 30 spline axles
- 3.92 and up ratio only
- Does not include spider gears
Milemarker – MileMarker Supreme; Manual Hub (Part No.457)
from
$296.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Product Features:
See More
Product Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
Motive Gear – Differential Carrier Shim Kit (Part No.1115)
Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)
from
$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Axle Redi-sleeve
- Fits Dana Spicer 44
Driveworks – Taper Bearing Cone (Part No.S-M-86649)
from
$8.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.59015)
from
$289.99
Product Features:
See More
- Fits Chrysler Dana Spicer 44 with 30 spline axles
- 3.92 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Driveworks – Oil Seal (Part No.S-722109)
from
$5.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41020)
from
$125.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.125″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)
from
$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
- 3/4″ x 16 thread
Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)
from
$4.99
Product Features:
See More
- Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
Yukon Gear – (4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle (Part No.32084)
from
$19.99
(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.
Product Features:
See More
Product Features:
- Set of four full circle snap rings for Dana Spicer 30 and 44 and GM 8.5″ front
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Felpro – Axle Housing Cover Gasket (Part No.RDS 55019)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Motive Gear – Differential Gear Install Kit (Part No.D44IK)
Yukon Gear – Bearing Race Driver (Part No.56006)
from
$215.99
Bearing race driver for Dana 44 rear. (TK 31520) No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 31520 race
- All steel construction
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)
from
$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
- Includes axle bearing and seal
- Services one side
Popular 1979 International Scout II Drivetrains Categories
1979 International Scout II Drivetrains
You count on your 1979 International Scout II to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 271 Drivetrains ranging in price from $3.99 to $1,633.99, you’re sure to find everything you need for your 1979 International Scout II.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Valvoline, Moog, and Driveworks. 1979 International Scout II Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,967 extensive product reviews on 1979 International Scout II Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1979 International Scout II below to get started!
Top-Rated Drivetrains Brands For Your 1979 International Scout II
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 International Scout II running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Milemarker Drivetrains
You’ll find popular Milemarker brand products across 4WD Components. All are waiting to get your 1979 International Scout II back on the road. Some of the top-rated Milemarker products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1979 International Scout II, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1979 International Scout II Drivetrains
What are the most purchased Drivetrains for the 1979 International Scout II?
Out of 271 Drivetrains for the 1979 International Scout II, the most popular in our inventory are:
What are the top-rated 1979 International Scout II Drivetrains?
Top-rated Drivetrains for your 1979 International Scout II based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
