1979 GMC C1500 Bodies and Fender Parts

More 1979 GMC C1500 Bodies and Fender Parts

Find your specific 1979 GMC C1500 original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1979 GMC C1500 Bodies and Fender Parts

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More
View Product

KAI – Roll Pan (Part No.EFXRP21)

Roll Pan

from

$189.99
New ProEFX Rear Roll Pan, Stepside, With License Plate Part

Product Features:
  • Stepside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Wheel Arch Trim (Part No.GM1791102)

Wheel Arch Trim

from

$21.99
New Standard Replacement Rear Passenger Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Rocker Panel (Part No.RRP3790)

Rocker Panel

from

$97.99
New Standard Replacement Passenger Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:
  • 75 X 5.38 X 2.88, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – With Step Pads, 6" Oval Straight, Polished Ss, Requires Running Board Mount (Part No.DZ16103)

With Step Pads, 6" Oval Straight, Polished Ss, Requires Running Board Mount

from

$487.99
Trucks of today continue to get bigger and badder, and as they do it is gets harder to climb up into the cab. todays mammoth trucks deserve a beefy step to accent the rugged exterior, not a wimpy toothpick. Dee Zee has created 6 Inch Stainless Steel Nerf bars to help you enter and exit the truck with ease. The durable 16-guage steel foundation is overlaid with the brilliant shine of stainless steel. Rugged molded plastic step pads provide a non-slip surface so that you Do not have to worry about slipping and banging your shins. The steel underside and sturdy mounting brackets boast NRT (TM) texture black Powder Coated protection to repel rust formation. The durable mounting braces are specifically designed for your truck to ensure a perfect fit and eliminate drilling the frame.

Product Features:
  • Mount Kit Not Included
  • Drilling Not Required
  • Made From Rugged 16-Gauge Steel
  • 6 Inch Wide Design To Maximize Step Area
  • Molded Step Pads At Each Door Provide Unmatched Traction
  • Stainless Steel Covers Exterior Surface Areas
See More
View Product

KAI – Fender Molding (Part No.GMK4144115732R)

Fender Molding

from

$21.99
New Goodmark Front Passenger Side Lower Fender Molding, Except 1977 Models, Made Of Aluminum

Product Features:
  • Except 1977 Models Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit (Part No.DZ15301S)

Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit

from

$326.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zeeblack NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More
View Product

Dee Zee – Powder Coated, Black, Steel, Unlighted, 7"W x 90"L (Part No.DZ15321S)

Powder Coated, Black, Steel, Unlighted, 7"W x 90"L

from

$506.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zee black NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More
View Product

KAI – Wheel Arch Panel (Part No.RRP144)

Wheel Arch Panel

from

$33.99
New Standard Replacement Passenger Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:
  • 41 X 12 X 2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Wheel Arch Panel (Part No.RRP113)

Wheel Arch Panel

from

$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender Extension Panel (Part No.RRP114)

Fender Extension Panel

from

$24.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Quarter Panel (Part No.GMK4174610732R)

Quarter Panel

from

$119.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High

Product Features:
  • 7 3/4 Inches Wide X 14 1/2 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender Brace (Part No.GMK4144662731)

Fender Brace

from

$21.99
New Goodmark Rear Fender Center Brace, For Stepside Models, 4 Required, Made Of Steel

Product Features:
  • For Stepside Models 4 Required Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender (Part No.GM1241122)

Fender

from

$409.99
New Standard Replacement Passenger Side Fender

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$59.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – B-Pillar/Rocker Panel (Part No.RRP102)

B-Pillar/Rocker Panel

from

$41.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – B-Pillar/Rocker Panel (Part No.RRP103)

B-Pillar/Rocker Panel

from

$44.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Quarter Panel Patch (Part No.RRP150)

Quarter Panel Patch

from

$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28

Product Features:
  • 60 1/2 X 28, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104)

Backing Plate

from

$7.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4

Product Features:
  • 26 1/8 X 4 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104L)

Backing Plate

from

$13.99
New Standard Replacement Driver Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104R)

Backing Plate

from

$12.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP1250)

Floor Pan

from

$64.99
New Standard Replacement Passenger Side Cab Floor Panel, 15 1/2 X 30

Product Features:
  • 15 1/2 X 30, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP082)

Floor Pan

from

$101.99
New Standard Replacement Passenger Side Extended Cab Floor, 24 X 33

Product Features:
  • 24 X 33, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP083)

Floor Pan

from

$98.99
New Standard Replacement Driver Side Extended Cab Floor, 24 X 33

Product Features:
  • 24 X 33, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP1255)

Floor Pan

from

$239.99
New Standard Replacement Driver Side Complete Cab Floor Section, Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2

Product Features:
  • Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP146)

Floor Pan

from

$38.99
New Standard Replacement Passenger Side Front Cab Floor Section, 22 1/4 X 29

Product Features:
  • 22 1/4 X 29, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP1251)

Floor Pan

from

$69.99
New Standard Replacement Driver Side Cab Floor Panel, 18 5/8 X 29 1/8

Product Features:
  • 18 5/8 X 29 1/8, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP147)

Floor Pan

from

$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29

Product Features:
  • Front Section, 22 1/4 X 29, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

1979 GMC C1500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1979 GMC C1500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 33 different Bodies and Fender Parts in our inventory ranging from $7.99 to $661.99. That means you can find the exact parts or products you need to keep that 1979 GMC C1500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1979 GMC C1500. Dee Zee and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1979 GMC C1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1979 GMC C1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1979 GMC C1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1979 GMC C1500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your C1500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

FAQs for 1979 GMC C1500 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1979 GMC C1500?

Out of 33 Bodies and Fender Parts for the 1979 GMC C1500, the most popular in our inventory are:
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
from $39.49
This product is not rated
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
Splash Guard (Mud Flap)
B-Pillar/Rocker Panel
from $44.99
This product is not rated
B-Pillar/Rocker Panel
Body B-Pillar and Rocker Panels
Fender Brace
from $21.99
This product is not rated
Fender Brace
Fender Braces