1979 Ford LTD II Exhaust Parts
More 1979 Ford LTD II Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1979 Ford LTD II, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1979 Ford LTD II Exhaust Parts
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66014)
from
$51.99
Seal-4-Good Header Flange Gasket
Mr. Gasket – Mls Exhaust Gasket (Part No.4825G)
from
$29.49
Multi-Layered Steel (MLS) exhaust gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Product Features:
See More
Product Features:
- Designed for extreme cylinder pressures by high horsepower-high compression turbocharged, supercharged and nitrous oxide injected engines
- Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention
- Stress formed inner and outer layer embossments act like springs that rebound under flange clamp load, creating force to seal extreme pressures
- Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials
- Total gasket thickness .075 inch
Remflex – Exhaust Gasket, Ford V8 302, 351 Windsor, 1-1/8 Inch x 1-1/2 Inch, Square Port Size, Set of 2 (Part No.3003)
from
$37.49
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good. Whether you have an old pick up that needs a manifold gasket, or a race car with custom built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re Torqueing Necessary: Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re Torque
- Limited Six Months Warranty
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75114)
from
$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75115)
from
$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81102)
from
$678.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15052)
from
$234.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.53005)
from
$97.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
JBA Performance – 1615S 1 1/2" Header Shorty Stainless Steel Small Block Ford Universal 289/302/351 (Part No.1615S)
from
$471.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1615S 1 1/2″ Header Shorty Stainless Steel Small Block Ford Universal 289/302/351
- Mandrel bent stainless steel tube
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Felpro – Exhaust Pipe Flange Gasket (Part No.60309)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60308)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (Part No.03099)
from
$9.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03407B)
from
$24.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1979 Ford LTD II Exhaust Parts Categories
1979 Ford LTD II Exhaust Parts
You count on your 1979 Ford LTD II to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 24 Exhaust Parts ranging in price from $3.49 to $678.99, you’re sure to find everything you need for your 1979 Ford LTD II.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 10 different brands like Felpro, Dorman, and Flowtech. 1979 Ford LTD II Exhaust Parts start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 78 extensive product reviews on 1979 Ford LTD II Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed with 5.0 stars and Standard Grade Federal / EPA Compliant Universal Catalytic Converter with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1979 Ford LTD II below to get started!
Top-Rated Exhaust Parts Brands For Your 1979 Ford LTD II
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Ford LTD II running right for years to come. In our inventory you’ll find brands like Felpro, Dorman, Flowtech, and even more.
Popular Dorman – Help Exhaust Parts
You’ll find popular Dorman – Help brand products across Exhaust System Kits. All are waiting to get your 1979 Ford LTD II back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Exhaust Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 1979 Ford LTD II, and some of our most reviewed parts include:
FAQs for 1979 Ford LTD II Exhaust Parts
What are the most purchased Exhaust Parts for the 1979 Ford LTD II?
Out of 24 Exhaust Parts for the 1979 Ford LTD II, the most popular in our inventory are:
from
$9.29
This product is not rated
Exhaust Stud Kit – 7/16-14 x 2-1/4 In.
Exhaust Hangers and Hardware
What are the top-rated 1979 Ford LTD II Exhaust Parts?
Top-rated Exhaust Parts for your 1979 Ford LTD II based on customer reviews/ratings are:
from
$234.99
(1)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“Nice Cat. I don’t know what else to say. It fits and it works. Two thumbs up!”
from
$97.99
(1)
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
“MagnaFlow makes the best performance exhaust product’s on the market for the value.”
