1979 Ford LTD Exhaust Parts
Find Your Specific 1979 Ford LTD Exhaust Parts
Below you will find various in-demand Ford Exhaust Parts, components and accessories for your 1979 LTD. Advance Auto Parts has popular LTD parts like Exhaust Fittings, Exhaust Manifold and Headers, Exhaust Pipes and more. You’ll also find aftermarket and OEM Exhaust Parts for other LTD model years including
1983,
1984,
1985,
1986,
1987,
1988,
1989,
1990,
1991 and more. Select a category of 1979 Ford LTD Exhaust Parts below and start saving instantly.
Popular 1979 Ford LTD Exhaust Parts Categories
Essential Exhaust Parts for 1979 Ford LTDs
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18437)
from
$66.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Sound Solution Muffler (Part No.18692)
from
$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (Part No.03099)
from
$8.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Stud Kit – M11-1.75 x M12-1.75 x 65mm (Part No.03144)
from
$12.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Hooker Headers – Super Competition Header Gasket (Part No.10877HKR)
from
$23.49
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90000)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Aluminum Exhaust Gasket (Part No.7410G)
from
$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Reusable header, exhaust manifold and collector flange gaskets
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-230)
from
$168.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-153)
from
$122.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-173)
from
$213.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Walker – Exhaust Clamp (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Help – Cap Screw-Hex Head-Grade 8- 1/2-13 x 1-1/2 In. (Part No.03407)
from
$19.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mr. Gasket – Exhsthdrbolt (Part No.2231G)
from
$56.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 16 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Walker – Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Complete your exhaust repair with a Walker air intake tubing. Designed to work seamlessly with OE and Walker rubber intake parts, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CUSTOMIZABLE FIT¿– Universal fit for installation flexibility
- CUSTOMIZABLE FIT┐– Universal fit for installation flexibility
- COMPATIBILITY — Features OD-OD sized ends designed to work seamlessly with OE and Walker rubber intake parts
- QUALITY MATERIALS¿–¿Made from¿aluminum¿for durability and¿long life
- QUALITY MATERIALS┐–┐Made from┐aluminum┐for durability and┐long life
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker« accessories help to ensure effective exhaust repairs
- New Walker® accessories help to ensure effective exhaust repairs
Felpro – Exhaust Pipe Flange Gasket (Part No.60924)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60583)
from
$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – CalCat CARB Universal Catalytic Converter 2" Inlet (ID) 2" Outlet (ID) (Part No.80256)
from
$436.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.53005)
from
$97.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94005)
from
$147.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.337084)
from
$334.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 337084 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31336)
from
$6.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Upgrade your 1979 Ford LTD with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1979 Ford LTD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Exhaust Parts are key to keeping your LTD functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Exhaust Parts for the 1979 Ford LTD, designed to meet your needs without breaking the bank.
From
Exhaust Fitting
replacements to
Exhaust Manifold and Headers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1979 Ford LTD at great prices.
Our Exhaust Parts inventory for this model
ranges from just $1.99 to $588.99, with
an average price of $103.89.
Our 32 Exhaust Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1979 Ford LTD without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 Ford LTD, we stock popular OEM and aftermarket Exhaust Parts from top names
like FELPRO Mr. Gasket, and more.
FELPRO Exhaust Parts
start at just $3.49 and boast an impressive 5 stars average rating from customers.
With 132 customer reviews and counting, our 1979 Ford LTD Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1979 Ford LTD is always ready to roll. We’re committed to providing you with everything you need to keep your LTD in top shape, all in one place.
Start shopping confidently below for your 1979 Ford LTD!
Best-Selling Exhaust Fittings for 1979 Ford LTDs
Enhance the driving experience in your Ford with 1 quality Exhaust Fitting components, starting at $1.99.
Walker – Exhaust Clamp (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Most Popular 1979 Ford LTD Exhaust Manifold and Headers
Customize your Ford with 3 Exhaust Manifold and Headers products
like Exhaust Manifold and Headers and
Exhaust Manifold and Header Hardware, all
priced under $588.99.
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
JBA Performance – 1615SJS 1 1/2" Header Shorty Stainless Steel Small Block Ford Block Hugger 289/302/351 Silver Ceramic (Part No.1615SJS)
from
$588.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1615SJS 1 1/2″ Header Shorty Stainless Steel Small Block Ford Block Hugger 289/302/351 Silver Ceramic
- Mandrel bent stainless steel tube
JBA Performance – 1615S 1 1/2" Header Shorty Stainless Steel Small Block Ford Universal 289/302/351 (Part No.1615S)
from
$471.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1615S 1 1/2″ Header Shorty Stainless Steel Small Block Ford Universal 289/302/351
- Mandrel bent stainless steel tube
Top Picks for 1979 Ford LTD Exhaust Pipes
Upgrade Ford LTDs with top-quality Exhaust Pipes parts, including 2 OEM and aftermarket selections for your 1979 model.
Felpro – Exhaust Pipe Flange Gasket (Part No.60308)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60309)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
In-Demand Exhaust Hangers for 1979 Ford LTDs
Select from 1 premium Exhaust Hangers parts for your 1979 Ford LTD.
Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (Part No.03099)
from
$8.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Most Sold 1979 Ford LTD Exhaust Mufflers
Explore our best-selling Ford parts for the 1979 LTD among 4 OEM and aftermarket options starting from $58.99.
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.22105)
from
$105.99
The only broad-market muffler with 100% stainless-steel construction, Walker Quiet-Flow SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Sound Solution Muffler (Part No.18753)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18182)
from
$73.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
BRExhaust – Premium Universal Muffler (Part No.100-1757)
from
$58.99
This BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.
See More
Top-Rated Exhaust Parts Brands For Your 1979 Ford LTD
Shop for the best-rated brands offering Exhaust Parts and other products for your 1979 Ford LTDs. Below you’ll find some of our best rated Exhaust Parts from FELPRO and Mr. Gasket, and more. Exhaust Parts from these brands that fit a 1979 LTD start at just $3.49 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 1979 Ford LTD Exhaust Parts
When it comes to maintaining or upgrading your 1979 Ford LTD, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 1979 Ford LTD. With over 3 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.49, with an average price of just $12.82. Plus, with over 11 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Mr. Gasket 1979 Ford LTD Exhaust Parts
Mr. Gasket auto parts is one of the highest quality Exhaust Part brands in the market. Any 1979 Ford LTD owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1979 LTD, Advance Auto Parts carries a full inventory of 4 Mr. Gasket Exhaust Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Mr. Gasket Exhaust Parts range from $37.49 to $60.29, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
FAQs for 1979 Ford LTD Exhaust Parts
Which Exhaust Parts are best-sellers for 1979 Ford LTDs?
Out of 32 Exhaust Parts that fit 1979 Ford LTDs, the following parts are the top sellers:
- Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (17190183) – $8.99
- Terminator; Exhaust Tips (19310030) – $85.99
- Seal-4-Good Header Flange Gasket (10556708) – $51.99
What’s the price range for 1979 Ford LTD Exhaust Parts?
Exhaust Part prices for the 1979 Ford LTD start at $1.99 and go up to $588.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1979 Ford LTD?
The average price for Exhaust Parts for the 1979 Ford LTD is $103.89. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Ford LTD model years?
What are the cheapest Exhaust Parts for my 1979 Ford LTD?
The cheapest 1979 Ford LTD Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012223) – $1.99
- Exhaust Pipe Flange Gasket (5781078) – $3.49
- Exhaust Pipe Flange Gasket (5781094) – $3.49
- 2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (5601096) – $6.49
- Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (17190183) – $8.99
What are the top-rated Exhaust Parts that fit the 1979 Ford LTD?
Out of 132 reviews by customers, our 1979 Ford LTD Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1979 Ford LTD and their top-rated products:
- Exhaust Tips
- Terminator; Exhaust Tips (19310030) – $85.99
- Exhaust Gaskets
- Terminator; Exhaust Tips (19310030) – $85.99
What types of Exhaust Parts do you sell for my 1979 Ford LTD?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 1979 Ford LTD:
Can I get help with 1979 Ford LTD Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Exhaust Parts and more.
What is your return policy for Ford LTD Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Ford LTD Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
