1979 Ford Bronco Performance and Racing Products

Essential 1979 Ford Bronco Performance and Racing Products

Edelbrock – Elite Series; Valve Cover (Part No.4261)

Elite Series; Valve Cover

from

$148.99


Product Features:
  • Polished Finish
  • Raised Fins w/Black Mat Background
  • Detailed With Allen Hex Heads
  • 2 Piece Look; 1 Piece Construction
  • Clears Most Roller Rockers
  • Clears Valvetrain Components
  • Heavy Gauge
See More

Energy Suspension – Bushing Kit (Part No.4.7106G)

Bushing Kit

from

$95.99
Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Maintain Proper Caster Alignment
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.4.2102G)

Leaf Spring Bushing Set

from

$68.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Energy Suspension – C-Bushing (Part No.4.7103R)

C-Bushing

from

$59.99
Energy’s C-bushings for Ford trucks are a firmer durometer than O.E.M. rubber ones. They maintain proper caster alignment during all adverse conditions. Three degree styles are available to accommodate various vehicle lift configurations. They are available in 2, 4 and 7 degree positive caster, for stock and two height altered suspension configurations.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Maintain Proper Caster Alignment
  • Maximum Tensile Strength
See More

Edelbrock – Sure Seat Valve Springs for S/B Ford 289/302/351W O.E. Cast iron heads (Part No.5722)

Sure Seat Valve Springs for S/B Ford 289/302/351W O.E. Cast iron heads

from

$76.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

MSD Ignition – Distributor; Ford 351C-460; Vacuum Advance (Part No.8477)

Distributor; Ford 351C-460; Vacuum Advance

from

$532.99
The street Pro-Billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire RPM range of your engine and is completely maintenance-free.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • CARB E.O. Approved
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • QPQ coated polished steel shaft; guided by sealed ball bearings
See More

Richmond Gear – RngPnn (Part No.69-0284-1)

RngPnn

from

$577.99
RngPnn

Energy Suspension – Track Arm Bushing Set (Part No.4.7116R)

Track Arm Bushing Set

from

$16.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1613)

Engine Valve Cover Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)

High Perf. Full-Flow Lube Spin-on

from

$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.** 

Product Features:
  • Proven protection for up to 10,000 miles
  • Engineered for use with synthetic or conventional motor oils
  • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
  • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
See More

Mr. Gasket – Ultra Seal; Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal; Sure-Lock Rocker Arm Nuts

from

$77.99
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • Sure-lock rocker arm nuts
  • Precise valve train adjustment
  • Keep rocker arms locked
  • High-quality grade steel
  • Heat-treated for ex strength
  • Plated with durable gold tone finish
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1570)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$89.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470S)

Thermocap Radiator Cap

from

$54.99
Knowing your coolant temperature can help to prevent burn injuries. Thermo Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermo Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Check the Thermo Cap temperature indicator to determine if the coolant is cool enough to make removing Thermo Cap safe. If the coolant is very hot, then thoroughly rinse the radiator with cool water, until the coolant temperature drops into a cooler safe zone Thermo Cap’s integrated coolant reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree Fahrenheit temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges. Chromed crown with a colored trim ring. Indicates coolant temperature, Helps to prevent coolant injuries, integrated coolant reclamation valve, Improves under hood appearance, Fits most domestic or import vehicles and various valve pressures available.

Product Features:
  • Indicates coolant temperature
  • Helps to prevent coolant injuries
  • Integrated coolant reclamation valve
  • Improves under hood appearance
  • Fits most domestic vehicles
  • Built in calibrated thermometer
See More

Mr. Gasket – Precision Timing Tape (Part No.1594)

Precision Timing Tape

from

$18.99
Avoid trouble with this precision timing tape. Use it for accurate timing, setting valve lash or when degreeing the harmonic balancer.

Product Features:
  • Accurate in calibration
  • For hi-performance engines
  • Increased performance
  • Set valve lash at proper time
See More

Edelbrock – Pushrod Set for Ford 351M/400 (Part No.9633)

Pushrod Set for Ford 351M/400

from

$188.99
Product Features:
  • 9.5 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More

B & M – Torque Converter, Tork Master 2000 (Part No.40427)

Torque Converter, Tork Master 2000

from

$338.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Hypertech – Power Cap & Rotor Kit for Ford V8 with HEI (Part No.4062)

Power Cap & Rotor Kit for Ford V8 with HEI

from

$54.99
Hypertech’s Power Coil is capable of firing a street or slightly modified engine up to 7000 RPMs. Voltage gain over stock can exceed up to 57% more output depending on application. Stock coils usually average around 36,000 volts as compared to Hypertech’s coil kits that average between 45,000 and 55,000. Our coil kits include coil, brass terminals, cap, and rotor. Nylon rotor hold-down screws are included to prevent misfire, and our caps are made of high dielectric material to prevent carbon tracking. Each cap fits the distributor housing tightly to eliminate leakage. Power Coil/Caps/Rotors are NOT legal for sale/use in CA.

Product Features:
  • High Output Voltage
  • More Spark Energy
  • Up To 7000 RPMs
  • No Drop Off In Power As RPMs Increase
  • Wider Plug Gaps; Brass Terminals
  • Constructed w/Burn Through Resistant Materials
  • Excellent Dielectric Strength
  • Resists Carbon Tracking
See More

Edelbrock – Performer Intake Manifold Small-Block Ford (Part No.3721)

Performer Intake Manifold Small-Block Ford

from

$394.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

B & M – Automatic Shifter, Unimatic Shifter (Part No.80775)

Automatic Shifter, Unimatic Shifter

from

$259.99
The B&M Unimatic is an ideal replacement for column shift vehicles, includes neutral safety switch, 5 foot cable and a boot and plate.

Product Features:
  • Ideal As Column Shift Replacement
  • Includes Neutral Safety Switch
  • Includes Black T-Handle
  • Backup Light Not Available
  • Includes 5 ft. Cable and Hardware
  • Includes Boot and Plate
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

Exhaust Manifold Gasket Set

from

$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

MSD Ignition – Wire Set; Street Fire; Multi-Angle plug; HEI; Universal (Part No.5550)

Wire Set; Street Fire; Multi-Angle plug; HEI; Universal

from

$67.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Motive Gear – Differential Mini Spool (Part No.MS9-28)

Differential Mini Spool

from

$33.99


Product Features:
  • MINI SPOOL 8″ & 9″ 28 SPLN STL 090428
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)

Unilite Breakerless Ignition Conversion Kit

from

$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

Rancho – Dual Steering Damper Kit (Part No.RS98501)

Dual Steering Damper Kit

from

$251.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes two Rancho RS5000® steering stabilizers and installation brackets.

Product Features:
  • COMPATIBILITY — Designed for a variety of trucks and SUVs from Chevrolet®, GMC®, Ford®, Dodge®, Jeep® and Plymouth®
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
  • ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
  • EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
  • RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
  • PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 7 Piece Set (Part No.1240)

Lower Intake Manifold Gasket Set: 7 Piece Set

from

$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
  • 1970-82; w/2 Bbl. Cylinder heads
  • Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
  • Not intended for use in emission controlled vehicles.
See More

Weiand – Action +Plus; Water Pump (Part No.8209P)

Action +Plus; Water Pump

from

$300.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:
  • Fits Later Applications w/Water Inlet On LH Side
  • Street Performance
  • Heavy Duty Shaft w/5/8 in. Pilot
  • Six-Blade Stamped Steel
  • Anti-Cavitation Impeller
  • 100 Percent Leak Tested
  • Bearing Shaft And Seal
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1810)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets keep engines sealed under the most grueling racing conditions, from stock car racing to drag racing to off-road

Product Features:
  • Performance oil pan gasket set
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
See More

1979 Ford Bronco Performance and Racing Products

You count on your 1979 Ford Bronco to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 127 Performance and Racing Products ranging in price from $5.99 to $772.99, you’re sure to find everything you need for your 1979 Ford Bronco.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 19 different brands like K&N, Accel, and FEL-PRO Performance. 1979 Ford Bronco Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 169 extensive product reviews on 1979 Ford Bronco Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are High Perf. Full-Flow Lube Spin-on with 4.0 stars and Wire Set; Street Fire; Multi-Angle plug; HEI; Universal with 4.7 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1979 Ford Bronco below to get started!

Top-Rated Performance and Racing Products Brands For Your 1979 Ford Bronco

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Ford Bronco running right for years to come. In our inventory you’ll find brands like K&N, Accel, FEL-PRO Performance, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 1979 Ford Bronco back on the road. Some of the top-rated K&N products in these categories are:

Top-Rated Performance and Racing Products


If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 1979 Ford Bronco, and some of our most reviewed parts include:
Super Stock Coil
from $40.99
(54)
Super Stock Coil
Performance Coils

FAQs for 1979 Ford Bronco Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1979 Ford Bronco?

Out of 127 Performance and Racing Products for the 1979 Ford Bronco, the most popular in our inventory are:
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
Wire Set; Street Fire; V8 Multi-Angle; Socket/HEI Universal
from $67.99
(25)
Wire Set; Street Fire; V8 Multi-Angle; Socket/HEI Universal
Performance Spark Plug Wires
Tie Rod Dust Boot
from $9.99
(1)
Tie Rod Dust Boot
Performance Tie Rod End Boots

What are the top-rated 1979 Ford Bronco Performance and Racing Products?

Top-rated Performance and Racing Products for your 1979 Ford Bronco based on customer reviews/ratings are:
High Perf. Full-Flow Lube Spin-on
from $16.99
(4)
High Perf. Full-Flow Lube Spin-on
“Filter size for my boat. OMC 460. works fine. HP filters have a bypass so that clogs do not cause the engine to starve for oil… important for HP eng”
Wire Set; Street Fire; Multi-Angle plug; HEI; Universal
from $67.99
(3)
Wire Set; Street Fire; Multi-Angle plug; HEI; Universal
“GREAT PRODUCT”
Automatic Shifter, Unimatic Shifter
from $259.99
(3)
Automatic Shifter, Unimatic Shifter
“Super easy to install, works nice.”