1979 Ford Bronco Drivetrains
Find Your Specific 1979 Ford Bronco Drivetrains
Below you will find various in-demand Ford Drivetrains, components and accessories for your 1979 Bronco. Advance Auto Parts has popular Bronco parts like 4WD Components, Transfer Cases, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other Bronco model years including
1991,
1992,
1993,
1994,
1995,
1996,
2021,
2022,
2023 and more. Select a category of 1979 Ford Bronco Drivetrains below and start saving instantly.
Popular 1979 Ford Bronco Drivetrains Categories
Essential Drivetrains for 1979 Ford Broncos
Schaeffler – Shaft Seal (Part No.SS2633)
from
$28.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)
from
$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.
Product Features:
See More
Product Features:
- Axle stud for AMC Model 20 and Model 35
- 1/2″ x 20 thread
- 0.620″ knurl diameter
- 1.625″ long
National – Shaft Repair Sleeve (Part No.99174)
from
$45.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.92 & Up (Part No.26027)
from
$809.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.92 ratio and up only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
National – Tapered Roller Bearing Cone (Part No.HM88649)
from
$19.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)
from
$4.99
Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).
Product Features:
See More
Product Features:
- Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
- Intalls next to side gear
National – Wheel Bearing and Seal Kit (Part No.SBK-1)
from
$19.99
The National bearing & seal kit includes all the components required to complete the repair.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION – Includes everything needed to complete the repair
- STRONG AND DURABLE – Controlled heat treatment process for strength and durability
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
- Professional technicians know they can depend on National
Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)
from
$6.79
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)
from
$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.
Product Features:
See More
Product Features:
- Side adjuster
- Fits Ford 9″
- 3.062″ designs only
Motive Gear – Differential Pinion Seal (Part No.7044NA)
from
$12.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)
Yukon Gear – (4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle (Part No.32084)
from
$19.99
(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.
Product Features:
See More
Product Features:
- Set of four full circle snap rings for Dana Spicer 30 and 44 and GM 8.5″ front
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)
from
$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.
Product Features:
See More
Product Features:
- Bearing race driver set
- 21 pieces
- All steel construction
Schaeffler – Bearing (Part No.B2110)
from
$7.59
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Dorman – Drive Shaft: Greaseable, Adjustable (Part No.986-515)
from
$1101.00
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Schaeffler – Shaft Seal (Part No.SS3163)
from
$14.29
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Yukon Gear – Positraction Internals For 8" And 9" Ford With 28 Spline Axles, In A 4-Pinion Design (Part No.16023)
from
$315.99
Yukon positraction internals for 8″ and 9″ Ford with 28 spline axles, in a 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Ford 9″ with Trac Loc positraction with 28 spline axles
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Richmond Gear – Differential Spool (Part No.81-0928-1)
from
$259.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Yukon Gear – Ford 9" Pinion Support, 35 Spline, 10 Hole, No Races Included (Part No.32165)
from
$569.99
Ford 9″ pinion Support, 35 spline, 10 hole, no races included.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 35 spline pinion
- Larger inner pinion bearing reduces gear deflection under high load
- 6061 aluminum
- 10 bolt holes
- Does not include races
Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)
from
$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.
Product Features:
See More
Product Features:
- Pinion support bolt for Ford 9″
- 3/8″ x 24 thread
- 1.5″ long
Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)
from
$4.99
Trac Loc clutch guide for 9″ Ford.
Product Features:
See More
Product Features:
- Clutch guide
- Fits Ford 8″ and 9″
Yukon Gear – Wiper Kit Small With 8 Retaining Bolts, Dana 25, Dana 27, Dana 30, & Dana 44 (Part No.32302)
from
$138.99
Wiper kit SMALL w/8 retaining bolts, Dana 25, Dana 27, Dana 30, & Dana 44.
Product Features:
See More
Product Features:
- Fits Dana Spicer 25, 27, 30 and 44 front
- 8 bolt design
- Services one side
Yukon Gear – O-Ring For 9" Ford (Part No.30028)
from
$14.99
O-ring for 9″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion support o-ring
- Fits Ford 9″
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)
from
$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 26 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Mr. Gasket – Rear End Gasket – Ford 9" – Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability (Part No.82)
from
$25.99
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1957-1981 Ford 10 bolt 9 inch ring gear.
Product Features:
See More
Product Features:
- .047″ thick cellulose/nitrile composite gasket material
- Precision die cut
- Reusable
Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)
Upgrade your 1979 Ford Bronco with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1979 Ford Bronco, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Bronco functioning at its best. At Advance Auto Parts, we offer a wide selection of 554 Drivetrains for the 1979 Ford Bronco, designed to meet your needs without breaking the bank.
From
4WD Component
replacements to
Transfer Cases
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1979 Ford Bronco at great prices.
Our Drivetrains inventory for this model
ranges from just $1.99 to $1,566.99, with
an average price of $218.60.
Our 554 Drivetrains in stock come from 20 trusted brands, so you’re sure to find the right part for your 1979 Ford Bronco without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 Ford Bronco, we stock popular OEM and aftermarket Drivetrains from top names
like Milemarker, National, Driveworks, and more.
Milemarker Drivetrains
start at just $68.99 and boast an impressive 4.4 stars average rating from customers.
National and Driveworks also bring quality to the table, with Drivetrains available starting at $5.99, and at an average 4.3 stars rating.
With 1,318 customer reviews and counting, our 1979 Ford Bronco Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1979 Ford Bronco is always ready to roll. We’re committed to providing you with everything you need to keep your Bronco in top shape, all in one place.
Start shopping confidently below for your 1979 Ford Bronco!
Best-Selling 4WD Components for 1979 Ford Broncos
Enhance the driving experience in your Ford with 3 quality 4WD Component components, starting at $116.99.
Milemarker – MileMarker Street Master; Manual Hub (Part No.302)
from
$116.99
Black nylon reinforced fiberglass dial. Limited lifetime warranty. 19 spline, internal bolts. Chrome.
Product Features:
See More
Product Features:
- Black Nylon Reinforced Fiberglass Dial
- Limited Lifetime Warranty
Milemarker – MileMarker Supreme; Manual Hub (Part No.104)
from
$204.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Product Features:
See More
Product Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
Warn – HUB 4X4-PREM MAN LCK (Part No.20990)
from
$297.99
HUB 4X4-PREM MAN LCK
Most Popular 1979 Ford Bronco Transfer Cases
Customize your Ford with 21 Transfer Cases products
like Input Shaft Bearings,
Transfer Case Output Shaft Seals, and
Input Shaft Seals, all
priced under $289.99.
National – Bearing (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.B-2110)
from
$17.99
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Shaft Repair Sleeve (Part No.99138)
from
$30.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99199)
from
$37.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Driveworks – Needle Bearing (Part No.S-B-2110)
from
$7.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Seal (Part No.710005)
from
$11.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Tapered Roller Bearing Cone (Part No.2793)
from
$43.49
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi Purpose Seal (Part No.7412S)
from
$4.99
Product Features:
See More
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Bearing Race (Part No.HM88610)
from
$15.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Seal (Part No.473468)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi-Purpose Bearing (Part No.307-L)
from
$43.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Manual Transmission Input Shaft Seal (Part No.482163N)
from
$5.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi-Purpose Seal (Part No.471869)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Manual Transmission Input Shaft Seal (Part No.482208)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
USA Standard Gear – TCaseInputShaftSeal (Part No.70552)
from
$13.99
TCaseInputShaftSeal
USA Standard Gear – TCaseBrg-SealKit (Part No.70250)
from
$289.99
TCaseBrg-SealKit
USA Standard Gear – TCaseBrg-SealKit (Part No.75723)
from
$264.99
TCaseBrg-SealKit
National – Multi-Purpose Bearing (Part No.1210-L)
from
$89.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
USA Standard Gear – TCaseGasketSealKit (Part No.71015)
from
$36.99
TCaseGasketSealKit
Schaeffler – Cup (Part No.M88010)
from
$11.29
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Schaeffler – Cup (Part No.LM102910)
from
$10.29
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Top Picks for 1979 Ford Bronco Differentials
Upgrade Ford Broncos with top-quality Differentials parts, including 436 OEM and aftermarket selections for your 1979 model.
Felpro – Differential Carrier Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55074)
from
$9.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Driveworks – Taper Bearing Cone (Part No.S-LM-501349)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Shaft Repair Sleeve (Part No.99193)
from
$43.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Powertrax – No-Slip Traction System (Part No.9206902800)
from
$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
See More
Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 6629)
from
$7.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
National – Differential Pinion Seal (Part No.5778)
from
$23.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Driveworks – Taper Bearing Cone (Part No.S-LM-102949)
from
$15.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)
from
$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Dorman – Help – Pinion Crush Sleeves (Part No.81056)
from
$6.49
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
- Required replacement – when servicing the differential
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)
from
$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
- 3/8″ x 24 thread
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)
from
$7.99
7/16″ TO 3/8″ ring gear bolt spacer sleeve.
Product Features:
See More
Product Features:
- Ring gear bolt sleeve
- Adapts 7/16″ to 3/8″
Yukon Gear – Crush Sleeve (Part No.33085)
from
$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
- 0.480″ tall
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
National – Tapered Roller Bearing Cone (Part No.02872)
from
$24.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33058)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt. 7/16″ head, .925″ long.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 7/16″ head
- .925″ long
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 1.0″ long
Yukon Gear – Ford 8" & 9" Tracloc Ring Gear Bolt (Part No.33044)
from
$4.99
Ford 8″ & 9″ TracLoc ring gear bolt, 1-1/4″ long.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with Trac Loc limited slip
- 1.25″ long
Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)
Yukon Gear – Pinion Nut (Part No.33154)
from
$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.
Product Features:
See More
Product Features:
- Pinion nut for Ford 7.5″, 8″ and 9″
- 3/4″ x 20 thread
- 1 1/6″ socket
In-Demand Universal Joints for 1979 Ford Broncos
Select from 45 premium Universal Joints parts for your 1979 Ford Bronco, with prices ranging from $4.19 to $609.99.
Spicer – Universal Joint, Greaseable 1330 Series OSR (Part No.5-213X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.534-10)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 375, 430, 434 & 498
- Fits 1-1/8″ bearings
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)
from
$34.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASEABLE DESIGN – Greaseable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Driveworks – Universal Joint (Part No.DW-354)
from
$31.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)
from
$23.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.371)
from
$40.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.377)
from
$55.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Driveworks – Universal Joint (Part No.DW-377)
from
$29.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Driveworks – Universal Joint (Part No.DW-434)
from
$16.49
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)
from
$39.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.434)
from
$25.99
Product Features:
See More
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Dorman – Help – U-Joint Bolt Kit (Part No.81004)
from
$6.99
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Neapco – Universal Joint (Part No.2-4801)
Neapco – Universal Joint (Part No.2-4800)
Driveworks – Universal Joint (Part No.DW-371)
from
$24.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Driveworks – Universal Joint (Part No.DW-270)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Spicer – Universal Joint (Part No.5-1330X)
from
$40.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.265)
from
$38.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.608)
from
$159.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Yukon Gear – Axle U/Joint For Dana 30, 44 & GM 8.5" Front (Part No.42018)
from
$73.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44 TJ Rubicon
- 8.50″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 5.13 ratio
Spicer – Universal Joint, Greaseable 1330-F Spec Series (Part No.5-1204X)
from
$36.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
Spicer – Universal Joint (Part No.5-7438X)
from
$45.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
Most Sold 1979 Ford Bronco Drive Shafts and Axles
Explore our best-selling Ford parts for the 1979 Bronco among 34 OEM and aftermarket options starting from $4.99.
Spicer – Universal Joint (Part No.5-760X)
from
$55.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
See More
Driveworks – Oil Seal (Part No.S-8835S)
from
$6.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Shaft Repair Sleeve (Part No.99174)
from
$45.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Drive Shaft Center Support Bearing (Part No.HB-88107-A)
from
$44.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$21.99
Anchor 6056 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 In. / 35 mm
- CENTERLINE: 2.28 In. / 58 mm
- Mount Width: 6.62 In. / 168 mm
- Style: Round Frame
- Complete Mount
National – Tapered Roller Bearing Cone (Part No.HM88649)
from
$19.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)
from
$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.
Product Features:
See More
Product Features:
- Axle stud for Ford 7.5″, 8.8″ and 9″
- 1/2″ x 20 thread
- 1 7/8″ long
- 29/64″ shoulder length
Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)
from
$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fill plug
- Fits Ford 9″
National – Multi-Purpose Bearing (Part No.207-L)
from
$37.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Shaft Repair Sleeve (Part No.99125)
from
$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Yukon Gear – Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford (Part No.10058)
from
$111.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Tapered axle bearing and seal kit, 3.150″ OD, for 9″ Ford. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Ford 9″ rear
- Includes axle bearing and seal
- Tapered roller design
- 3.150″ O.D.
- 1.562″ I.D.
- Services one side
Yukon Gear – Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes (Part No.33467)
from
$67.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits large bearing applications
- 1/2″ bolt holes
- 3 1/2″ x 2 3/8″ bolt pattern
Yukon Gear – Straight Inner Axle Replacement Seal For Dana 44 Front, Reverse Rotation (Part No.30025)
from
$29.99
Straight inner axle replacement seal for Dana 44 4WD reverse rotation.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner front axle seal
- Fits reverse rotation Dana Spicer 44
Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)
from
$4.99
Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).
Product Features:
See More
Product Features:
- Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
- Intalls next to side gear
Yukon Gear – Dana 44 Outer Stub Axle Replacement (Part No.21108)
from
$179.99
Yukon 1541H replacement outer stub axle shaft for Dana 44, ’71-’79 Ford Bronco with a length of 9.72 inches and with 19 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
- Outer stub
- 19 spline
- 9.72″ from end of splines to center of u-joint bore
Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)
from
$121.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Outer Axle Seal For Set 20 Bearing (Part No.30030)
from
$14.99
Outside seal (included in TK set20).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Works with Set20 bearing
Yukon Gear – Axle Bearing For 9" Ford, 3.150" O.D. (Part No.10062)
from
$128.99
F9″ Large sealed able bearing , ID = 1.562″ OD = 3.150″ w/Outer O-ring (no Inner seal required) . This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing for Ford 9″
- Sealed design
- 3.150″ O.D.
- 1.562″ I.D.
- Services one side
USA Standard Gear – Driveshaft – Rear (Part No.44085)
from
$566.99
Driveshaft – Rear
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Non-Engraved Caps (Part No.29079)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 19 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Yukon Gear – Ford 9" (3/8" Holes) Torino Design Housing Ends (Part No.32160)
from
$279.99
9″ (3/8″ holes) Torino design housing ends for Ford (for 2-5/8″ ID axle tube).
Product Features:
See More
Product Features:
- Housing ends
- Fits Ford 9″
- 3 9/16″ x 2″ bolt pattern
- 3/8″ bolt holes
- Set of two
Yukon Gear – 4340 Chrome-Moly Outer Stub For Ford F150, Bronco, Wagoneer (Drum Brakes) Uses 5-760X U/Joint (Part No.21356)
from
$253.99
Yukon 4340 Chrome-Moly outer stub for Ford F150, Bronco, Wagoneer (drum brakes) with a length of 9.72″ and 19 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
- 4340 Chromoly
- Outer stub
- 19 spline
- 9.72″ from end of splines to center of u-joint bore
USA Standard Gear – 4340 Chrome Moly Axle, Bronco & F150 Outer Stub, Uses 5-760X U/Joint (Part No.35079)
from
$238.99
9.72″ 19spline 297X Bronco & F150, Wagoneer w/drum brakes, outer stub.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
- 4340 Chromoly
- Outer stub
- 19 spline
- 9.72″ from end of splines to center of u-joint bore
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Top-Rated Drivetrains Brands For Your 1979 Ford Bronco
Shop for the best-rated brands offering Drivetrains and other products for your 1979 Ford Broncos. Below you’ll find some of our best rated Drivetrains from Milemarker, National, and Driveworks, and more. Drivetrains from these brands that fit a 1979 Bronco start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Milemarker 1979 Ford Bronco Drivetrains
When it comes to maintaining or upgrading your 1979 Ford Bronco, using quality Drivetrains is essential to ensure durability and a perfect fit. Milemarker ticks all of those boxes. We offer a wide selection of Milemarker Drivetrains, specifically designed for the 1979 Ford Bronco. With over 3 Milemarker brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $68.99, with an average price of just $130.32. Plus, with over 33 customer reviews and an average rating of 4.4 stars, you can trust that our Milemarker Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$116.99
(19)
MileMarker Street Master; Manual Hub
“Good and easy to install. did not need the install kit that i was told i needed for my 1994 f150.”
Popular National 1979 Ford Bronco Drivetrains
National auto parts is one of the highest quality Drivetrain brands in the market. Any 1979 Ford Bronco owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1979 Bronco, Advance Auto Parts carries a full inventory of 3 National Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Drivetrains range from $15.99 to $19.99, plus, with more than 19 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
FAQs for 1979 Ford Bronco Drivetrains
Which Drivetrains are best-sellers for 1979 Ford Broncos?
Out of 554 Drivetrains that fit 1979 Ford Broncos, the following parts are the top sellers:
- Universal Joint (10265720) – $31.99
- Non-Greaseable Super Strength Universal Joint (10087058) – $23.99
- Non-Greaseable Super Strength Universal Joint (10086913) – $40.99
What’s the price range for 1979 Ford Bronco Drivetrains?
Drivetrain prices for the 1979 Ford Bronco start at $1.99 and go up to $1,566.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1979 Ford Bronco?
The average price for Drivetrains for the 1979 Ford Bronco is $218.60. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Ford Bronco model years?
What are the cheapest Drivetrains for my 1979 Ford Bronco?
The cheapest 1979 Ford Bronco Drivetrains we carry in stock are:
- Ring Gear Bolt (19640279) – $1.99
- Differential Crush Sleeve (10282338) – $2.99
- Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (11642796) – $3.99
- Trac Loc Ring Gear Bolt Washer For 8" And 9" Ford (11643118) – $3.99
- Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (11642694) – $3.99
What are the top-rated Drivetrains that fit the 1979 Ford Bronco?
Out of 1,318 reviews by customers, our 1979 Ford Bronco Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1979 Ford Bronco and their top-rated products:
- Universal Joints
- Universal Joint, Greaseable 1330 Series OSR (10854997) – $42.99
- Universal Joint U-Bolt Kit (10086976) – $11.99
- Greaseable Super Strength Universal Joint (10086920) – $55.99
- 4WD Components
- Universal Joint, Greaseable 1330 Series OSR (10854997) – $42.99
- Universal Joint U-Bolt Kit (10086976) – $11.99
- Greaseable Super Strength Universal Joint (10086920) – $55.99
- Spindles
- Universal Joint, Greaseable 1330 Series OSR (10854997) – $42.99
- Universal Joint U-Bolt Kit (10086976) – $11.99
- Greaseable Super Strength Universal Joint (10086920) – $55.99
What types of Drivetrains do you sell for my 1979 Ford Bronco?
As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 1979 Ford Bronco:
Can I get help with 1979 Ford Bronco Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.
What is your return policy for Ford Bronco Drivetrains?
Advance Auto Parts keeps returns simple. For new Ford Bronco Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
