1979 Chevrolet C30 Ignition Coils and Boots
More 1979 Chevrolet C30 Ignition Coils and Boots
Find your specific 1979 Chevrolet C30 original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1979 Chevrolet C30 Ignition Coils and Boots
MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)
from
$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1483)
from
$33.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil (Part No.E43)
from
$40.99
BWD SELECT® replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- The BWD SELECT® HEI/DIS ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest – Ignition Coil (Part No.26C1078)
from
$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.
Product Features:
See More
Product Features:
- High output
- Long spark duration
- High dielectric strength
- Corrosion resistant connections
- High reliability
- Long service life
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8027)
from
$73.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8007)
from
$61.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8016)
from
$49.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
NGK – NGK Wire Set (Part No.51434)
from
$40.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Accel – 8Mm Super Stock Spiral Cust Rd (Part No.5048R)
from
$86.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- High-strength Fiberglass Braid Construction
- 8mm High Gloss Silicone Jacket
- 500 Ohms Resistance
DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6020)
from
$60.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)
from
$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8008)
from
$63.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9508N)
from
$63.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Ignition Coil Ground Strap (Part No.DLA1034)
from
$4.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed to meet or exceed OE specifications in form, fit and function
- Attaching hardware provided (where applicable)
Carquest Premium – Distributor Connector (Part No.FAA1133)
from
$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Popular 1979 Chevrolet C30 Ignition Coils and Boots Categories
1979 Chevrolet C30 Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1979 Chevrolet C30. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 20 different Ignition Coils and Boots in our inventory ranging from $4.49 to $181.99. That means you can find the exact parts or products you need to keep that 1979 Chevrolet C30 running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1979 Chevrolet C30. Carquest Premium, Accel, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1979 Chevrolet C30, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 50 reviews in this category, some of the top rated parts include 8Mm Super Stock Spiral Cust Rd with 5.0 stars and High Energy Ignition Coil for GM HEI Distributors with 5.0 stars.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1979 Chevrolet C30 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1979 Chevrolet C30 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1979 Chevrolet C30 demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your C30 the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Ignition Coils and Boots
We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 1979 Chevrolet C30, our most popular Carquest Ignition Coils and Boots include:
Top 1979 Chevrolet C30 Ignition Coils and Boots from Accel
Accel products are another trusted brand when it comes to Ignition Coils and Boots for your 1979 Chevrolet C30. Popular Accel parts include:
FAQs for 1979 Chevrolet C30 Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1979 Chevrolet C30?
Out of 20 Ignition Coils and Boots for the 1979 Chevrolet C30, the most popular in our inventory are:
from
$33.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
from
$28.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
What are the top-rated 1979 Chevrolet C30 Ignition Coils and Boots?
Top-rated Ignition Coils and Boots for your 1979 Chevrolet C30 based on customer reviews/ratings are:
from
$65.99
(1)
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
“The coil wire was 16 in too short. I had to buy a coil wire to install. To put the ends on the spark plug wires I had to order a special tool which de”
