1978 Volkswagen Super Beetle Ignition and Tune-Up Products

Essential 1978 Volkswagen Super Beetle Ignition and Tune-Up Products

PerTronix – 1847A Ignitor for Bosch 009 4 cyl (Part No.1847A)

1847A Ignitor for Bosch 009 4 cyl

from

$110.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1847A Ignitor for Bosch 009 4 cyl
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

Pertronix – IGNITION CONVERSION KIT (Part No.F202963638PTX)

IGNITION CONVERSION KIT

from

$216.34
BOSCH 4 CYL w/ Vacuum Advance Distributor (1847V) This aftermarket kit replaces the standard 4cyl vacuum advance Bosch distributors equipped points and condenser type ignition. Not for 0 231 178 009 or 9 230 081 050 distributors. The PerTronix Igniter replaces breaker point and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition system. The Igniter has been called the “stealth” ignition because of its quick installation and nearly undetectable presence under your distributor cap. FEATURES:

Product Features:
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over points in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit – no points to burn, – no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Fits entirely inside the distributor.
  • No “black box to clutter the engine compartment.
  • Stable timing …no need for any adjustments.
  • Will trigger most multi-spark CD ignitions.
  • Use with Flame-Thrower® 40,000 volt coil for optimal performance.
  • Available for 6 and 12-volt negative and positive ground systems.
  • Legal in all 50 states and Canada (C.A.R.B. E.O. #D-57-2).
  • Guaranteed for 30 months… SPECIFICATIONS:
  • Operating Voltage: 8-V to 16-V DC
  • Temperature Range: -50 to 300F
  • RPM Range: 0 to 15,000 RPM
See More

Spectra Premium – Distributor (Part No.VW10)

Distributor

from

$126.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium distributors meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
  • OE design cap and replacement rotor included for fast installation
  • All units new, no rebuilds or core charges
  • All unit components are computer tested to ensure full functionality
  • Each new distributor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
See More

Carquest Premium – Distributor T946: 100% New, With Cap and Rotor (Part No.T946)

Distributor T946: 100% New, With Cap and Rotor

from

$72.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Distributor Cap (Part No.C546)

Distributor Cap

from

$8.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:
  • Each fuel vapor canister is designed and tested to OE specifications for a direct-fit replacement controlling the loss of evaporative emissions from fuel systems to the environment.
  • Every fuel vapor canister includes an integrated check valve with an operating pressure calculated according to your vehicle’s specific needs.
  • Each fuel vapor canister is built for pressurized fuel systems to sustain creep loads.
  • All of our fuel vapor canister come in various sizes for different fuel systems and is manufactured with the highest grade materials ensure precision performance
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Distributor Cap (Part No.CAC1319)

Distributor Cap

from

$7.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSA4429)

Ignition Switch

from

$73.99
Ignition Switch

APA/URO Parts – Ignition Switch (Part No.M505014778APA)

Ignition Switch

from

$10.22
Ignition Switch

Carquest Premium – Ignition Switch (Part No.CSA1466)

Ignition Switch

from

$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

DENSO – Spark Plug Wire Set: Copper Core, 5 Wire Set (Part No.671-4086)

Spark Plug Wire Set: Copper Core, 5 Wire Set

from

$61.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4026)

Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit

from

$44.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

DENSO – First Time Fit Ignition Wire Set (Part No.F1020689156ND)

First Time Fit Ignition Wire Set

from

$65.40
The Denso First Time Fit ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40F to 428 F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Carbon fiberglass core for superior conductivity.
  • Fiberglass braiding for strength.
  • Conductive silicone layer for EMI/RFI noise suppression.
  • Silicone insulation for superior dielectric and heat performance.
  • Reinforced Kevlar core.
See More

Bosch – Bosch Distributor Rotor (Part No.F202036703BOS)

Bosch Distributor Rotor

from

$17.10
Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Resistors (Asian) / RFI Suppression (European)
  • Installation Screws
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve (Asian)
See More

Carquest – Distributor Rotor (Part No.D563)

Distributor Rotor

from

$10.05
Intermotor is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor is the import leader by design.

Product Features:
  • High dielectric-strength engineering polymer prevents breakdown or arcing and ensures long life
  • Solid brass segment resists pitting and erosion for extended life
  • Utilizes shaft retention clips for proper fit of distributor shaft
  • Stainless steel spring ensures positive contact with distributor cap brush while resisting corrosion and wear
See More

Carquest Premium – Distributor Rotor (Part No.DAA1146)

Distributor Rotor

from

$8.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Condenser (Part No.GAA1169)

Ignition Condenser

from

$22.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Condenser (Part No.GAA1173)

Ignition Condenser

from

$21.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Bosch Ignition Condenser (Part No.F204016225BOS)

Bosch Ignition Condenser

from

$11.51
Bosch Ignition Condensers are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • Installation Screws
See More

Bosch – Bosch Ignition Condenser (Part No.F204024425BOS)

Bosch Ignition Condenser

from

$14.35
Bosch Ignition Condensers are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • Installation Screws
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.425)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

Champion – Copper Plus Small Engine- Boxed – L90C (Part No.896)

Copper Plus Small Engine- Boxed - L90C

from

$2.49
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RL86C (Part No.830)

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RL86C

from

$2.99
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

NGK – OE Series Standard Nickel Spark Plug: Conventional Tip Design, BR6HS (Part No.3922)

OE Series Standard Nickel Spark Plug: Conventional Tip Design, BR6HS

from

$4.29
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
  • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
  • NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1527)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$17.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1464)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$61.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1487)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

1978 Volkswagen Super Beetle Ignition and Tune-Up Products

You count on your 1978 Volkswagen Super Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 29 Ignition and Tune-Up Products ranging in price from $2.99 to $216.34, you’re sure to find everything you need for your 1978 Volkswagen Super Beetle.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 12 different brands like NGK, Champion, and Carquest Premium. 1978 Volkswagen Super Beetle Ignition and Tune-Up Products start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 37 extensive product reviews on 1978 Volkswagen Super Beetle Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Distributor Cap with 4.6 stars and Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach with 3.7 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1978 Volkswagen Super Beetle below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1978 Volkswagen Super Beetle

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Volkswagen Super Beetle running right for years to come. In our inventory you’ll find brands like NGK, Champion, Carquest Premium, and even more.

Popular Autolite Ignition and Tune-Up Products

You’ll find popular Autolite brand products across Spark Plugs. All are waiting to get your 1978 Volkswagen Super Beetle back on the road. Some of the top-rated Autolite products in these categories are:

FAQs for 1978 Volkswagen Super Beetle Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1978 Volkswagen Super Beetle?

Out of 29 Ignition and Tune-Up Products for the 1978 Volkswagen Super Beetle, the most popular in our inventory are:
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
from $41.49
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils

What are the top-rated 1978 Volkswagen Super Beetle Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1978 Volkswagen Super Beetle based on customer reviews/ratings are:
Distributor Cap
from $8.05
(5)
Distributor Cap
“The distribution cap which is difficult to find due to the keying fits my 1987 Volvo 240DL perfectly.”
Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach
from $9.99
(3)
Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach
“Good tool. Deep socket.”
Distributor Rotor
from $10.05
(2)
Distributor Rotor
“It fit. The buggy runs better with a new ignition system.”