1978 Toyota Land Cruiser Drivetrains
More 1978 Toyota Land Cruiser Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1978 Toyota Land Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1978 Toyota Land Cruiser Drivetrains
Yukon Gear – 12 Hole Yoke For ’83 And Newer Toyota 8" And V6 With 27 Splines (Part No.41105)
from
$109.99
Yukon 12 hole yoke for ’83 and newer Toyota 8″ and V6 with 27 splines. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and V6
- 27 spline
- Round companion flange
Yukon Gear – Pinion Install Kit For Toyota Landcruiser Differential (Part No.13091)
from
$274.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota Landcruiser
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
USA Standard Gear – Ring & Pinion Gear Set For Toyota Landcruiser In A 4.11 Ratio (Part No.36256)
from
$564.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits Toyota 9.5″ Landcruiser
- 9.50″ ring gear diameter
- 27 spline pinion
- 10 ring gear bolts
- 4.11 ratio
Yukon Gear – Pinion Nut (Part No.33156)
from
$5.99
Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.
Product Features:
See More
Product Features:
- Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
- 20mm x 1.5 thread
- 30mm socket
Yukon Gear – Grizzly Locker For Toyota Landcruiser, 30 Spline (Part No.28032)
from
$1099.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts.
Product Features:
See More
Product Features:
- Fits Toyota 9.5″ Landcruiser with 30 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – Toyota Landcruiser Crush Sleeve (Part No.33114)
from
$34.99
Toyota Landcruiser crush sleeve. Approx 2.220″ long.
Product Features:
See More
Product Features:
- Crush sleeve
- Fits Toyota Landcruiser
- 2.220″ tall
Corteco – Axle Seal (Part No.K4021473844CFW)
from
$8.51
Axle Seal
Yukon Gear – Yoke For ’69 To ’78 Toyota Landcruiser With 27 Spline Pinion (Part No.41109)
from
$129.99
Yukon yoke for ’69 to ’78 Toyota Landcruiser with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1969-1978 Toyota Landcruiser
- 27 spline
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)
from
$35.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Bearing Race Driver (Part No.56005)
from
$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30306 race
- All steel construction
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – Landcruiser Standard Open Pinion Gear Thrust Washer (Part No.33394)
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Driveworks – Oil Seal (Part No.S-1177)
from
$9.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Spartan Locker For Toyota 95" Landcruiser With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17033)
from
$603.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Toyota 9.5″ Landcruiser with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Milemarker – Hub Conversion Kit (Part No.95-29918)
National – Bearings (Part No.30307)
from
$50.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Bearing Install Kit For ’90 & Older Toyota Landcruiser Differential (Part No.11090)
from
$364.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits 1990 and down Toyota Landcruiser
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
National – Multi Purpose Seal (Part No.710596)
from
$10.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.KC-11445-Y)
from
$62.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
USA Standard Gear – Master Overhaul Kit For ’90 & Old Toyota Landcruiser (Part No.37082)
from
$358.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 1990 and down Toyota Landcruiser
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
Yukon Gear – Ring Gear Bolt Kit For Toyota Landcruiser (Part No.12075)
from
$192.99
Ring gear bolt kit for Toyota Landcruiser.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota Landcruiser
- Included are ring gear bolts and nuts
Yukon Gear – Landcruiser Standard Open Cross Pin Shaft (Part No.33419)
Yukon Gear – Toyota Landcruiser Ring Gear Bolt & Nut Kit (Part No.33200)
from
$22.99
Product Features:
See More
- Ring gear bolt and nut kit
- Fits Toyota Landcruiser
- Includes one bolt and one nut
Popular 1978 Toyota Land Cruiser Drivetrains Categories
1978 Toyota Land Cruiser Drivetrains
You count on your 1978 Toyota Land Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 58 Drivetrains ranging in price from $5.49 to $1,099.99, you’re sure to find everything you need for your 1978 Toyota Land Cruiser.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 11 different brands like Valvoline, National, and Yukon Gear. 1978 Toyota Land Cruiser Drivetrains start as low as $5.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 459 extensive product reviews on 1978 Toyota Land Cruiser Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 2.5 stars and Bearings with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1978 Toyota Land Cruiser below to get started!
Top-Rated Drivetrains Brands For Your 1978 Toyota Land Cruiser
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Toyota Land Cruiser running right for years to come. In our inventory you’ll find brands like Valvoline, National, Yukon Gear, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1978 Toyota Land Cruiser back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1978 Toyota Land Cruiser Drivetrains
What are the most purchased Drivetrains for the 1978 Toyota Land Cruiser?
Out of 58 Drivetrains for the 1978 Toyota Land Cruiser, the most popular in our inventory are:
