1978 Porsche 911 Cooling and Climate Controls
More 1978 Porsche 911 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1978 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1978 Porsche 911 Cooling and Climate Controls
Original Equipment – Heater Cable (Part No.R3048669078OEA)
from
$21.92
Heater Cable
Mahle – Oil Thermostat (Part No.A633097561MAH)
from
$514.77
Oil Thermostat
Autopart International Inc – Blower Motor (Part No.R20311984364API)
from
$63.95
Blower Motor
Dansk – Heater Valve (Part No.R302022615DSK)
from
$395.26
Heater Valve
Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA2297)
from
$315.99
Engine Coolant Temperature Sender
Original Equipment – Heater Blower Hose (Part No.H1015399678OEA)
from
$43.82
Heater Blower Hose
National – Bearings (Part No.5001-KFF)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Original Equipment – Heater Control Swive (Part No.R3075947699OEA)
from
$2.60
Heater Control Swive
KAI – A/C Receiver Drier (Part No.ACM010160)
from
$15.99
New Standard Replacement A/C Receiver Drier
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Elring – Water Pump Gasket (Part No.G3040160843ELR)
from
$15.88
Water Pump Gasket
Original Equipment – Heater Valve Cable (Part No.R201754110OEA)
from
$23.79
Heater Valve Cable
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
APA/URO – A/C Expansion Valve (Part No.R104560355APA)
from
$36.51
The APA/URO A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application.
- Meet or exceed OEM specifications.
- Utilizes the factory style fittings and connectors
- Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Carbon Shaft Seal Kit (Part No.24021)
from
$26.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)
from
$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
URO Parts – Water Temperature Sensor (Part No.LNA1600AA)
from
$8.99
URO Parts has been a leading brand of replacement auto parts for European vehicles for more than thirty years. Affordable yet dedicated to quality, URO Parts controls its production process in strict accordance with ISO/TS 16949 QMS specifications and offers a wide variety of components used to restore or repair engine, electrical, drive train, braking, steering, suspension, climate control, cooling, exhaust, and fuel systems in classic to late-model German, British, and Scandinavian vehicles. Looking for parts that are even higher quality than original equipment? URO Parts engineers analyze common failures and identify weaknesses in original equipment parts when creating URO Premium components, which are superior to OE in performance and reliability thanks to improved materials and more robust designs. Thanks to high-quality, competitively-priced URO Parts and bulletproof URO Premium replacement components, owning a prestigious European vehicle is no longer an expensive luxury reserved for the elite and wealthy.
Product Features:
See More
Product Features:
- Guaranteed fitment
- Direct-fit OE replacement design restores proper factory cooling fan sensor function
- Easy plug-and-play connection
- Manufactured using high-quality materials to withstand intense engine compartment and cooling system heat
- Alloy conductors minimize electrical resistance for accurate operation
- Designed and tested for reliability and long life
Nissens – A/C Compressor w/ Clutch, New (Part No.R1000660875NSS)
from
$710.96
Maximum performance and durability in climate powering Nissens compressors are high-quality products that are designed and manufactured according to the highest quality and OE standards. The products are thoroughly tested in Nissens advanced test center to ensure maximum compression performance, long durability and a minimum of noise. Furthermore, the optimal design of Nissens compressors guarantees an ideal fit on the vehicle, permitting a smooth and easy installation process. Why opt for Nissens compressors?
Product Features:
See More
Product Features:
- Maximum performance and durability in climate powering
- Excellent quality designed and manufactured to match the OE standards 100%
- Perfect finish of all components snap rings, bearings, pistons, scrolls, valves/shaft, swash plate/clutch
- Unique reliability thorough durability and performance tests: real life test and sterile test series
- Minimized noise and vibration level
- Perfect fit and easy installation
- User-friendly installation guide included in the product warranty brochure
- Well-packed products ensuring protection from transport damage First fit on Nissens compressors
- Pre-filled with the right type of PAG lubricant offering the right viscosity and amount
- Equipped with O-rings
- Equipped with electrical adaptors (Multi Fit applications)
- Equipped with pre-filters (whenever needed)
Carquest Premium – New Compressor (Part No.T98316)
from
$778.99
Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Every unit is 100% function and leak tested
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
- Very low friction coating used on swash plate to improve durability
- PTFE coated pistons improve performance and reduce wear
- Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
- Matched high-quality needle-roller bearing ensures low friction and high load capability
- Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
Carquest Standard – Reman Nippondenso 7SB16C Compressor w/ Clutch (Part No.DW77313)
from
$369.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Ranco – Air Conditioning Temperature Switch (Part No.R1055132743RAN)
from
$81.77
Air Conditioning Temperature Switch
Popular 1978 Porsche 911 Cooling and Climate Controls Categories
1978 Porsche 911 Cooling and Climate Controls
You count on your 1978 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 32 Cooling and Climate Controls ranging in price from $0.99 to $621.70, you’re sure to find everything you need for your 1978 Porsche 911.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 13 different brands like Permatex, Factory Air, and Dorman. 1978 Porsche 911 Cooling and Climate Controls start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 406 extensive product reviews on 1978 Porsche 911 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are A/C Filter Drier with 3.7 stars and Bearings with 2.3 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1978 Porsche 911 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1978 Porsche 911
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Porsche 911 running right for years to come. In our inventory you’ll find brands like Permatex, Factory Air, Dorman, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1978 Porsche 911 back on the road. Some of the top-rated Permatex products in these categories are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1978 Porsche 911, and some of our most reviewed parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
FAQs for 1978 Porsche 911 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1978 Porsche 911?
Out of 32 Cooling and Climate Controls for the 1978 Porsche 911, the most popular in our inventory are:
What are the top-rated 1978 Porsche 911 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1978 Porsche 911 based on customer reviews/ratings are:
from
$17.99
(3)
Bearings
“This bearing was a perfect fit for use with the intermediate drive shaft on a 2009 Chev. Malibu with 2.4L engine and 6-spd. auto trans. (LE5 with MH8)”
