1978 Mercury Grand Marquis Differentials

Essential 1978 Mercury Grand Marquis Differentials

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM102910 Differential (Part No.37033)

Master Overhaul Kit for the Ford 9" LM102910 Differential

from

$221.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 9″ with LM102910 carrier race
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Chrome Cover For 8.8" Ford (Part No.32009)

Chrome Cover For 8.8" Ford

from

$74.99
Chrome cover for 8.8″ Ford.

Product Features:
  • Fits Ford 8.8″
  • Chrome
See More

USA Standard Gear – Ring & Pinion Gear Set For Ford 9" In A 3.70 Ratio (Part No.36137)

Ring & Pinion Gear Set For Ford 9" In A 3.70 Ratio

from

$319.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Ford 9″
  • 9.00″ ring gear diameter
  • 28 spline pinion
  • 10 ring gear bolts
  • 3.70 ratio
See More

Yukon Gear – O-Ring For 9" Ford (Part No.30028)

O-Ring For 9" Ford

from

$14.99
O-ring for 9″ Ford.Yukon Mighty seal.

Product Features:
  • Pinion support o-ring
  • Fits Ford 9″
See More

Yukon Gear – Tracloc Clutch Set (Two Sides) For 7.5" Ford (Part No.16013)

Tracloc Clutch Set (Two Sides) For 7.5" Ford

from

$264.99
TracLoc clutch set (two sides) for 7.5″ Ford.

Product Features:
  • Clutch kit
  • Fit Ford 7.5″ Trac Loc positraction
See More

Yukon Gear – Standard Open & Tracloc Pinion Gear And Thrust Washer For 7.5" Ford (Part No.33296)

Standard Open & Tracloc Pinion Gear And Thrust Washer For 7.5" Ford

from

$10.99
Standard Open & TracLoc pinion gear thrust washer for 7.5″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 7.5″
See More

Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)

Trac Loc Spring Plate For Ford 9" & 8"

from

$10.99
Product Features:
  • Trac Loc spring plate for Ford 8″ and 9″
See More

Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Street Design (Part No.26010)

Trac Loc For Ford 9" Wtih 31 Spline Axles - Street Design

from

$789.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Street design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Pinion Nut (Part No.33154)

Pinion Nut

from

$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:
  • Pinion nut for Ford 7.5″, 8″ and 9″
  • 3/4″ x 20 thread
  • 1 1/6″ socket
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
  • Quality materials – all components are built for reliable longevity and performance
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)

Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Ford 8" & 9" Tracloc Ring Gear Bolt (Part No.33044)

Ford 8" & 9" Tracloc Ring Gear Bolt

from

$4.99
Ford 8″ & 9″ TracLoc ring gear bolt, 1-1/4″ long.

Product Features:
  • Ring gear bolt for Ford 8″ and 9″
  • For use with Trac Loc limited slip
  • 1.25″ long
See More

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Trac Loc Clutch Guide For 9" Ford

from

$4.99
Trac Loc clutch guide for 9″ Ford.

Product Features:
  • Clutch guide
  • Fits Ford 8″ and 9″
See More

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford

from

$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 9″
  • 3/8″ x 24 thread
  • 1.5″ long
See More

Motive Gear – Differential Gear Install Kit (Part No.F9IKN)

Differential Gear Install Kit

from

$46.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od) (Part No.41045)

Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od)

from

$314.99
Yukon flange yoke for Ford 7.5″ passenger and truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 7.5″
  • 28 spline
  • Round companion flange
  • 4.3″ O.D.
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R9R325)

Differential Bearing Kit - Koyo

from

$117.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • 9″ BEARING KIT FOR 3.25 HOUSING
See More

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$41.99
Product Features:
  • Shim kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
See More

Yukon Gear – Standard Open Carrier Case, Ford 8.8", 28 Spline (Part No.20076)

Standard Open Carrier Case, Ford 8.8", 28 Spline

from

$379.99
8.8″ 28 spline standard Open bare case (incl REVERSE) 3/4″ cross pin Hole.

Product Features:
  • Standard open carrier case
  • Does not include spider gears
  • Fits Ford 8.8″ with 28 spline axles
  • 3/4″ cross pin bore
See More

Pro-King – Differential Cover Gasket (Part No.762B303)

Differential Cover Gasket

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Differential Carrier Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Spartan – Drive Axle Assembly; Ford 98-02 Lockup Axle (Part No.RAXP1917AC)

Drive Axle Assembly; Ford 98-02 Lockup Axle

from

$1993.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Motive Gear – Differential Mini Spool (Part No.MS88-31)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL 8.8 FORD 31SPL
See More

National – Shaft Repair Sleeve (Part No.99181)

Shaft Repair Sleeve

from

$37.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Pilot Bearing For Ford 9" (Part No.18042)

Pilot Bearing For Ford 9"

from

$38.99
8.6″ GM 99-08 PINION Bearing & SEAL KIT .

Product Features:
  • Pilot bearing
  • Fits Ford 9″
  • 0.656″ thick
See More

Popular 1978 Mercury Grand Marquis Differentials Categories

1978 Mercury Grand Marquis Differentials

Maybe you’re in the middle of a full rebuild of that 1978 Mercury Grand Marquis. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 378 different Differentials in our inventory ranging from $1.99 to $1,211.99. That means you can find the exact parts or products you need to keep that 1978 Mercury Grand Marquis running smoothly.

Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Mercury Grand Marquis. National, Yukon Gear, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1978 Mercury Grand Marquis, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 186 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Multi Purpose Seal with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1978 Mercury Grand Marquis rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1978 Mercury Grand Marquis Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Mercury Grand Marquis demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Marquis the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1978 Mercury Grand Marquis, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

Top 1978 Mercury Grand Marquis Differentials from National

National products are another trusted brand when it comes to Differentials for your 1978 Mercury Grand Marquis. Popular National parts include:
Multi Purpose Seal
from $11.99
(28)
Multi Purpose Seal
Differential Pinion Seals
Bearings
from $15.99
(9)
Bearings
Front Differential Pinion Bearings
Bearings
from $6.99
(6)
Bearings
Differential Bearings

FAQs for 1978 Mercury Grand Marquis Differentials

What are the most purchased Differentials for the 1978 Mercury Grand Marquis?

Out of 378 Differentials for the 1978 Mercury Grand Marquis, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Oil Seal
from $4.79
(1)
Oil Seal
Differential Pinion Seals
Cover Bolt For Ford 7.5", 8.8" & 9.75"
from $6.99
This product is not rated
Cover Bolt For Ford 7.5", 8.8" & 9.75"
Differential Cover Bolts

What are the top-rated 1978 Mercury Grand Marquis Differentials?

Top-rated Differentials for your 1978 Mercury Grand Marquis based on customer reviews/ratings are:
Bearings
from $10.49
(4)
Bearings
“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
Multi Purpose Seal
from $15.79
(3)
Multi Purpose Seal
“good quality”
Shaft Repair Sleeve
from $37.99
(1)
Shaft Repair Sleeve
“Very delicate piece, but came shipped quite safely and not damaged. High quality.”