1978 Mercedes-Benz 280CE Belts and Hoses
More 1978 Mercedes-Benz 280CE Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1978 Mercedes-Benz 280CE, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1978 Mercedes-Benz 280CE Belts and Hoses
CRP – Vacuum Hose (Part No.B202073221CRP)
from
$36.35
Vacuum Hose
Rein – Vacuum Hose (Part No.B202073183RIN)
from
$4.42
Vacuum Hose
Cohline – Vacuum Hose, 3.5mm x 9mm (Part No.B202012368COH)
from
$7.97
Vacuum Hose, 3.5mm x 9mm
Gates – Automotive XL« High Capacity V-Belt (Part No.7385)
from
$26.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Bando – Precision Engineered V-Belt (Part No.W100046033BAN)
from
$20.42
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.
Product Features:
See More
Product Features:
- Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
- Precision molded teeth are protected by durable fabric facing for long life
- Tensile cord is engineered and tested for maximum load carrying capabilities
- Rubber backing resists abrasion, oil and heat
ContiTech – Drive Belt (Part No.W100014861CON)
from
$10.34
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Polyester fiber tensile members and a ribbed belt design.
INA – Air Conditioning Idler Pulley (Part No.R108125327INA)
from
$94.45
Air Conditioning Idler Pulley
Cohline – Fuel Hose, per Meter (Part No.E5000106278COH)
from
$8.76
Fuel Hose, per Meter
CRP – Hose – Fuel (Part No.4L30010809CRP)
from
$233.30
Hose – Fuel
Cohline – Fuel Hose (Part No.E500016123COH)
from
$26.99
Fuel Hose
Cohline – Fuel Hose (Part No.E500016122COH)
from
$25.90
Fuel Hose
Rein – AT Cooling Hose (Part No.J200035198RIN)
from
$23.44
AT Cooling Hose
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.25" Diameter (Part No.B70748)
from
$19.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
APA/URO Parts – Overflow Hose (Part No.G2005163696APA)
from
$6.88
Overflow Hose
Gates – Premium Molded Coolant Hose (Part No.20701)
from
$27.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Vulco« Straight Coolant Hose (Part No.24028)
from
$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
Product Features:
See More
Product Features:
- Heat-resistant cover
- Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
- Meets SAE 20R1 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance free connection, use PowerGrip SB clamps
- Caution: Do not use for fuel or oil transfer applications
Popular 1978 Mercedes-Benz 280CE Belts and Hoses Categories
1978 Mercedes-Benz 280CE Belts and Hoses
You count on your 1978 Mercedes-Benz 280CE to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 36 Belts and Hoses ranging in price from $1.99 to $486.90, you’re sure to find everything you need for your 1978 Mercedes-Benz 280CE.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 11 different brands like Dayco, Rein, and CRP. 1978 Mercedes-Benz 280CE Belts and Hoses start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 11 extensive product reviews on 1978 Mercedes-Benz 280CE Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Automotive V-Belt with 4.0 stars.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1978 Mercedes-Benz 280CE below to get started!
Top-Rated Belts and Hoses Brands For Your 1978 Mercedes-Benz 280CE
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Mercedes-Benz 280CE running right for years to come. In our inventory you’ll find brands like Dayco, Rein, CRP, and even more.
Popular Dayco Belts and Hoses
You’ll find popular Dayco brand products across Serpentine and V Belts. All are waiting to get your 1978 Mercedes-Benz 280CE back on the road. Some of the top-rated Dayco products in these categories are:
from
$19.79
(1)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.25" Diameter
Upper Radiator Hoses
FAQs for 1978 Mercedes-Benz 280CE Belts and Hoses
What are the most purchased Belts and Hoses for the 1978 Mercedes-Benz 280CE?
Out of 36 Belts and Hoses for the 1978 Mercedes-Benz 280CE, the most popular in our inventory are:
from
$18.79
This product is not rated
Bottom Cog V-Belt; 50.5 Inch Long, Exact Fit Premium Quality
V-Belts
What are the top-rated 1978 Mercedes-Benz 280CE Belts and Hoses?
Top-rated Belts and Hoses for your 1978 Mercedes-Benz 280CE based on customer reviews/ratings are:
