1978 Jaguar XJ6 Steering and Chassis Parts
More 1978 Jaguar XJ6 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1978 Jaguar XJ6, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1978 Jaguar XJ6 Steering and Chassis Parts
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Return Hose Assembly (Part No.40074)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Rare Parts – Tie Rod End (Part No.RP28993)
from
$74.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MOOG – Steering Tie Rod End (Part No.ES3244)
from
$39.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Lemfoerder – OE Replacement Ball Joint (Part No.L202037407LEM)
from
$86.12
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
APA/URO Parts – Steering Rack Mount (Part No.M106037373APA)
from
$6.81
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Steel outer – neoprene inner – with steel center sleeve (as OE original) C29406 Washer May Also be Required
See More
Powercraft – Pump Complete Rebuild Kit (Part No.8630)
from
$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)
from
$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
MTC – Subframe Mount (Part No.L100586463MTC)
from
$24.15
The MTC Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
MTC – Subframe Mount (Part No.L100541441MTC)
from
$17.10
The MTC Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Maval – Power Steering Pump, Remanufactured (Part No.M2010384838MAV)
from
$206.47
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.
Product Features:
See More
Product Features:
- OEM-Quality and Direct Fit replacement
- Components are inspected and cleaned of rust and corrosion.
- Shaft and internal surfaces are inspected, reconditioned and polished.
- Seals and O-rings are replaced with new, OE-equivalent parts.
- Assembled units are 100% functionally tested for leaks and performance.
Cardone – Power Steering Pump (Part No.21-5210)
from
$175.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Powercraft – Pump Seal Kit (Part No.8834)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8631)
from
$14.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Pressure Hose Assembly (Part No.36325)
from
$103.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Hose Assembly (Part No.36214)
from
$82.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Line Hose Assembly (Part No.37937)
from
$76.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Beck/Arnley – Steering Rack Boot Kit (Part No.103-2734)
from
$31.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
Rare Parts – Rack & Pinion Bellows (Part No.RP28463)
from
$29.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Popular 1978 Jaguar XJ6 Steering and Chassis Parts Categories
1978 Jaguar XJ6 Steering and Chassis Parts
You count on your 1978 Jaguar XJ6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 27 Steering and Chassis Parts ranging in price from $2.99 to $111.99, you’re sure to find everything you need for your 1978 Jaguar XJ6.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Carquest Premium, Powercraft, and Cardone. 1978 Jaguar XJ6 Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 96 extensive product reviews on 1978 Jaguar XJ6 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Subframe Mount with 4.3 stars and Bulk – 3/8" I.D. Return Hose J189 with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1978 Jaguar XJ6 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1978 Jaguar XJ6
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Jaguar XJ6 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Powercraft, Cardone, and even more.
Popular Cardone Steering and Chassis Parts
You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 1978 Jaguar XJ6 back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Powercraft Steering and Chassis Parts
If Powercraft are what you’re looking for, our inventory holds plenty. We stock Powercraft brand Steering and Chassis Parts for your 1978 Jaguar XJ6, and some of our most reviewed Powercraft parts include:
FAQs for 1978 Jaguar XJ6 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1978 Jaguar XJ6?
Out of 27 Steering and Chassis Parts for the 1978 Jaguar XJ6, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 1978 Jaguar XJ6 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1978 Jaguar XJ6 based on customer reviews/ratings are:
from
$24.15
(3)
Subframe Mount
“I bought one of these back in 2014 for my 2013 ZL1 and I still love it, it really makes the cars supercharger sound really aggressive when you add a l”
