1978 Honda Accord Brake Parts
More 1978 Honda Accord Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1978 Honda Accord, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1978 Honda Accord Brake Parts
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2710)
from
$309.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2753)
from
$112.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Cardone – Vacuum Brake Booster: Without Master Cylinder (Part No.53-6606)
from
$174.99
Our remanufactured Power Brake Boosters are built to match original performance standards. Every unit is completely disassembled, cleaned, inspected and renewed with O.E.-quality components. Reverse engineering provides insight into why the unit failed, often resulting in an improved product. All units are 100% tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5436)
from
$147.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-4939)
from
$100.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Carquest Wearever – Disc Brake Hardware Kit (Part No.H4755)
from
$2.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA351768)
from
$9.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA351556)
from
$8.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA35895)
from
$5.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 20.7 mm Bore (Part No.MCA630422)
from
$134.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Wearever – Remanufactured Brake Master Cylinder (Part No.11-2518)
from
$50.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
- Plastic reservoirs are 100% vacuum-tested to ensure proper function
Wearever – Remanufactured Brake Master Cylinder (Part No.11-2870)
from
$61.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – Brake Master Cylinder MCA39882: New, With Reservoir (Part No.MCA39882)
from
$79.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore (Part No.MCA630604)
from
$146.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 0.938" Bore (Part No.MCA390417)
from
$109.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Carquest Wearever – Brake Master Cylinder MCA39970: New, With Reservoir (Part No.MCA39970)
from
$79.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
Product Features:
See More
Product Features:
- All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
- Key components like spring are from high and stable quality suppliers.
- Products are machined by CNC machines with strictly quality control.
- Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
- Direct replacement for a proper fit
- Manufactured to strict engineering quality standards, meets S.A.E. specifications
- Each product is 100% tested on production lines and sampling tested prior to shipment
- Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.026 mm
- Main cylinder hole of measured by the 0.022 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore (Part No.MCA39426)
from
$57.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Wearever – Remanufactured Brake Master Cylinder (Part No.11-3089)
from
$62.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Premium Gold – Ceramic Brake Pads – Front (4-Pad Set) (Part No.GNAD1608)
from
$54.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD1506)
from
$38.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Premium Gold – Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking (Part No.GNAD273)
from
$42.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications, provides better value and
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-465)
from
$41.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
Carquest Premium Gold – Ceramic Brake Pads – Front (4-Pad Set) (Part No.GNAD1832)
from
$49.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific formulations designed for extended pad life and clean wheels
- Multi-layer shim for near silent braking
- OE designed slots and chamfers for consistent performance
- Hardware included on popular and late-model applications
PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-1506)
from
$51.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
Akebono ProAct – Ultra Premium Ceramic Brake Pads (Part No.ACT465)
from
$67.99
Akebono Pro-ACT Ultra-Premium brake pads utilize OE-validated, application-specific friction formulations. This helps ensure that Pro-ACT Ultra-Premium brake pads will provide a reliable braking experience. With the Akebono Pro-ACT Ultra-Premium product line, all customers will receive OE-quality replacements for many popular domestic and Japanese vehicles.
Product Features:
See More
Product Features:
- Virtually Eliminates Noise, Vibration and Harshness (NVH)
- Vehicle-Optimized Ceramic Formulas for Superior Performance
- Unrivaled Stopping Power
- Clean Wheels
- No Break-in Required
- Rotor Friendly for Longest Rotor Life
- Perfect Upgrade for all Braking Systems
Akebono ProAct – Ultra Premium Ceramic Brake Pads (Part No.ACT787)
from
$67.99
Akebono Pro-ACT Ultra-Premium brake pads utilize OE-validated, application-specific friction formulations. This helps ensure that Pro-ACT Ultra-Premium brake pads will provide a reliable braking experience. With the Akebono Pro-ACT Ultra-Premium product line, all customers will receive OE-quality replacements for many popular domestic and Japanese vehicles.
Product Features:
See More
Product Features:
- Virtually Eliminates Noise, Vibration and Harshness (NVH)
- Vehicle-Optimized Ceramic Formulas for Superior Performance
- Unrivaled Stopping Power
- Clean Wheels
- No Break-in Required
- Rotor Friendly for Longest Rotor Life
- Perfect Upgrade for all Braking Systems
Wagner – ThermoQuiet Ceramic Disc Brake Pad Set (Part No.QC503)
from
$35.00
Wagner TQ® brake pads feature a zero-copper friction formulation and a unique Integrally Molded Insulator (IMI™) technology for quieter operation.
Product Features:
See More
Product Features:
- QUIETER OPERATION — Application-specific design and a unique laser-shaped friction spreads out heat, sound and vibration to reduce noise opportunities
- LONG LIFE — Superior formulation design dissipates heat for long-lasting friction performance and reduced brake fade
- CLEANER WHEELS — Proprietary formulation provides superior braking performance and reduced rotor wear, helping to cut down on brake dust
- ONE-PIECE DESIGN — IMI™ technology integrates friction material, backing plate and insulator into the brake pad for select applications
- HARDWARE INCLUDED — Premium stainless-steel hardware included for select applications
- COMPREHENSIVE COVERAGE — Brake pads available for most vehicles on the road
- ZERO COPPER FORMULATION — Features Wagner OE25™ zero-copper friction formulation
Popular 1978 Honda Accord Brake Parts Categories
1978 Honda Accord Brake Parts
You count on your 1978 Honda Accord to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 6 Brake Parts ranging in price from $2.99 to $99.99, you’re sure to find everything you need for your 1978 Honda Accord.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 3 different brands like Cardone, Carquest, and Wearever. 1978 Honda Accord Brake Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 20 extensive product reviews on 1978 Honda Accord Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1978 Honda Accord below to get started!
Top-Rated Brake Parts Brands For Your 1978 Honda Accord
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Honda Accord running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Wearever, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1978 Honda Accord back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1978 Honda Accord Brake Parts
What are the most purchased Brake Parts for the 1978 Honda Accord?
Out of 6 Brake Parts for the 1978 Honda Accord, the most popular in our inventory are:
from
$99.99
This product is not rated
Vacuum Brake Booster: Without Master Cylinder
Power Brake Boosters
