1978 GMC Jimmy Wheels and Tires
More 1978 GMC Jimmy Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1978 GMC Jimmy, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1978 GMC Jimmy Wheels and Tires
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)
from
$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
National – Multi Purpose Seal (Part No.8871)
from
$5.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
SKF – Wheel Seal (Part No.K8010333922SKF)
from
$4.95
Wheel Seal
Dorman – Spindle Dust Cap 2-3/32 In. Diameter (sold by each) (Part No.618-102)
from
$2.49
This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mr. Gasket – Dust Cap (Part No.2485)
from
$11.99
Add a finished look. Heavy chrome plated. Easy installation. 2 piece set.
Product Features:
See More
Product Features:
- Add a finished look
- Heavy chrome plated
- Easy installation
- 2 per set
National – Bearings (Part No.109)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Wheel Hub Assembly (Part No.NT513061)
from
$104.99
Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- Integral raceway provides proper clearance between the roller and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Broad range of designs and custom-tailored to specific applications and operating conditions
- ABS Components and Bearing Preload 100% Tested To OE Specs
- Premium seals, both inboard and outboard, protect the bearing
- Brand may vary by location
COAST TO COAST – Two Open Style Caps, Chrome Plated, Abs Plastic, Bolt-On, Set Of 4 (Part No.IWCC2040)
from
$139.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
Dorman – Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Acorn, 1.385" Length, Chrome, 1 Pack (Part No.611-153.1)
from
$2.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: 1/2-20 Thread, Flanged, Cragar SST Mag, 2.25" Length, Chrome, 4 Pack (Part No.711-202)
from
$24.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Autopart International Inc – Wheel Seal (Part No.K80102008285API)
from
$7.85
Wheel Seal
National – Multi Purpose Seal (Part No.8660S)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
McGard – Cone Seat- Under Hub Cap Wheel Lock Set (7/16"-20 Thread Size) – Set of 4 Locks and 1 Key (Part No.24011)
from
$29.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use under wheel covers, center caps and hub caps.
- Can also be used for exposed applications with optional (70005) black or (70006) chrome caps.
Dorman – Wheel Lug Nut & Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.392" L, Blue, 16 Nuts/4 Locks/1 Key (Part No.711-235D)
from
$59.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
COAST TO COAST – Chrome Plated With 4X4 Logo On 4, Aluminum, Set Of 4 (Part No.IWCC2040R)
from
$129.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
Dorman – Wheel Stud: Serrated, 1/2-20 Thread Size, Right Hand Thread (Sold by each) (Part No.610-159)
from
$2.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread, 40 Pack (Part No.610-254.40)
from
$72.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
McGard – Chrome Bulge Style Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.5 Thread Size) (Part No.84537)
from
$129.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
McGard – Black Bulge Cone Seat Wheel Installation Kit for 5 Lug Vehicles (1/2"-20 Thread Size) (Part No.84551)
from
$134.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
Dorman – Wheel Lug Nut Lock Set, Chrome, Type – Acorn, Thread Size – 1/2" – 20 (Part No.711-543)
from
$42.39
Wheel Lug Nut Lock Set, Chrome, Type – Acorn, Thread Size – 1/2" – 20
McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.65357)
from
$29.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65100 Or 65300 Installation Tool sold separately
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome, 1 Pack (Part No.611-182.1)
from
$2.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut M12-1.50 External Thread – 19mm Hex, 27.5mm Length (Part No.611-109)
from
$2.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly (Part No.513200)
from
$227.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Innovative roll form design ensures consistent and optimal preload.
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG® hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT513124HD)
from
$44.49
WJB Automotive heavy-duty line of wheel hub assemblies use an enhanced design from the standard line to maximize durability and performance. Heavy duty and roll-formed wheel hub assemblies are manufactured under rigorously controlled manufacturing processes with high-quality raw materials to ensure optimal strength and preload.
Product Features:
See More
Product Features:
- Zero-gap Roll Forming Technology ensures greater strength and security through minimizing any play in the hub.
- Optimal ABS sensor and sealing design ensures sealing performance, reduces seal failure, and maximizes dirt and contaminant resistance.
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Brand may vary by location
Popular 1978 GMC Jimmy Wheels and Tires Categories
1978 GMC Jimmy Wheels and Tires
You count on your 1978 GMC Jimmy to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 136 Wheels and Tires ranging in price from $1.79 to $869.99, you’re sure to find everything you need for your 1978 GMC Jimmy.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 7 different brands like Dorman, Schrader, and National. 1978 GMC Jimmy Wheels and Tires start as low as $1.79!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 1,212 extensive product reviews on 1978 GMC Jimmy Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.2 stars and Cylindrical Bearing with 4.3 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1978 GMC Jimmy below to get started!
Top-Rated Wheels and Tires Brands For Your 1978 GMC Jimmy
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 GMC Jimmy running right for years to come. In our inventory you’ll find brands like Dorman, Schrader, National, and even more.
Popular Driveworks Wheels and Tires
You’ll find popular Driveworks brand products across Wheel Bearings. All are waiting to get your 1978 GMC Jimmy back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Dorman Wheels and Tires
If Dorman are what you’re looking for, our inventory holds plenty. We stock Dorman brand Wheels and Tires for your 1978 GMC Jimmy, and some of our most reviewed Dorman parts include:
from
$38.49
(29)
Wheel Lug Nut & Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.407" L, Chrome, 16 Nuts/4 Locks/1 Key
Custom Wheel Lug Nut and Lock Sets
from
$40.49
(23)
Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key
Custom Wheel Lug nuts
from
$16.29
(17)
Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.425" Length, Chrome, 4 Locks/1 Key
Locking Wheel Lug Nuts
FAQs for 1978 GMC Jimmy Wheels and Tires
What are the most purchased Wheels and Tires for the 1978 GMC Jimmy?
Out of 136 Wheels and Tires for the 1978 GMC Jimmy, the most popular in our inventory are:
from
$2.49
This product is not rated
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Acorn, 1.38" Length, Chrome (Sold by each)
Custom Wheel Lug nuts
from
$2.49
This product is not rated
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Open End, 0.83" Length, Chrome (Sold by each)
Custom Wheel Lug nuts
from
$1.79
This product is not rated
Wheel Nut 7/16-20 Standard – 3/4 In. Hex, 9/16 In. Length
Wheel Lug Nuts
What are the top-rated 1978 GMC Jimmy Wheels and Tires?
Top-rated Wheels and Tires for your 1978 GMC Jimmy based on customer reviews/ratings are:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“For tracking the tire pressure on my Ford F-150.”
