1978 GMC C35 Bodies and Fender Parts

More 1978 GMC C35 Bodies and Fender Parts

Find your specific 1978 GMC C35 original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1978 GMC C35 Bodies and Fender Parts

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$59.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – B-Pillar/Rocker Panel (Part No.RRP103)

B-Pillar/Rocker Panel

from

$44.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Roll Pan (Part No.EFXRP15)

Roll Pan

from

$189.99
New ProEFX Rear Roll Pan With License Plate, Fleetside

Product Features:
  • Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Front Passenger Side Wheel Opening Molding, Made Of Steel (Part No.GM1291102)

Front Passenger Side Wheel Opening Molding, Made Of Steel

from

$29.99
New Standard Replacement Front Passenger Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender Extension Panel (Part No.RRP114)

Fender Extension Panel

from

$24.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender (Part No.GM1241122)

Fender

from

$409.99
New Standard Replacement Passenger Side Fender

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP147)

Floor Pan

from

$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29

Product Features:
  • Front Section, 22 1/4 X 29, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender Brace (Part No.GMK4144662731)

Fender Brace

from

$21.99
New Goodmark Rear Fender Center Brace, For Stepside Models, 4 Required, Made Of Steel

Product Features:
  • For Stepside Models 4 Required Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Rocker Panel (Part No.RRP702)

Rocker Panel

from

$18.99
New Standard Replacement Driver Or Passenger Side Rear Rocker Panel, Crew Cab, 46 3/42 X 11 3/4

Product Features:
  • Crew Cab, 46 3/42 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.GMK414451073L)

Floor Pan

from

$54.99
New Goodmark Driver Side Rear Outer Cab Floor, Truck Side Of Front Seat

Product Features:
  • Truck Side Of Front Seat
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Wheel Arch Panel (Part No.RRP113)

Wheel Arch Panel

from

$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Powder Coated, Black, Steel (Part No.DZ3700301)

With Step Pads, 3" Round Bent/ 32" L, Powder Coated, Black, Steel

from

$411.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Required
  • 1 Pad On The Bar
  • Frame Mounted For Maximum Strength
  • Powder Coated Steel Braces Resist Rust
  • Powder Coated Steel Braces Resist Rust
  • Molded Plastic Step Pads For Secure Footing
  • Fit Most Full And Mid Size Pickups
See More
View Product

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)

With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps

from

$661.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Required
  • 1 Pad On The Bar
  • Frame Mounted For Maximum Strength
  • Powder Coated Steel Braces Resist Rust
  • Powder Coated Steel Braces Resist Rust
  • Molded Plastic Step Pads For Secure Footing
  • Fit Most Full And Mid Size Pickups
See More
View Product

Energy Suspension – Body Cab Mount Set (Part No.3.4140G)

Body Cab Mount Set

from

$144.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

Energy Suspension – Body Cab Mount Set (Part No.3.4103R)

Body Cab Mount Set

from

$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

KAI – Fender Molding (Part No.GMK4144115732L)

Fender Molding

from

$21.99
New Goodmark Front Driver Side Lower Fender Molding, Except 1977 Models, Made Of Aluminum

Product Features:
  • Except 1977 Models Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender Molding (Part No.GMK4144115732R)

Fender Molding

from

$21.99
New Goodmark Front Passenger Side Lower Fender Molding, Except 1977 Models, Made Of Aluminum

Product Features:
  • Except 1977 Models Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – Powder Coated, Black, Steel, Unlighted, 7"W x 90"L (Part No.DZ15321S)

Powder Coated, Black, Steel, Unlighted, 7"W x 90"L

from

$506.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zee black NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More
View Product

Dee Zee – Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit (Part No.DZ15301S)

Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit

from

$326.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zeeblack NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More
View Product

KAI – Quarter Panel Patch (Part No.RRP150)

Quarter Panel Patch

from

$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28

Product Features:
  • 60 1/2 X 28, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material

from

$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Universal Fitting
  • Easy No Drill Installation
  • Perfect Compliment Nerf Bars
See More

(1 reviews)
View Product

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More
View Product

KAI – Quarter Panel (Part No.GMK4174610732R)

Quarter Panel

from

$119.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High

Product Features:
  • 7 3/4 Inches Wide X 14 1/2 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104L)

Backing Plate

from

$13.99
New Standard Replacement Driver Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104)

Backing Plate

from

$7.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4

Product Features:
  • 26 1/8 X 4 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104R)

Backing Plate

from

$12.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

1978 GMC C35 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1978 GMC C35. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 39 different Bodies and Fender Parts in our inventory ranging from $7.99 to $661.99. That means you can find the exact parts or products you need to keep that 1978 GMC C35 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1978 GMC C35. Dee Zee, KAI, and Energy Suspension are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1978 GMC C35, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1978 GMC C35 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1978 GMC C35 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 GMC C35 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your C35 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

FAQs for 1978 GMC C35 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1978 GMC C35?

Out of 39 Bodies and Fender Parts for the 1978 GMC C35, the most popular in our inventory are:
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
from $39.49
This product is not rated
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
Splash Guard (Mud Flap)
B-Pillar/Rocker Panel
from $44.99
This product is not rated
B-Pillar/Rocker Panel
Body B-Pillar and Rocker Panels
Fender Brace
from $21.99
This product is not rated
Fender Brace
Fender Braces