1978 Ford F-250 Wheels and Tires
More 1978 Ford F-250 Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1978 Ford F-250, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1978 Ford F-250 Wheels and Tires
National – Wheel Seal (Part No.370047A)
from
$44.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Red 37 Series oil bath seals deliver dependable point contact seal
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Unitized construction provides greater structural integrity, easier installation and main lip protection
- Abrasion-resistant nitrile with spring-loaded main lip for positive sealing with reduced shaft interference
- Unique rubber I.D. and O.D. includes patented SURE-LOCK® ribs that prevent shaft leaks and bore contamination
Yukon Gear – Dana 44 Front Axle Bearing And Seal Kit Replacement (Part No.10017)
from
$121.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for ’59 to ’94 Dana 44 and Ford 1/2 ton front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits 1959-1994 Ford F150 with Dana Spicer 44
- Includes inner and outer bearings and races and wheel seal
- Services one side
McGard – Chrome Cone Seat Wheel Installation Kit for 8 Lug Vehicles (9/16"-18 Thread Size) (Part No.84834)
from
$449.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 28 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)
from
$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Wheel Lug Nut: 1/2-20 Thread, Flanged, Duplex Mag, 1.81" Length, Chrome (Sold by each) (Part No.611-156)
from
$3.79
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.3920)
from
$16.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Timken – Wheel Bearing Race (Part No.K8002345507TIM)
from
$12.26
The Timken Wheel Bearing Race is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Yukon Gear – Hardcore Drive Flange, 30 Spline Inner, 48 Spline Outer (Part No.29075)
from
$129.99
Drive flange, 30 spline inner, 48 spline outer.
Product Features:
See More
Product Features:
- Drive flange
- Fits Dana 44
- 30 spline
- One single flange
Yukon Gear – Hardcore Drive Flange Kit For Dana 60, 35 Spline Outer Stubs – Non-Engraved Caps (Part No.29070)
from
$464.99
Yukon hardcore drive flange kit for Dana 60, 35 spline outer stubs. Non-engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 60 with 35 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Dorman – Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key (Part No.711-255)
from
$40.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut & Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" L, Gold, 16 Nuts/4 Locks/1 Key (Part No.711-235K)
from
$59.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut 1/2-20 Standard – 13/16 In. Hex, 5/8 In. Length (Part No.611-016)
from
$2.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Cone Seat Style Lug Nuts (M12 x 1.75 Thread Size) – Box of 100 Lug Nuts (Part No.69419)
from
$274.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Bulk box of 100.
Rugged Ridge – Hub Service Kit (Part No.15001.39)
from
$364.99
Are you looking to replace your manual locking hubs? Rugged Ridge has you covered with this pair of OE replacement manual locking hubs that fit the 30-spline Dana 50 and Dana 60 front axle shafts in 76-90 1-ton Chevy trucks, 90-93 3/4 ton and 1-ton Dodge
Product Features:
See More
Product Features:
- Hub Service Kit
National – Multi Purpose Seal (Part No.4148)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.442380)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Spindle Dust Caps (sold by each) (Part No.618-503)
from
$3.99
This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Wheel Hub Dust Caps – Ford (Part No.13973)
from
$7.99
This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Wheel Hub Fasteners – 8-32 X 1-1/2 In., Allen Head – 2000-78 (Part No.13802)
from
$8.49
This wheel hub screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel hub screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Stud: Serrated without Clip Head, 1/2-20 Thread Size, Right Hand Thread (Sold by each) (Part No.610-219)
from
$3.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Pik-a-Nut – Wheel Stud : Serrated Stud, 1/2-20 Thread Size, RHT, 1 Pack (Part No.98249.1)
from
$3.29
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
KAI – Wheel Housing (Part No.GMK314568073R)
from
$104.99
New Goodmark Passenger Side Bed Wheelhouse, For Styleside Pickups
Product Features:
See More
Product Features:
- For Styleside Pickups
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Housing (Part No.GMK314568073L)
from
$82.99
New Goodmark Driver Side Bed Wheelhouse, For Styleside Pickups
Product Features:
See More
Product Features:
- For Styleside Pickups
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Driveworks – Wheel Hub Assembly (Part No.NT515022)
from
$58.99
Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- Integral raceway provides proper clearance between the roller and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Broad range of designs and custom-tailored to specific applications and operating conditions
- ABS Components and Bearing Preload 100% Tested To OE Specs
- Premium seals, both inboard and outboard, protect the bearing
- Brand may vary by location
NTN – BCA Wheel Bearing (Part No.K800018686NTN)
from
$21.54
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.
Product Features:
See More
Product Features:
- For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
- For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.
National – Bearings (Part No.25590)
from
$30.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.A-37)
from
$18.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1978 Ford F-250 Wheels and Tires Categories
1978 Ford F-250 Wheels and Tires
You count on your 1978 Ford F-250 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 117 Wheels and Tires ranging in price from $2.29 to $734.99, you’re sure to find everything you need for your 1978 Ford F-250.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 8 different brands like Dorman, National, and Driveworks. 1978 Ford F-250 Wheels and Tires start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 5,030 extensive product reviews on 1978 Ford F-250 Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Oil Seal with 4.8 stars and Taper Bearing Set with 4.5 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1978 Ford F-250 below to get started!
Top-Rated Wheels and Tires Brands For Your 1978 Ford F-250
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Ford F-250 running right for years to come. In our inventory you’ll find brands like Dorman, National, Driveworks, and even more.
Popular National Wheels and Tires
You’ll find popular National brand products across Wheel Bearings. All are waiting to get your 1978 Ford F-250 back on the road. Some of the top-rated National products in these categories are:
Top-Rated Dorman – Help Wheels and Tires
If Dorman – Help are what you’re looking for, our inventory holds plenty. We stock Dorman – Help brand Wheels and Tires for your 1978 Ford F-250, and some of our most reviewed Dorman – Help parts include:
from
$38.49
(29)
Wheel Lug Nut & Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.407" L, Chrome, 16 Nuts/4 Locks/1 Key
Custom Wheel Lug nuts
from
$40.49
(24)
Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key
Locking Wheel Lug Nuts
FAQs for 1978 Ford F-250 Wheels and Tires
What are the most purchased Wheels and Tires for the 1978 Ford F-250?
Out of 117 Wheels and Tires for the 1978 Ford F-250, the most popular in our inventory are:
from
$2.49
This product is not rated
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Acorn, 1.38" Length, Chrome (Sold by each)
Custom Wheel Lug nuts
from
$2.49
This product is not rated
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Open End, 0.83" Length, Chrome (Sold by each)
Wheel Lug Nuts
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
What are the top-rated 1978 Ford F-250 Wheels and Tires?
Top-rated Wheels and Tires for your 1978 Ford F-250 based on customer reviews/ratings are:
