1978 Ford F-250 Hubs and Hub Assemblies
More 1978 Ford F-250 Hubs and Hub Assemblies
Find your specific 1978 Ford F-250 original or aftermarket Hubs and Hub Assemblies below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1978 Ford F-250 Hubs and Hub Assemblies
Yukon Gear – Hardcore Locking Hub For Dana 60, 35 Spline – ’79-’91 GM, ’78-’97 Ford, ’79-’93 Dodge, 1 Side (Part No.29088)
from
$379.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.
Product Features:
See More
Product Features:
- Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Yukon Gear – Hardcore Locking Hub Set For Dana 60, 35 Spline – ’99-’04 Ford (Part No.29083)
from
$679.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.
Product Features:
See More
Product Features:
- Fits 1999-2004 Ford Super Duty
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Yukon Gear – Hardcore Locking Hub Set For Dana 60, 35 Spline – ’79-’91 GM, ’78-’97 Ford, ’79-’93 Dodge (Part No.29082)
from
$699.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.
Product Features:
See More
Product Features:
- Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Rugged Ridge – Locking Hub (Part No.15001.18)
from
$286.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – Hardcore Locking Hub Set For Dana 60, 30 Spline – ’99-’04 Ford (Part No.29085)
from
$679.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.
Product Features:
See More
Product Features:
- Fits 1999-2004 Ford Super Duty
- 30 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Warn – Hub Service (Part No.11967)
from
$62.99
Ideal for OEM hub replacement. 4140 steel clutch ring. Inner drive gear. Precision cast hub body.
Product Features:
See More
Product Features:
- Standard Manual Hub Service Kit
Yukon Gear – Hardcore Locking Hub Set For Dana 44, GM & Ford 1/2 & 3/4 Ton, 19 Spline (Part No.29095)
from
$609.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect.
Product Features:
See More
Product Features:
- Fits 1978 and down GM Dana 44 and 1978-1992 Ford Dana 44
- 19 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Rugged Ridge – Locking Hub (Part No.15001.08)
from
$237.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Milemarker – Locking Hub Replacement Parts (Part No.449SK)
from
$36.99
For Mopar transfer case 203 N.P. pn(602). 4 x 2 conversion kit service part.
Product Features:
See More
Product Features:
- 4 x 2 Conversion Kit Service Part; Manual Hubs
Yukon Gear – Hardcore Locking Hub Set For Dana 60, 30 Spline – ’99-’04 Ford, 1 Side Only (Part No.29092)
from
$379.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only.
Product Features:
See More
Product Features:
- Fits 1999-2004 Ford Super Duty
- 30 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Yukon Gear – Hardcore Locking Hub Set For Dana 60, 30 Spline – ’75-’93 Dodge, ’77-’91 GM, ’78-’97 Ford (Part No.29084)
from
$679.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.
Product Features:
See More
Product Features:
- Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
- 30 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Popular 1978 Ford F-250 Hubs and Hub Assemblies Categories
1978 Ford F-250 Hubs and Hub Assemblies
Maybe you’re in the middle of a full rebuild of that 1978 Ford F-250. Maybe you just need a couple of Hubs and Hub Assemblies. Either way, Advance Auto Parts has 8 different Hubs and Hub Assemblies in our inventory ranging from $36.99 to $699.99. That means you can find the exact parts or products you need to keep that 1978 Ford F-250 running smoothly.
Hubs and Hub Assemblies are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Ford F-250. Milemarker, Warn, and Rugged Ridge are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Hubs and Hub Assemblies for your 1978 Ford F-250, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Hubs and Hub Assemblies to keep your 1978 Ford F-250 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Hubs and Hub Assemblies Brands To Make Your 1978 Ford F-250 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Ford F-250 demands trusted brand parts and products to keep it running. Many trusted brands of Hubs and Hub Assemblies make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 the best it can be. Be sure to browse some of our top Hubs and Hub Assemblies brands and parts.
Popular Milemarker Hubs and Hub Assemblies
We carry Milemarker parts in our stock across Locking Hub Service Kits categories, plus more. For a 1978 Ford F-250, our most popular Milemarker Hubs and Hub Assemblies include:
FAQs for 1978 Ford F-250 Hubs and Hub Assemblies
What are the most purchased Hubs and Hub Assemblies for the 1978 Ford F-250?
Out of 8 Hubs and Hub Assemblies for the 1978 Ford F-250, the most popular in our inventory are:
