1978 Ford E-150 Econoline Distributors

Essential 1978 Ford E-150 Econoline Distributors

MSD Ignition – Distributor Gear; Ford 351W; Bronze (Part No.8585)

Distributor Gear; Ford 351W; Bronze

from

$83.39
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Interstitial carbide improves wear resistance/running properties
  • Melonite QPQ coated reduces friction and initial wear
  • Proprietary formulated ductile iron.
  • Micro Polished Surface For Smooth Contact
See More

MSD Ignition – Distributor Gear; Ford; 302; Bronze (Part No.8583)

Distributor Gear; Ford; 302; Bronze

from

$83.39
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Interstitial carbide improves wear resistance/running properties
  • Melonite QPQ coated reduces friction and initial wear
  • Proprietary formulated ductile iron.
  • Micro Polished Surface For Smooth Contact
  • Increased outer hardened layer thickness (RC 55-60)
See More

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2502)

Chrome Distributor Hold-Down Clamp

from

$13.29
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed. Fits 1962-2001 Small Block Ford V8s, including both Windsor and Cleveland as well as Ford 385 series 429/460 big blocks including Boss models.

Product Features:
  • Eliminates bolt in favor of stud mount design
  • Chrome plated
  • Ideal For Ignition Distributor
See More

MSD Ignition – Distributor Gear; Ford 351W; Iron (Part No.85852)

Distributor Gear; Ford 351W; Iron

from

$42.49
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Dorman – Help – Distributor Gears (Part No.90455)

Distributor Gears

from

$19.29
This distributor drive gear is designed to match the fit, function and appearance of the original part on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this distributor drive gear matches the fit, function and appearance of the factory part on specified years, make and models.
  • Ideal solution – this drive gear is a reliable replacement for an original part that has failed due to moisture infiltration or vibration
  • Durable construction – this assembly is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Distributor T2687A: 100% New, With Cap and Rotor (Part No.T2687A)

Distributor T2687A: 100% New, With Cap and Rotor

from

$113.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Carquest Premium – Distributor T2890: 100% New, With Cap and Rotor (Part No.T2890)

Distributor T2890: 100% New, With Cap and Rotor

from

$200.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Carquest Premium – Distributor T2875A: 100% New, With Cap and Rotor (Part No.T2875A)

Distributor T2875A: 100% New, With Cap and Rotor

from

$72.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Accel – Dist:Ford 86-93 5.0L With Module (Part No.59210)

Dist:Ford 86-93 5.0L With Module

from

$254.99
ACCEL Performance Distributors are the perfect choice for your daily driver or street machine, We know the importance of a good quality distributor that doesn’t break the bank. These distributors feature a cast aluminum housing with a sintered bronze bushings for long life. An OEM style module is included along with a high-quality gear and cap with brass terminals for many miles of trouble-free service. ACCEL Performance Distributors are built to deliver performance at a value-based price. Supplied with Black Cap! The Ford TFI ignition module supplied accepts the factory style connector.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • All New Cast Aluminum Housings for durability
  • OEM Style Ignition Modules for Trouble-Free Service
  • High-Quality Distributor Gears
  • Long Sintered Bushings for Long Life
  • Distributor Cap w/Brass Terminals
See More

Carquest Premium – Distributor T2680: 100% New, With Cap and Rotor (Part No.T2680)

Distributor T2680: 100% New, With Cap and Rotor

from

$122.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1038)

Distributor Vacuum Advance

from

$48.49
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1103)

Distributor Vacuum Advance

from

$46.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

PerTronix – D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit (Part No.D9011)

D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

PerTronix – D703700 Vacuum Lockout Kit for Flame-Thrower Counter Clockwise Billet Distributor (Part No.D703700)

D703700 Vacuum Lockout Kit for Flame-Thrower Counter Clockwise Billet Distributor

from

$18.99


Product Features:
  • PerTronix D703700 Vacuum Lockout Kit for PerTronix Flame-Thrower Counter Clockwise Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)

D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

PerTronix – D701700 Vacuum Canister for Flame-Thrower Billet Distributor (Part No.D701700)

D701700 Vacuum Canister for Flame-Thrower Billet Distributor

from

$36.99


Product Features:
  • PerTronix D701700 Vacuum Canister for PerTronix Flame-Thrower Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

PerTronix – D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600700)

D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

PerTronix – D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650710)

D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

Driveworks – Distributor Cap (Part No.24085)

Distributor Cap

from

$16.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Motorcraft – Original Equipment (O.E.) Housing Assembly – Distributor Terminal (Part No.DH-411B)

Original Equipment (O.E.) Housing Assembly - Distributor Terminal

from

$23.79
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
See More

Motorcraft – Motorcraft Distributor Cap (Part No.F2010195397MTR)

Motorcraft Distributor Cap

from

$26.83
Every Motorcraft distributor component delivers the quality performance you have come to expect from Ford Motor Company products.

Product Features:
  • High-density phenolic or polyester plastic with high resistance helps to keep high voltage from making contact and causing misfire
  • Molded metal contact inserts to help prevent dirt and moisture from entering the distributor
  • Motorcraft distributor caps are the best choice for Ford and Lincoln vehicles
See More

MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)

Cap/Rotor Kit; Street Fire; Ford V8; Socket

from

$48.49
All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!

Product Features:
  • Supplied w/Heavy Duty Rotor
  • Low Resistance Terminals
  • Full Power Output At High RPM
  • Perfect For Budget Minded Enthusiasts
See More

Carquest Premium – Distributor Rotor (Part No.DAA1088)

Distributor Rotor

from

$6.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Rotor (Part No.23A1005)

Distributor Rotor

from

$4.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Driveworks – Distributor Rotor (Part No.23050)

Distributor Rotor

from

$4.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Distributor Rotor

from

$4.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)

Rotor Assembly; Chevy V8 Cap-A-Dapt

from

$60.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase

Product Features:
  • Rotor phasing can be adjusted.
  • Ideal When Atomic TBI Is Controlling The Timing
See More

Carquest – Distributor Rotor (Part No.D213)

Distributor Rotor

from

$12.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

1978 Ford E-150 Econoline Distributors

Maybe you’re in the middle of a full rebuild of that 1978 Ford E-150 Econoline. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 45 different Distributors in our inventory ranging from $4.99 to $580.99. That means you can find the exact parts or products you need to keep that 1978 Ford E-150 Econoline running smoothly.

Distributors are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Ford E-150 Econoline. Carquest, Carquest Premium, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Distributors for your 1978 Ford E-150 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 178 reviews in this category, some of the top rated parts include Distributor; Ford 351W; Ready-to-Run with 3.2 stars and Distributor T2895A: 100% New, With Cap and Rotor with 3.5 stars.

So if you’re in the market for aftermarket Distributors to keep your 1978 Ford E-150 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Distributors Brands To Make Your 1978 Ford E-150 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Ford E-150 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your E-150 Econoline the best it can be. Be sure to browse some of our top Distributors brands and parts.

Popular Carquest Distributors

We carry Carquest parts in our stock across Distributor Cap Kits categories, plus more. For a 1978 Ford E-150 Econoline, our most popular Carquest Distributors include:
Distributor Cap
from $19.05
(28)
Distributor Cap
Distributor Cap Kits
Distributor Cap
from $30.99
(1)
Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $12.99
(4)
Distributor Rotor
Distributor Rotor Buttons

FAQs for 1978 Ford E-150 Econoline Distributors

What are the most purchased Distributors for the 1978 Ford E-150 Econoline?

Out of 45 Distributors for the 1978 Ford E-150 Econoline, the most popular in our inventory are:
Distributor Cap
from $19.99
This product is not rated
Distributor Cap
Distributor Cap Kits
Distributor Cap
from $17.05
This product is not rated
Distributor Cap
Distributor Cap Kits

What are the top-rated 1978 Ford E-150 Econoline Distributors?

Top-rated Distributors for your 1978 Ford E-150 Econoline based on customer reviews/ratings are:
Distributor; Ford 351W; Ready-to-Run
from $569.99
(6)
Distributor; Ford 351W; Ready-to-Run
“Reading all these reviews, it’s obvious the poor reviews are from people who didn’t use the product correctly and with the wrong tools. If you can’t ”
Distributor T2895A: 100% New, With Cap and Rotor
from $102.99
(2)
Distributor T2895A: 100% New, With Cap and Rotor
“It works as it should but the cap and spacer under the cap don’t get drawn down tightly by the 2 clamps. Easy to wiggle around. I’ll be looking tomorr”
Distributor T2669: 100% New, With Cap and Rotor
from $91.99
(1)
Distributor T2669: 100% New, With Cap and Rotor
“I have always been skeptical of buying things online but you guys have definitely made it easy for me to do I have bought two or three times now onlin”