1978 Chevrolet Nova Drivetrains

Essential 1978 Chevrolet Nova Drivetrains

Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)

Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design

from

$189.99
Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 30 spline
  • Mechanics 3R u-joint size
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Taper Bearing Cup

from

$7.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$166.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

National – Bearings (Part No.M804049)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Neapco – Double Cardan CV Flange Yoke (Part No.N3R-83-482)

Double Cardan CV Flange Yoke

from

$96.49
Double Cardan CV Flange Yoke
See More

Yukon Gear – Minor Install Kit For GM 12 Bolt Car Differential (Part No.12043)

Minor Install Kit For GM 12 Bolt Car Differential

from

$145.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (Includes Supershims).

Product Features:
  • Fits GM 12 bolt passenger car
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

National – Shaft Repair Sleeve (Part No.99152)

Shaft Repair Sleeve

from

$40.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1022-B)

RngPnnInstlKt

from

$43.99
RngPnnInstlKt

Motive Gear – Differential Bearing Kit – Timken (Part No.R12CRT)

Differential Bearing Kit - Timken

from

$103.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL GM 12 BOLT CAR
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

Axle Repair Bearing

from

$16.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

USA Standard Gear – Spartan Locker For GM 8.5" With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17041)

Spartan Locker For GM 8.5" With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$618.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits GM 18.5″ with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)

Carrier Installation Kit For GM 8.5" Differential With HD Bearings

from

$151.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ with aftermarket positraction
  • Works with Heavy Duty Bearings
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Dura Grip Case, GM 12 Bolt Car, 3 Series (Part No.20104)

Dura Grip Case, GM 12 Bolt Car, 3 Series

from

$386.99
GM 12P DURA GRIP case, bare, 3.08-3.90, 30spline & 33spline.

Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits GM 12 bolt passenger car
  • 3.08 – 3.90 ratios only
See More

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$52.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-308A)

Differential Ring and Pinion

from

$179.99


Product Features:
  • GM 10BL 8.5 R/P 3.08
See More

Driveworks – Taper Bearing Cup (Part No.S-M-88010)

Taper Bearing Cup

from

$5.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

1350 U/Joint With Zerk Fitting

from

$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More

USA Standard Gear – Standard Spider Gear Set For GM 7.5", 26 Spline (Part No.39023)

Standard Spider Gear Set For GM 7.5", 26 Spline

from

$156.99
Product Features:
  • Spider gear kit
  • Fits GM 7.5″ 26 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Richmond Gear – MiniSpool (Part No.78-1230-1)

MiniSpool

from

$151.99
MiniSpool

Dorman – Spindle Washer – I.D. 19.9mm O.D. 40mm Thickness 3.25mm (sold by each) (Part No.618-059)

Spindle Washer - I.D. 19.9mm O.D. 40mm Thickness 3.25mm (sold by each)

from

$2.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette (Part No.33345)

Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette

from

$51.99
Positraction cross pin bolt for for 8.2″ GM CI ‘Vette.

Product Features:
  • Cross pin bolt for GM 8.2″ and 1963-1979 Corvette
  • For OEM positraction applications only
See More

Pro-King – Axle Seal (Part No.721A074)

Axle Seal

from

$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Oil Seal (Part No.S-8611N)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 1310, U/Jnt Straps & Bolts, 8.5" Front, 12P & 12T GM (Part No.41196)

1310, U/Jnt Straps & Bolts, 8.5" Front, 12P & 12T GM

from

$61.99
1310, U/Jnt straps & bolts, 8.5″ front, 12P & 12T GM.

Product Features:
  • u-joint strap kit
  • Fits GM 12 bolt passenger car and truck and 8.5″ front
  • 1310 u-joint size
  • Includes two straps and four bolts
See More

Popular 1978 Chevrolet Nova Drivetrains Categories

1978 Chevrolet Nova Drivetrains

You count on your 1978 Chevrolet Nova to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 308 Drivetrains ranging in price from $1.99 to $1,014.99, you’re sure to find everything you need for your 1978 Chevrolet Nova.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, Felpro, and DriveWorks. 1978 Chevrolet Nova Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,156 extensive product reviews on 1978 Chevrolet Nova Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1978 Chevrolet Nova below to get started!

Top-Rated Drivetrains Brands For Your 1978 Chevrolet Nova

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Chevrolet Nova running right for years to come. In our inventory you’ll find brands like Moog, Felpro, DriveWorks, and even more.

Popular Mr. Gasket Drivetrains

You’ll find popular Mr. Gasket brand products across Differentials. All are waiting to get your 1978 Chevrolet Nova back on the road. Some of the top-rated Mr. Gasket products in these categories are:
Differential Gasket
from $15.99
(1)
Differential Gasket
Rear Differential Cover Gaskets

Top-Rated Drivetrains


If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1978 Chevrolet Nova, and some of our most reviewed parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1978 Chevrolet Nova Drivetrains

What are the most purchased Drivetrains for the 1978 Chevrolet Nova?

Out of 308 Drivetrains for the 1978 Chevrolet Nova, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $20.49
(33)
Universal Joint
U-Joints
Oil Seal
from $5.49
(38)
Oil Seal
Axle Shaft Seals

What are the top-rated 1978 Chevrolet Nova Drivetrains?

Top-rated Drivetrains for your 1978 Chevrolet Nova based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Non-Greaseable Super Strength Universal Joint
from $32.99
(28)
Non-Greaseable Super Strength Universal Joint
“installed as needed”
Bearings
from $16.99
(25)
Bearings
“Fit like it should no issues”