1978 Chevrolet K5 Blazer Differentials

Name: Replacement Standard Open Carrier Case For Dana 44, 30 Spline, 3.92 & Up, Bare
Brand: Yukon Gear
SKU: 20116
Price: 155.99 USD

Find your specific 1978 Chevrolet K5 Blazer original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1978 Chevrolet K5 Blazer Differentials

from

$155.99

Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.92 & up, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.

Product Features:

Standard open carrier case
Fits Dana Spicer 44 with 30 spline axles
3.92 and up ratio only
Does not include spider gears
Includes ring gear bolts, carrier shim kit, roll pin and cover gasket

from

$11.99

Standard Open pinion gear thrust washer for GM 12P and 12T.

Product Features:

Pinion gear thust washer for GM 12 bolt passenger car and truck
Fits standard open differentials only

from

$26.99

Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:

Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
Left hand thread

from

$57.99

Product Features:

Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear

from

$67.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:

Powr Lok button kit
Fits Dana Spicer 30, 44 and Chrysler 8.75″

from

$111.99

Product Features:

GM10 BOLT 8.5″ 28 SPL INTERNAL KIT (OPEN)

from

$336.99

Yukon positraction internals (0.795″ diameter) for 8.5″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit is compatible with Yukon Dura Grip or Eaton positractions. It will not fit a factory Gov-Loc positraction.

Product Features:

Spider gear kit
Fits GM 8.5″ with 28 spline Dura Grip positraction
Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$4.99

3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:

Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac

from

$11.99

8.5 front cover gasket.

Product Features:

Cover gasket
Fits GM 8.5″ front

from

$83.99

Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

Product Features:

Axle Redi-sleeve
Fits Dana Spicer 44

from

$129.99

Product Features:

Fits standard rotation Dana Spicer 44
Steel

from

$12.99

Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:

Roll pin for Dana Spicer 30 and Dana Spicer 44
0.235″ diameter

from

$5.99

Product Features:

Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
0.030″ thick

from

$177.99

Product Features:

Clutch kit
Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
Smooth design

from

$16.99

ZIP locker switch.

Product Features:

Switch

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM89410 race
All steel construction

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 44 and Toyota 8″ and V6

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$46.99

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Dana Spicer 44
Works with Spartan Locker or standard open spider gears

from

$5.99

Product Features:

Outer oil slinger for Dana Spicer 25, 27, 30, 44 and 50

from

$139.99

Product Features:

Fits GM 8.5″ with 28 spline axles
Installs into a standard open carrier case
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles
Mini spool

from

$69.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -100°F to 450°F; -73°C to 232°C
Resistant to hydrocarbon/oxygenate blends and provides superior performance
Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
Delivers quality and reliable performance for every type of repair

from

$4.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

Popular 1978 Chevrolet K5 Blazer Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Pinion Shafts

Differential Carrier Bearing Shims

Differential Crush Sleeves

Pinion Shaft Seals

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential Lock Washers

Differential Lock Thrust Blocks

Maybe you’re in the middle of a full rebuild of that 1978 Chevrolet K5 Blazer. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 421 different Differentials in our inventory ranging from $2.49 to $1,674.99. That means you can find the exact parts or products you need to keep that 1978 Chevrolet K5 Blazer running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Chevrolet K5 Blazer. Valvoline, Felpro, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1978 Chevrolet K5 Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,705 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 4.2 stars and Axle Housing Cover Gasket with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 1978 Chevrolet K5 Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1978 Chevrolet K5 Blazer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Chevrolet K5 Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K5 Blazer the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Valvoline Differentials

We carry Valvoline parts in our stock across Differential Oil categories, plus more. For a 1978 Chevrolet K5 Blazer, our most popular Valvoline Differentials include:

from $12.79

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

FAQs for 1978 Chevrolet K5 Blazer Differentials

What are the most purchased Differentials for the 1978 Chevrolet K5 Blazer?

Out of 421 Differentials for the 1978 Chevrolet K5 Blazer, the most popular in our inventory are:

from $9.99

(195)

Differential Cover Gasket

Rear Housing Cover Gaskets

from $5.99

(11)

Differential Shaft Lock Bolt

Differential Pinion Shaft Lock Bolts

from $2.49

This product is not rated

Ring Gear Bolt

Differential Ring Gear Bolts

What are the top-rated 1978 Chevrolet K5 Blazer Differentials?

Top-rated Differentials for your 1978 Chevrolet K5 Blazer based on customer reviews/ratings are:

from $342.99

(23)

Differential Ring And Pinion

“So far so good.”

from $6.49

(10)

Axle Housing Cover Gasket

“fit perfectly and was easy to work with.no more leaking rear differential.”

from $15.99

(9)

Bearings

“as advertised”

1978 Chevrolet K5 Blazer Differentials

More 1978 Chevrolet K5 Blazer Differentials

Essential 1978 Chevrolet K5 Blazer Differentials

Yukon Gear – Replacement Standard Open Carrier Case For Dana 44, 30 Spline, 3.92 & Up, Bare (Part No.20116)

Yukon Gear – Standard Open Pinion Gear Thrust Washer For GM 12P And 12T (Part No.33381)

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI)

Yukon Gear – Positraction Internals For 8.5" GM With 28 Spline Axles (Part No.16052)

National – Bearings (Part No.M88010)

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

Yukon Gear – 8.5 Front Cover Gasket (Part No.23021)

Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

Yukon Gear – Steel Cover For Dana 44 Standard Rotation (Part No.32319)

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Smooth (Part No.16152)

Yukon Gear – Zip Locker Switch (Part No.34015)

Yukon Gear – Bearing Race Driver (Part No.56017)

National – Bearings (Part No.M88048)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 44 (Part No.17017)

Yukon Gear – Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50 (Part No.33011)

USA Standard Gear – Mini Spool For GM 8.5", 28 Spline (Part No.59011)

National – Multi Purpose Seal (Part No.5778V)

Driveworks – Oil Seal (Part No.S-471424)

Popular 1978 Chevrolet K5 Blazer Differentials Categories