1978 Buick Century Engine Parts

Essential 1978 Buick Century Engine Parts

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)

Performer Series Retainer (Qty 16)

from

$95.99
Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:
  • Valve Spring Retainers for Use OE Cast Iron Heads
  • Superior Quality Heat-Treated Steel
  • Machined for Strength with Black Oxide Finish
  • Finish Ensures Rust and Corrosion Protection
See More

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)

Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8

from

$366.99


Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)

For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile

from

$119.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 PSI Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

Sealed Power – Gasket Kit (Part No.260-1079)

Gasket Kit

from

$91.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Includes Fel-Pro gaskets (#1 brand of gaskets)
  • Provides exact gaskets application requires
  • Recommended for street rod or muscle car
  • Delivers dependable performance and superior service life
  • Application-specific design for perfect fit and correct operation
See More

Sealed Power – Engine Oil Pump Screen (Part No.224-1246)

Engine Oil Pump Screen

from

$14.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Manufactured to fit a specific application
  • Provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system
  • It is recommended that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation
  • Oil pump screen assemblies are manufactured under strict quality guidelines
  • Utilizes ISO & QS certified manufacturing
  • 5/8″ Inlet tube
See More

Melling – Engine Oil Priming Tool (Part No.PT13)

Engine Oil Priming Tool

from

$71.99
Melling Engine Oil Priming Tools were developed as a way for engine builders to safely pre-prime the engine with oil prior to the initial engine startup. The Priming tool, with the use of a standard drill circulates oil to all of the critical areas of the new engine quickly and safely.

Product Features:
  • Priming tool circulates oil through critical areas of a new engine before engine start up
  • Manufactured from high quality materials for consistent durable wear
  • Precision engineered for optimum fit and function
  • Designed for long-life and worry-free performance
See More

Sealed Power – Engine Oil Pump Repair Kit (Part No.224-518)

Engine Oil Pump Repair Kit

from

$27.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Felpro – Gasket Kit (Part No.260-1000BT)

Gasket Kit

from

$147.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More

Dorman – Help – Oil Pump Bushing (Part No.90460)

Oil Pump Bushing

from

$4.99
This engine oil pump bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine oil pump bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)

Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each)

from

$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Oil pan (Part No.A6060682751DOR)

Engine Oil pan

from

$170.74
Our comprehensive line of Engine Oil Pans include drain plugs for a complete repair. Since this part is a direct replacement, the exact fit provides an additional layer of efficiency and convenience.

Product Features:
  • Stamped steel or cast aluminum construction ensures long lasting durability
  • High strength coating prevents rust
  • Manufactured to strict engineering quality standards
  • Oil drain plug and drain plug gaskets also available separately
See More

Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)

Cam Bolt Lock Plate Kit

from

$18.09
Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:
  • Black oxide finished steel
  • Includes (3) grade 5 bolts & locking plate
  • Fits Chevrolet Small and Big Block without OE roller cam
  • Tabs bend up around bolt head to secure
See More

Sealed Power – Engine Piston Set (Part No.8KH423DCP 30)

Engine Piston Set

from

$190.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Hypereutectic
  • Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
  • Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
  • Piston skirts protected by next-gen DUROSHIELD« coating.
  • TAC┐ ring groove geometry
  • Weight matched to +/- 2 grams.
See More

MAHLE Original – Camshaft Cover (Part No.H36978)

Camshaft Cover

from

$4.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

National – Shaft Repair Sleeve (Part No.99174)

Shaft Repair Sleeve

from

$45.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Felpro – Oil Pan Gasket Set: Cork-Rubber, 1 Piece Set (Part No.OS 11408 C-1)

Oil Pan Gasket Set: Cork-Rubber, 1 Piece Set

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Spartan – Engine Long Block; Chev 350 4-Bolt HP Engine (Part No.VC01)

Engine Long Block; Chev 350 4-Bolt HP Engine

from

$2551.99
Remanufactured Engines are completely disassembled & put through the same process every time. All heads, blocks, cranks and cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:
  • Gasket set for installation included
  • Engines are packaged in tub containers for safe delivery and easy core return
  • Product might not be available in all states due to local laws.
See More

Felpro – Engine Gasket Set (Part No.FS 8510 PT)

Engine Gasket Set

from

$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Validated for fit, form, and function
See More

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Engine Rocker Arm Ball

from

$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Felpro – Valley Pan Gasket Set (Part No.MS 96022)

Valley Pan Gasket Set

from

$39.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Cloyes Gear – Engine Oil Galley Plug (Part No.P9115)

Engine Oil Galley Plug

from

$5.49
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Product Features:
  • Current OE Revision Component
  • Meet or exceed OEM performance requirements
See More

Spectre – Engine Dress Steel Up Kit (Part No.54083)

Engine Dress Steel Up Kit

from

$119.99
Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:
  • For Chevrolet small block 265 and 400
  • Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
  • Designed for use with OE specifications for fit and function
  • Made from high quality material
See More

Mahle – Crankshaft Seal (Part No.A8060205363MAH)

Crankshaft Seal

from

$19.03
Crankshaft Seal

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9405 PT-1)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Sealed Power – Engine Piston (Part No.WH423DCP)

Engine Piston

from

$20.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Hypereutectic
  • Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
  • Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
  • Piston skirts protected by next-gen DUROSHIELD« coating.
  • TAC┐ ring groove geometry
  • Weight matched to +/- 2 grams.
See More

Felpro – Engine Oil Pump Gasket (Part No.70032)

Engine Oil Pump Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Engine Timing Cover Repair Sleeve (Part No.16202)

Engine Timing Cover Repair Sleeve

from

$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Engine$aver Hardware cost-saving application
  • Repairs worn sealing surfaces to assure a leak free repair
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Validated for fit, form, and function
See More

Popular 1978 Buick Century Engine Parts Categories

1978 Buick Century Engine Parts

You count on your 1978 Buick Century to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 400 Engine Parts ranging in price from $0.43 to $5,984.99, you’re sure to find everything you need for your 1978 Buick Century.

Brands matter. If you want to shop a specific Engine Parts brand, we stock 24 different brands like Sealed Power, Felpro, and Dorman. 1978 Buick Century Engine Parts start as low as $0.43!

One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4,716 extensive product reviews on 1978 Buick Century Engine Parts. Some of the top-rated Engine Parts products we carry are Engine Long Block; Chev 350 64-85 H.P. Mid-Drss with 4.8 stars and Engine Valve Cover Gasket Set with 4.6 stars.

Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1978 Buick Century below to get started!

Top-Rated Engine Parts Brands For Your 1978 Buick Century

Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Buick Century running right for years to come. In our inventory you’ll find brands like Sealed Power, Felpro, Dorman, and even more.

Popular Anchor Engine Parts

You’ll find popular Anchor brand products across Engine Mounts. All are waiting to get your 1978 Buick Century back on the road. Some of the top-rated Anchor products in these categories are:
Engine Mount: Front Left, Front Right, 1 Piece
from $13.49
(18)
Engine Mount: Front Left, Front Right, 1 Piece
Engine Mounts

FAQs for 1978 Buick Century Engine Parts

What are the most purchased Engine Parts for the 1978 Buick Century?

Out of 400 Engine Parts for the 1978 Buick Century, the most popular in our inventory are:
Engine Valve Lifter
from $13.99
(15)
Engine Valve Lifter
Engine Valve Lifters
Engine Push Rod
from $2.99
(5)
Engine Push Rod
Push Rods
TIMING COVER GASKET SET
from $19.99
(24)
TIMING COVER GASKET SET
Timing Cover Gasket Sets

What are the top-rated 1978 Buick Century Engine Parts?

Top-rated Engine Parts for your 1978 Buick Century based on customer reviews/ratings are:
Engine Long Block; Chev 350 64-85 H.P. Mid-Drss
from $4158.99
(32)
Engine Long Block; Chev 350 64-85 H.P. Mid-Drss
“Fit and work perfectly.”
Engine Valve Cover Gasket Set
from $25.99
(17)
Engine Valve Cover Gasket Set
“Good product.”
Engine Oil Filler Cap: 10066, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
from $5.49
(15)
Engine Oil Filler Cap: 10066, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“Its an oil cap that fit and was cheap.”