1978 AMC Pacer Performance and Racing Products
Find Your Specific 1978 AMC Pacer Performance and Racing Products
Below you will find various in-demand AMC Performance and Racing Products, components and accessories for your 1978 Pacer. Advance Auto Parts has popular Pacer parts like Performance Engines, Performance Exhaust Products, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Pacer model years including
1975,
1976,
1977,
1979,
1980 and more. Select a category of 1978 AMC Pacer Performance and Racing Products below and start saving instantly.
Popular 1978 AMC Pacer Performance and Racing Products Categories
Essential Performance and Racing Products for 1978 AMC Pacers
Edelbrock – Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401 (Part No.7213)
from
$27.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Spectre – Valve Cover (Part No.5275)
from
$64.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for AMC/Jeep V8 engines, this valve cover features triple chrome-plated steel construction. Sold in pairs, this standard height cover is built to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.
Product Features:
See More
Product Features:
- Designed for AMC/Jeep V8 engines
- Sold in pairs
- Triple chrome-plated steel construction
- Stock height
- Features OEM style sealing edge
Energy Suspension – Motor Mount (Part No.2.1102G)
from
$43.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Mr. Gasket – Oil Pan Bolt Kit (Part No.6087)
from
$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
Mr. Gasket – Dust Cap (Part No.2485)
from
$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Set of 2 Caps
- Easy Installation
- 2 Per Set
Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)
from
$504.99
Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Includes Std Oil Fill ; PCV ; A/C Accy Bosses
- Not for Exhaust-Heat Chokes – No Exhaust Crossover
MSD Ignition – Distributor; AMC V8; Ready-to-Run (Part No.8523)
from
$647.99
Finally an answer for your amps worn out breaker points distributor! This Ready-to-Run Pro-Billet distributor has a built-in inductive module that produces up to 7.5 A to create a high voltage spark at the plug. This spark improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance. Since this distributor has its own ignitions module there is no need to run an MSD Ignition control. Installation of the distributor is simple with only three wires to connect with the supplied Weathertight harness. Under the MSD cap is a mechanical advance that is supplied with different advance springs and stop bushings, giving you 24 curves to choose from. the ready to run AMC distributor also has a vacuum advance canister and is supplied with everything you need for installation.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- CNC machined billet aluminum housing and billet aluminum base
- Built-in module produces a 7.5 amp single spark through high rpm
- Includes built-in Rev Limiter
Mallory – Distributor Drive Gear (Part No.29425)
from
$117.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$141.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Edelbrock – Cylinder Head Gasket Set for AMC/Jeep (Part No.7329)
from
$107.99
Edelbrock part #7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″ bore size, .045″ compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Ede
Product Features:
See More
Product Features:
- 4.275 in. Cylinder Bore Diameter
- 0.045 in. Thickness
- 10.60cc Volume
- Gray Color
- Two Piece Configuration
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mr. Gasket – Oilpangasketset (Part No.890)
from
$42.49
Manufactured from high-density cork/rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For original equipment replacement and high performance street.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- Provides excellent sealing and durability
- Complete with molded rubber front/rear oil pan end seals where applicable
- For OE replacement and high performance street use
Edelbrock – Exhaust Manifold Gasket Set for AMC/Jeep (Part No.7239)
from
$34.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.80 in. x 1.30 in. Port Size
- For AMC Engines
- Gray Color
- Two Piece Configuration
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Hurst – Automatic Shifter, Quarter Stick (Part No.3160014)
from
$426.99
The award-winning Quarter Stick automatic shifter is designed to provide positive gear change control for street or racing transmission applications. Gated mechanism. NHRA/IHRA approved reverse lockout.
Product Features:
See More
Product Features:
- Forward and Reverse Shift Patterns
- Chrome Plated Trigger for Detent Activity
- Factory Neutral Safety Switch
- Compact And Lightweight
- Roller Detent with Shifter Pattern
Hurst – Automatic Shifter, Quarter Stick (Part No.3160009)
from
$426.99
The award-winning Quarter Stick automatic shifter is designed to provide positive gear change control for street or racing transmission applications. Gated mechanism. NHRA/IHRA approved reverse lockout.
Product Features:
See More
Product Features:
- Forward and Reverse Shift Patterns
- Chrome Plated Trigger for Detent Activity
- Factory Neutral Safety Switch
- Compact And Lightweight
- Roller Detent with Shifter Pattern
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Edelbrock – 1970 – Later AMC Head Bolt Kit (Part No.8532)
from
$252.99
Product Features:
See More
- Hex Head Drive Type
- 3.78 in. Length
- 0.5 in. Thread Diameter
- Coarse Thread Type
- Chromoly Material
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Upgrade your 1978 AMC Pacer with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1978 AMC Pacer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your AMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Pacer functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Performance and Racing Products for the 1978 AMC Pacer, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1978 AMC Pacer at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.69 to $647.99, with
an average price of $142.24.
Our 27 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1978 AMC Pacer without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1978 AMC Pacer, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mr. Gasket Edelbrock, and more.
Mr. Gasket Performance and Racing Products
start at just $12.09 and boast an impressive 4 stars average rating from customers.
With 114 customer reviews and counting, our 1978 AMC Pacer Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1978 AMC Pacer is always ready to roll. We’re committed to providing you with everything you need to keep your Pacer in top shape, all in one place.
Start shopping confidently below for your 1978 AMC Pacer!
Best-Selling Performance Engines for 1978 AMC Pacers
Enhance the driving experience in your AMC with 9 quality Performance Engine components, starting at $26.99.
Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)
from
$424.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Not for Stock Motorcraft Spread Bore Carburetor
- Two Center Bolt Holes are Offset
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Edelbrock – Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401 (Part No.7213)
from
$27.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)
from
$171.99
The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit
Product Features:
See More
Product Features:
- Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
- Intake: 1.13″x2.21″ Port/.030″ Thick
- Exhaust: 1.80″x1.30″ Port
- 3/16″ Valve Cover
- Multi Piece Configuration
Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)
from
$504.99
Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Includes Std Oil Fill ; PCV ; A/C Accy Bosses
- Not for Exhaust-Heat Chokes – No Exhaust Crossover
Edelbrock – 1970 – Later AMC Head Bolt Kit (Part No.8532)
from
$252.99
Product Features:
See More
- Hex Head Drive Type
- 3.78 in. Length
- 0.5 in. Thread Diameter
- Coarse Thread Type
- Chromoly Material
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$141.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Edelbrock – Cylinder Head Gasket Set for AMC/Jeep (Part No.7329)
from
$107.99
Edelbrock part #7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″ bore size, .045″ compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Ede
Product Features:
See More
Product Features:
- 4.275 in. Cylinder Bore Diameter
- 0.045 in. Thickness
- 10.60cc Volume
- Gray Color
- Two Piece Configuration
Mr. Gasket – Oilpangasketset (Part No.890)
from
$42.49
Manufactured from high-density cork/rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For original equipment replacement and high performance street.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- Provides excellent sealing and durability
- Complete with molded rubber front/rear oil pan end seals where applicable
- For OE replacement and high performance street use
Most Popular 1978 AMC Pacer Performance Exhaust Products
Customize your AMC with 2 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets, all
priced under $34.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Edelbrock – Exhaust Manifold Gasket Set for AMC/Jeep (Part No.7239)
from
$34.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.80 in. x 1.30 in. Port Size
- For AMC Engines
- Gray Color
- Two Piece Configuration
Top Picks for 1978 AMC Pacer Performance Ignition Products
Upgrade AMC Pacers with top-quality Performance Ignition Products parts, including 4 OEM and aftermarket selections for your 1978 model.
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
In-Demand Performance Transmissions for 1978 AMC Pacers
Select from 2 premium Performance Transmissions parts for your 1978 AMC Pacer, with prices ranging from $7.69 to $43.99.
Energy Suspension – Motor Mount (Part No.2.1102G)
from
$43.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
Most Sold 1978 AMC Pacer Performance Distributors
Explore our best-selling AMC parts for the 1978 Pacer among 2 OEM and aftermarket options starting from $117.99.
MSD Ignition – Distributor; AMC V8; Ready-to-Run (Part No.8523)
from
$647.99
Finally an answer for your amps worn out breaker points distributor! This Ready-to-Run Pro-Billet distributor has a built-in inductive module that produces up to 7.5 A to create a high voltage spark at the plug. This spark improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance. Since this distributor has its own ignitions module there is no need to run an MSD Ignition control. Installation of the distributor is simple with only three wires to connect with the supplied Weathertight harness. Under the MSD cap is a mechanical advance that is supplied with different advance springs and stop bushings, giving you 24 curves to choose from. the ready to run AMC distributor also has a vacuum advance canister and is supplied with everything you need for installation.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- CNC machined billet aluminum housing and billet aluminum base
- Built-in module produces a 7.5 amp single spark through high rpm
- Includes built-in Rev Limiter
Mallory – Distributor Drive Gear (Part No.29425)
from
$117.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
Top-Rated Performance and Racing Products Brands For Your 1978 AMC Pacer
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1978 AMC Pacers. Below you’ll find some of our best rated Performance and Racing Products from Mr. Gasket and Edelbrock, and more. Performance and Racing Products from these brands that fit a 1978 Pacer start at just $12.09 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mr. Gasket 1978 AMC Pacer Performance and Racing Products
When it comes to maintaining or upgrading your 1978 AMC Pacer, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Performance and Racing Products, specifically designed for the 1978 AMC Pacer. With over 5 Mr. Gasket brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.09, with an average price of just $31.97. Plus, with over 21 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Edelbrock 1978 AMC Pacer Performance and Racing Products
Edelbrock auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1978 AMC Pacer owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1978 Pacer, Advance Auto Parts carries a full inventory of 9 Edelbrock Performance and Racing Products. Plus you will be keeping your AMC in peak condition while saving money because prices on these Edelbrock Performance and Racing Products range from $27.99 to $504.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$27.99
$27.99
This product is not rated
Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401
“”
from
$171.99
$171.99
This product is not rated
Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep
“”
from
$75.99
$75.99
This product is not rated
Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel
“”
FAQs for 1978 AMC Pacer Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1978 AMC Pacers?
Out of 27 Performance and Racing Products that fit 1978 AMC Pacers, the following parts are the top sellers:
- Thermocap Radiator Cap (10648825) – $48.09
- Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel (5026997) – $75.99
- Dust Cap (22901302) – $12.09
What’s the price range for 1978 AMC Pacer Performance and Racing Products?
Performance and Racing Product prices for the 1978 AMC Pacer start at $7.69 and go up to $647.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1978 AMC Pacer?
The average price for Performance and Racing Products for the 1978 AMC Pacer is $142.24. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other AMC Pacer model years?
What are the cheapest Performance and Racing Products for my 1978 AMC Pacer?
The cheapest 1978 AMC Pacer Performance and Racing Products we carry in stock are:
- CUP (50206003) – $7.69
- Dust Cap (22901302) – $12.09
- Differential Pinion Solid Spacer Kit w/Shims (19640050) – $22.79
- High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
- Intake Manifold Gasket for 1967-1991 AMC 290-304-343; 360-390-401 (22342075) – $27.99
What types of Performance and Racing Products do you sell for my 1978 AMC Pacer?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1978 AMC Pacer:
Can I get help with 1978 AMC Pacer Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about AMC Performance and Racing Products and more.
What is your return policy for AMC Pacer Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new AMC Pacer Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
