Name: Master Overhaul Kit for Toyota 7.5" IFS Differential, V6
Brand: USA Standard Gear
SKU: 37111
Price: 363.99 USD

from

$363.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits reverse rotation Toyota 7.5″
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and silicone.

from

$99.99

Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.

Product Features:

Bearing race driver
Fits 30025 race
All steel construction

from

$26.99

Spartan spring & pin kit, fits smaller designs.

Product Features:

Replacement spring and pin kit for Spartan Locker
Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
Includes 4 springs and 4 alignment pins

from

$407.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes side shims and seals.

Product Features:

Fits standard rotation Toyota 7.5″ front with 6 cylinder engine
Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.

from

$6.99

Product Features:

PIN. NUT TOYOTA FRT&REAR

from

$14.29

Product Features:

Brand may vary by location

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$19.99

Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential

from

$129.78

Differential Bearing

from

$89.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$6.99

Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:

Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
5 needed

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$101.99

7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:

Carrier shim kit
Fits Toyota 7.5″

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$11.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$11.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$403.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality.

Product Features:

Fits Toyota V6 rear
4.11 ratio
29 spline pinion

from

$319.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Toyota V6 rear
8.125″ ring gear diameter
29 spline pinion
10 ring gear bolts
5.29 ratio

from

$20.99

Product Features:

CR SLE. TOY. 79-85 REAR 79 PRE. CU 4123139010

from

$13.99

Crush Sleeve for GM 55-62 car & truck and Toyota 8″. 2.510″ long.

Product Features:

Crush sleeve for 1955-1962 GM passenger car and Toyota 8″ with 4 cylinder engine
2.510″ tall

from

$10.99

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

from

$6.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$289.99

Differential Pinion

from

$295.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits standard rotation Toyota 7.5″ with 4 cylinder engine
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$679.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Toyota 8″ with 4 cylinder engine
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$549.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Toyota 8″ and V6
Made from 9310 steel for added strength
Works with stock side gears in standard carrier case

from

$669.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Toyota 7.5″
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

1977 Toyota Pickup Differentials

More 1977 Toyota Pickup Differentials

Essential 1977 Toyota Pickup Differentials

USA Standard Gear – Master Overhaul Kit for Toyota 7.5" IFS Differential, V6 (Part No.37111)

Yukon Gear – Bearing Race Driver (Part No.56004)

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Yukon Gear – Master Overhaul Kit For Toyota 7.5" IFS Differential, V6 (Part No.14176)

Motive Gear – Differential Pinion Nut (Part No.1504)

Driveworks – Tapered Roller Bearing (Part No.S-30306)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)

Koyo – Differential Bearing (Part No.J7060163891KOY)

National – Bearings (Part No.30025)

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – Carrier Shim Kit For Toyota 7.5" (Part No.55038)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Felpro – Differential Carrier Gasket (Part No.RDS 55430)

Felpro – Differential Carrier Gasket (Part No.RDS 55429)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 4.11 Ratio (Part No.24619)

USA Standard Gear – Ring & Pinion Gear Set For Toyota V6 In A 5.29 Ratio, 29 Spline Pinion (Part No.36308)

Motive Gear – Differential Crush Sleeve (Part No.3114)

Yukon Gear – Crush Sleeve (Part No.33101)

Yukon Gear – Outer Oil Slinger (Part No.33025)

National – Bearings (Part No.LM102910)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Yukon Gear – Differential Pinion (Part No.13111)

Yukon Gear – Pinion Install Kit For Toyota 7.5" IFS Differential (Four Cylinder Only) (Part No.13086)

USA Standard Gear – Spartan Locker for Toyota 8" Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17015)

USA Standard Gear – Spartan Locker For Toyota V6 With 30 Spline Axles (Part No.17034)

USA Standard Gear – Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17014)

Popular 1977 Toyota Pickup Differentials Categories

1977 Toyota Pickup Differentials

Differentials Brands To Make Your 1977 Toyota Pickup Last

Popular National Differentials

FAQs for 1977 Toyota Pickup Differentials

What are the most purchased Differentials for the 1977 Toyota Pickup?

What are the top-rated 1977 Toyota Pickup Differentials?

More Popular Parts for All Makes