1977 Toyota Pickup Drivetrains
More 1977 Toyota Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1977 Toyota Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1977 Toyota Pickup Drivetrains
Yukon Gear – Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear (Part No.10044)
from
$294.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (inner and outer seals) for Toyota 7.5″, 8″, and V6 rear. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Toyota 7.5″, 8″ and V6 rear
- Includes axle bearing, inner and outer axle seals and snap ring
- This kit will not work with ABS applications
- Services one side
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.710319)
from
$8.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)
from
$6.99
Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).
Product Features:
See More
Product Features:
- Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
- 5 needed
Driveworks – Taper Bearing Cup (Part No.S-JLM-104910)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Yukon Gear – Toyota 7.5 Pinion Nut (Part No.33155)
from
$9.99
Toyota 7.5 pinion nut (M18x1.5).
Product Features:
See More
Product Features:
- Pinion nut for Toyota 7.5″
- 18mm x 1.5 thread
Driveworks – Tapered Roller Bearing (Part No.S-30306)
Dorman – Spindle Nut M22-1.50 Hex Star Pattern (sold by each) (Part No.615-224)
from
$8.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Inner Stub Shaft Bearing For Toyota 7.5" IFS (Part No.18061)
Milemarker – Hub Conversion Kit (Part No.95-29918)
Driveworks – Oil Seal (Part No.S-1177)
from
$9.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Differential Carrier Gasket (Part No.RDS 55430)
from
$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Steel Spool For Toyota 8" 4 Cylinder (Part No.32050)
from
$309.99
Yukon Performance 1-11/16″ deck steel spool for Toyota 8″ truck with 30 spline axles. Uses 1.785″ journals. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Foyota 8″ with 4 cylinder engine
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Bearing Race Driver (Part No.56005)
from
$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30306 race
- All steel construction
Motive Gear – Differential Ring and Pinion (Part No.T529V6)
Rugged Ridge – Locking Hub (Part No.15001.21)
from
$244.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Dorman – Spindle Nut M20-1.5 Hex Size 30mm (sold by each) (Part No.615-102)
from
$2.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Crush Sleeve Eliminator Kit For Toyota V6 (Part No.55053)
from
$59.99
V6 Toyota solid crush sleeve replacement spacer kit, preload.
Product Features:
See More
Product Features:
- Crush sleeve eliminator kit for Toyota V6
NTN – Differential Pinion (Part No.J7020164790NTN)
from
$120.81
Differential Pinion
USA Standard Gear – Master Overhaul Kit for Toyota 7.5" IFS Differential, V6 (Part No.37110)
from
$344.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. .
Product Features:
See More
Product Features:
- Fits reverse rotation Toyota 7.5″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
Yukon Gear – Bearing Install Kit For Toyota 7.5" (With Four-Cylinder Only) IFS Differential (Part No.11086)
from
$344.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota 7.5″ front with 4 cylinder engine
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
Popular 1977 Toyota Pickup Drivetrains Categories
1977 Toyota Pickup Drivetrains
You count on your 1977 Toyota Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 48 Drivetrains ranging in price from $2.29 to $883.99, you’re sure to find everything you need for your 1977 Toyota Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 10 different brands like National, Yukon Gear, and Dorman. 1977 Toyota Pickup Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 48 extensive product reviews on 1977 Toyota Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Tapered Roller Bearing with 4.0 stars and Toyota 7.5 Pinion Nut with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1977 Toyota Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1977 Toyota Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Toyota Pickup running right for years to come. In our inventory you’ll find brands like National, Yukon Gear, Dorman, and even more.
Popular National Drivetrains
You’ll find popular National brand products across Differentials. All are waiting to get your 1977 Toyota Pickup back on the road. Some of the top-rated National products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1977 Toyota Pickup, and some of our most reviewed National parts include:
FAQs for 1977 Toyota Pickup Drivetrains
What are the most purchased Drivetrains for the 1977 Toyota Pickup?
Out of 48 Drivetrains for the 1977 Toyota Pickup, the most popular in our inventory are:
from
$23.99
This product is not rated
Inner Axle Seal For 7.5", 8" And V6 Toyota Rear
Axle Shaft Seals
What are the top-rated 1977 Toyota Pickup Drivetrains?
Top-rated Drivetrains for your 1977 Toyota Pickup based on customer reviews/ratings are:
from
$14.29
(1)
Tapered Roller Bearing
“Replaced original OEM shocks and the ride is better than when my 2007 Hyundai Entourage was brand new.”
from
$9.99
(1)
Toyota 7.5 Pinion Nut
“Matches OEM nut from 1995 Toyota base model 2wd pickup with 7.5″ rear diff.
The casting was not as good as original, it had ripples on the mounting ”
