1977 Porsche 911 Cooling and Climate Controls
More 1977 Porsche 911 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1977 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1977 Porsche 911 Cooling and Climate Controls
Elring – Water Pump Gasket (Part No.G3040160843ELR)
from
$15.88
Water Pump Gasket
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Original Equipment – Heater Control Swive (Part No.R3075947699OEA)
from
$2.60
Heater Control Swive
Ranco – Air Conditioning Temperature Switch (Part No.R1055132743RAN)
from
$81.77
Air Conditioning Temperature Switch
Factory Air – New York & Tec 206,209,210,HG850,HG1000 Clutch Assembly w/ Coil (Part No.47531)
from
$171.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All mounting hardware included
- Every coil tested for proper ohms
- Vehicle specific applications
- Coated to prevent corrosion
Dansk – Heater Valve (Part No.R302022615DSK)
from
$395.26
Heater Valve
Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA2297)
from
$315.99
Engine Coolant Temperature Sender
APA/URO Parts – Cooling Fan Pulley (Part No.G505232699APA)
from
$83.55
Cooling Fan Pulley
Mahle – Oil Thermostat (Part No.A633097561MAH)
from
$514.77
Oil Thermostat
Carquest Premium – Blower Motor: With Wheel (Part No.75810)
from
$172.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Autopart International Inc – Blower Motor (Part No.R20311984364API)
from
$63.95
Blower Motor
Factory Air – Carbon Shaft Seal Kit (Part No.24021)
from
$26.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Original Equipment – Heater Cable (Part No.R3048669078OEA)
from
$21.92
Heater Cable
National – Bearings (Part No.5000-KFF)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.206-FF)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Original Equipment – Heater Valve Cable (Part No.R201754110OEA)
from
$23.79
Heater Valve Cable
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Factory Air – Green Round O-Ring (Part No.24608)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Nissens – A/C Compressor w/ Clutch, New (Part No.R1000660875NSS)
from
$710.96
Maximum performance and durability in climate powering Nissens compressors are high-quality products that are designed and manufactured according to the highest quality and OE standards. The products are thoroughly tested in Nissens advanced test center to ensure maximum compression performance, long durability and a minimum of noise. Furthermore, the optimal design of Nissens compressors guarantees an ideal fit on the vehicle, permitting a smooth and easy installation process. Why opt for Nissens compressors?
Product Features:
See More
Product Features:
- Maximum performance and durability in climate powering
- Excellent quality designed and manufactured to match the OE standards 100%
- Perfect finish of all components snap rings, bearings, pistons, scrolls, valves/shaft, swash plate/clutch
- Unique reliability thorough durability and performance tests: real life test and sterile test series
- Minimized noise and vibration level
- Perfect fit and easy installation
- User-friendly installation guide included in the product warranty brochure
- Well-packed products ensuring protection from transport damage First fit on Nissens compressors
- Pre-filled with the right type of PAG lubricant offering the right viscosity and amount
- Equipped with O-rings
- Equipped with electrical adaptors (Multi Fit applications)
- Equipped with pre-filters (whenever needed)
Carquest Premium – New Compressor New York 209-210 (Part No.T58057)
from
$354.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Validated for fit, form, and function to OE standards
Carquest Premium – A/C Filter Drier w/ Pad Mount (Part No.T33592)
from
$26.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Filter Drier w/ Pad Mount (Part No.T83278)
from
$19.29
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
ACM – ACM A/C Receiver Drier (Part No.R1040115498ACM)
from
$39.51
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application.
- Meets or exceeds the vehicle manufacturer specifications.
- Utilizes factory style fittings and connectors.
- Includes the required o-rings and associated hardware
Original Equipment – Heater Blower Hose (Part No.H1015399678OEA)
from
$43.82
Heater Blower Hose
Popular 1977 Porsche 911 Cooling and Climate Controls Categories
1977 Porsche 911 Cooling and Climate Controls
You count on your 1977 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 30 Cooling and Climate Controls ranging in price from $0.99 to $621.70, you’re sure to find everything you need for your 1977 Porsche 911.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 12 different brands like Permatex, Factory Air, and National. 1977 Porsche 911 Cooling and Climate Controls start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 806 extensive product reviews on 1977 Porsche 911 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Bearings with 2.3 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1977 Porsche 911 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1977 Porsche 911
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Porsche 911 running right for years to come. In our inventory you’ll find brands like Permatex, Factory Air, National, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1977 Porsche 911 back on the road. Some of the top-rated Permatex products in these categories are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1977 Porsche 911, and some of our most reviewed parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
FAQs for 1977 Porsche 911 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1977 Porsche 911?
Out of 30 Cooling and Climate Controls for the 1977 Porsche 911, the most popular in our inventory are:
What are the top-rated 1977 Porsche 911 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1977 Porsche 911 based on customer reviews/ratings are:
from
$17.99
(3)
Bearings
“This bearing was a perfect fit for use with the intermediate drive shaft on a 2009 Chev. Malibu with 2.4L engine and 6-spd. auto trans. (LE5 with MH8)”
