1977 Pontiac Firebird Fuel and Emissions Systems

Name: Secondary Air Injection Pump Check Valve
Brand: Carquest Premium
SKU: CVC1001
Price: 39.99 USD

Below you will find various in-demand Pontiac Fuel and Emissions Systems, components and accessories for your 1977 Firebird. Advance Auto Parts has popular Firebird parts like Fuel Tanks, Fuel Injectors, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Firebird model years including 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 and more. Select a category of 1977 Pontiac Firebird Fuel and Emissions Systems below and start saving instantly.

Popular 1977 Pontiac Firebird Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

Fuel Tank Filler Necks

Fuel Tank Sending Units

Fuel Pump Pushrods

Exhaust Check Valves

EGR Valve Gaskets

Fuel Pump Block-Off Plates

Fuel Injection System

Fuel Cap Tester Adapters

Essential Fuel and Emissions Systems for 1977 Pontiac Firebirds

from

$39.99

The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$222.99

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:

Black AnodizedFinish
High Capacity Fuel Rails
For Use W/ Pro-Flo XT Manifold #7137
-6 AN Inlet / Outlet
Made In The USA

from

$61.99

Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$36.99

Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:

Black Anodized Finish
Billet Aluminum Material
Mounting Hardware Included
Includes 1.5 mm Gasket
For Small-Block Chevy

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$1.29

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$15.49

Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:

Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles
Ideal solution – this rod is a reliable replacement for an original part that has failed
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.99

Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features:

Chrome Plated Steel
Comes With Gasket

from

$10.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$27.99

This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$69.99

New Goodmark Driver Side Fuel Tank Brace, Made Of Steel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$169.99

The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:

Application matched components ensure the vehicle will be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Features application specific mounting bracket and accessories as the dealer purchased part provides ease of installation.
Canister carbon volumn equal to original equipment providing maximum hydrocarbon emission control.

from

$168.99

This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:

Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$2591.99

The Edelbrock Pro-Flo 4 XT EFI Kit No. 35980 for Pontiac 326-455 C.I. engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

Product Features:

The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet

from

$88.99

Product Features:

EGR Adapter
Clears OEM Intake
Includes Gaskets and Bolts

from

$275.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Lock ring included with each tank to reduce installation time and to ensure a complete repair
Made with corrosion resistant, OE approved, Ni Terne steel for durability
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

from

$661.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium classic injection fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Application specific design ensure a perfect fit guarantee
OEM, fit, form and function paired with todays fuel injection technology
Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
Proudly manufactured in Canada under stringent quality systems (ISO 9002)
Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks

from

$121.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$139.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs

from

$114.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$120.99

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$54.99

New Goodmark Fuel Filler Neck

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$62.99

New Platinum Pro Fuel Pump Module

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$205.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

Upgrade your 1977 Pontiac Firebird with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1977 Pontiac Firebird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Firebird functioning at its best. At Advance Auto Parts, we offer a wide selection of 60 Fuel and Emissions Systems for the 1977 Pontiac Firebird, designed to meet your needs without breaking the bank. From Fuel Tank replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1977 Pontiac Firebird at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.29 to $2,591.99, with an average price of $118.29. Our 60 Fuel and Emissions Systems in stock come from 11 trusted brands, so you’re sure to find the right part for your 1977 Pontiac Firebird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1977 Pontiac Firebird, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, Carquest Premium, Dorman, and more. FELPRO Fuel and Emissions Systems start at just $2.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Fuel and Emissions Systems available starting at $11.99, and at an average 4.4 stars rating. With 8,903 customer reviews and counting, our 1977 Pontiac Firebird Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1977 Pontiac Firebird is always ready to roll. We’re committed to providing you with everything you need to keep your Firebird in top shape, all in one place. Start shopping confidently below for your 1977 Pontiac Firebird!

Best-Selling Fuel Tanks for 1977 Pontiac Firebirds

Enhance the driving experience in your Pontiac with 10 quality Fuel Tank components, starting at $12.49.

show more show less

from

$12.49

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$139.99

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs

from

$45.99

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$274.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$54.99

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$99.99

Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:

Meets or exceeds OE specifications for fit, form and function
All sending units are 100% performance tested
Includes installation gaskets or seals where applicable

from

$56.99

New Platinum Pro Fuel Tank Straps

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$253.99

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Lock ring included with each tank to reduce installation time and to ensure a complete repair
Made with corrosion resistant, OE approved, Ni Terne steel for durability
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

from

$218.99

1974-81 CHEVY CAMARO/FIREBIRD FT

from

$98.99

New Platinum Pro Fuel Sending Unit, 76-81 Fbird, With Ac, Pump Not Includes

Product Features:

76-81 Fbird, With A/C, Pump Not Included
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Most Popular 1977 Pontiac Firebird Fuel Injectors

Customize your Pontiac with 2 Fuel Injectors products like Fuel Injection System, all priced under $2,591.99.

show more show less

from

$2591.99

The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet

Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35970 For Pontiac V8 326-455

from

$2591.99

The Edelbrock Pro-Flo 4 XT EFI Kit No. 35970 for Pontiac 326-455 C.I. engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

Top Picks for 1977 Pontiac Firebird Fuel Pumps

Upgrade Pontiac Firebirds with top-quality Fuel Pumps parts, including 21 OEM and aftermarket selections for your 1977 model.

show more show less

from

$15.49

Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles
Ideal solution – this rod is a reliable replacement for an original part that has failed
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$38.49

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$161.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

High Output Fuel Flow
Flows 110 gph Free Flow
Shutoff Pressure Pre-Set From 6.5 To 8 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT
Inlet/Outlet Tapped For 3/8 in. NPT

from

$177.99

Product Features:

Unique Valve Design
Improves Flow Quantity/Quality
Supports Engines Up To 550 HP
Hi-Vol 0.375 in. NPT Inlet/Outlet
Produces 6 psi
Gasoline Or Mixed Fuels Only

from

$69.99

Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:

Solid-state Worry Free Electronics
Internal Pressure Regulating
Universal Design Allows For Easy Installation
No DiaphraGMs Or Mechanical Parts To Wear Out
They Make An Excellent Fuel Transfer or Booster Pump
Not designed for use on aircraft of any type.
Hose Barbs Fit 5/16″ Fuel Hose
Self-priming, 2 wire design
Eliminates vapor lock and flooding

from

$22.99

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$35.99

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$30.99

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$29.99

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$13.99

Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:

Nominally Rated At 170,000 PSI Tensile Strength
Properly Aligned
Conventional Hex Heads
Rust-Proof Stainless Bolts
170,000 PSI

from

$181.99

High Output Fuel Flow
Flows 130 gph Free Flow
Shutoff Pressure Pre-Set From 7.5 To 9 PSI
Fuel Pressure Regulator Required Recommend P/N 12-704
Heavy Duty Construction For Continuous High rpm Operation
Redesigned High Flow Valves Ensure Adequate Fuel Delivery
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT

from

$27.99

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$3.99

Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$18.99

Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features:

Chrome Plated Steel
Comes With Gasket

from

$183.99

High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:

Hi-Vol 0.5 in. NPT Inlet/Outlet
Large Alcohol-Proof Diaphragm
Aircraft-Type Allen Bolts
Produces 10 psi
For Gasoline Only
Finest Quality Material
Beautifully Detailed
Use w/Fuel Pressure Regulator PN[8190]

from

$62.99

New Platinum Pro Fuel Pump Module

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$36.99

Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:

Black Anodized Finish
Billet Aluminum Material
Mounting Hardware Included
Includes 1.5 mm Gasket
For Small-Block Chevy

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$28.99

Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:

Made From Premium Grade Aerospace Chrome Moly
Center Less Ground To Precise Diameter
Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
Provide With Required Reliability And Improved Performance

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$8.99

Nominally Rated At 170,000 PSI Tensile Strength
Properly Aligned
Considerably Stronger
Black Oxide Finished Chrome Moly
170,000 PSI

In-Demand Gas Caps for 1977 Pontiac Firebirds

Select from 13 premium Gas Caps parts for your 1977 Pontiac Firebird, with prices ranging from $7.99 to $24.99.

show more show less

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Sold 1977 Pontiac Firebird Vapor Canister Purge Valves

Explore our best-selling Pontiac parts for the 1977 Firebird among 1 OEM and aftermarket options starting from $169.99.

show more show less

from

$169.99

Application matched components ensure the vehicle will be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Features application specific mounting bracket and accessories as the dealer purchased part provides ease of installation.
Canister carbon volumn equal to original equipment providing maximum hydrocarbon emission control.

Top-Rated Fuel and Emissions Systems Brands For Your 1977 Pontiac Firebird

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1977 Pontiac Firebirds. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, Carquest Premium, and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 1977 Firebird start at just $2.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1977 Pontiac Firebird Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1977 Pontiac Firebird, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 1977 Pontiac Firebird. With over 1 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99. Plus, with over 27 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $2.99

(27)

Exhaust Gas Recirculation (EGR) Valve Gasket

“So I had to replace this when I pulled the EGR to replace the cam plug seal. Easy enough. Just make sure both mating surfaces are plenty clean to ensu”

Popular Carquest Premium 1977 Pontiac Firebird Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1977 Pontiac Firebird owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1977 Firebird, Advance Auto Parts carries a full inventory of 3 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $11.99 to $38.49, plus, with more than 41 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $11.99

(3)

Keyed Alike Locking Fuel Cap

“Worked fine”

from $14.99

(37)

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack

“Works Great”

from $38.49

(1)

Mechanical Fuel Pump 3541159: Includes Gasket

“parts fits like a glove”

FAQs for 1977 Pontiac Firebird Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1977 Pontiac Firebirds?

Out of 60 Fuel and Emissions Systems that fit 1977 Pontiac Firebirds, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Non-Locking Tethered Fuel Tank Cap (12102600) – $24.29
Mechanical Fuel Pump 160574: Includes Gasket (11763923) – $22.99

What’s the price range for 1977 Pontiac Firebird Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1977 Pontiac Firebird start at $1.29 and go up to $2,591.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1977 Pontiac Firebird?

The average price for Fuel and Emissions Systems for the 1977 Pontiac Firebird is $118.29. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Pontiac Firebird model years?

Yes, we currently carry Fuel and Emissions Systems for 34 model years of Pontiac Firebirds between 1967 and 2002. Fuel and Emissions Systems are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, and 1994.

What are the cheapest Fuel and Emissions Systems for my 1977 Pontiac Firebird?

The cheapest 1977 Pontiac Firebird Fuel and Emissions Systems we carry in stock are:

Exhaust Gas Recirculation (EGR) Valve Gasket (12482002) – $1.29
Exhaust Gas Recirculation (EGR) Valve Gasket (12481993) – $1.49
Exhaust Gas Recirculation (EGR) Valve Gasket (12481912) – $1.49
Exhaust Gas Recirculation (EGR) Valve Gasket (3207781) – $2.99
Exhaust Gas Recirculation (EGR) Valve Gasket (3207897) – $3.29

What are the top-rated Fuel and Emissions Systems that fit the 1977 Pontiac Firebird?

Out of 8,903 reviews by customers, our 1977 Pontiac Firebird Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1977 Pontiac Firebird and their top-rated products:

Exhaust Gas Recirculation (EGR) Parts
- Exhaust Gas Recirculation (EGR) Valve Gasket (3207781) – $2.99

What types of Fuel and Emissions Systems do you sell for my 1977 Pontiac Firebird?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1977 Pontiac Firebird:

Can I get help with 1977 Pontiac Firebird Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Fuel and Emissions Systems and more.

What is your return policy for Pontiac Firebird Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Pontiac Firebird Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1977 Pontiac Firebird Fuel and Emissions Systems

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Carquest Premium – EGR Valve (Part No.EGC1236)

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1062)

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

Carquest Premium – Fuel Cap (Part No.10807)

Dorman – Help – Vacuum Storage Canister (Part No.47076)

Dorman – Help – Vacuum Storage Canister (Part No.47077)

Dorman – Fuel Tank Strap Set (Part No.578-056)

KAI – Fuel Tank Brace (Part No.GMK402074569L)

Carquest Premium – Vapor Canister (Part No.CPG1187)

Dorman – Evaporative Emissions Charcoal Canister (Part No.911-264)

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35980 For Pontiac V8 326-455 (Part No.35980)

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

Spectra Premium – Fuel Tank (Part No.GM32A)

Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM32AFI)

Dorman – Fuel Sending Unit without Pump (Part No.692-122)

Spectra Premium – Fuel Tank Sending Unit (Part No.FG103C)

Spectra Premium – Fuel Filler Neck (Part No.FN99)

Spectra Premium – Fuel Filler Neck (Part No.FN21)

KAI – Fuel Filler Neck (Part No.GMK402075367)

Carquest Premium – Mechanical Fuel Pump 160574: Includes Gasket (Part No.160574)

KAI – Fuel Pump Module Assembly (Part No.FMD010083)

Delphi – Fuel Pump and Strainer Set: With Seal, Rubber Fitting (Part No.HP10034)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Spectra Premium – Fuel Tank Sending Unit (Part No.FG103C)

Dorman – Fuel Tank Strap Coated For Rust Prevention (Part No.578-047)

Dorman – Fuel Tank with Lock Ring and Seal (Part No.576-403)

Spectra Premium – Fuel Filler Neck (Part No.FN03)

Carquest Premium – Fuel Tank Sending Unit FG103CCQ: Includes Wiring Harness (Part No.FG103CCQ)

KAI – Fuel Tank Strap (Part No.FST010047)

Spectra Premium – Fuel Tank (Part No.GM2)

Holley – 1974-81 CHEVY CAMARO/FIREBIRD FT (Part No.19-504)

KAI – Fuel Sending Unit (Part No.FSU010127)

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35980 For Pontiac V8 326-455 (Part No.35980)

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35970 For Pontiac V8 326-455 (Part No.35970)

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Carquest Premium – Mechanical Fuel Pump 3541159: Includes Gasket (Part No.3541159)

Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)

Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Carquest Premium – Mechanical Fuel Pump 160574: Includes Gasket (Part No.160574)

Carquest Premium – Mechanical Fuel Pump 360579: Includes Gasket (Part No.360579)

Carquest Premium – Mechanical Fuel Pump 2541130: Includes Gasket (Part No.2541130)

Carquest Premium – Mechanical Fuel Pump 3542639: Includes Gasket (Part No.3542639)

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

Holley – Mechanical Fuel Pump (Part No.12-327-13)

Carquest Premium – Mechanical Fuel Pump 260575: Includes Gasket (Part No.260575)

Carquest Premium – Fuel Pump Push Rod PR2584015 (Part No.PR2584015)

Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)

KAI – Fuel Pump Module Assembly (Part No.FMD010083)

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

ARP Auto Racing – For Use With Pontiac, 12 Point Head Type, Black Oxide, Chrome Moly, With Washers (Part No.190-1601)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)

Carquest Premium – Locking Fuel Tank Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Tank Cap (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17505)

Carquest Premium – Vapor Canister (Part No.CPG1187)