1977 Oldsmobile 98 Exhaust Parts
Find Your Specific 1977 Oldsmobile 98 Exhaust Parts
Below you will find various in-demand Oldsmobile Exhaust Parts, components and accessories for your 1977 98. Advance Auto Parts has popular 98 parts like Catalytic Converters, Exhaust Mufflers, Exhaust Hangers and more. You’ll also find aftermarket and OEM Exhaust Parts for other 98 model years including
1988,
1989,
1990,
1991,
1992,
1993,
1994,
1995,
1996 and more. Select a category of 1977 Oldsmobile 98 Exhaust Parts below and start saving instantly.
Popular 1977 Oldsmobile 98 Exhaust Parts Categories
Essential Exhaust Parts for 1977 Oldsmobile 98s
Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.18235)
from
$81.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
BRExhaust – Exhaust Muffler (Part No.100-5053)
from
$161.99
This BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.
See More
Walker – Exhaust Flange (Part No.31865)
from
$15.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Flange (Part No.31882)
from
$17.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35723)
from
$36.99
Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broad market, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
Product Features:
See More
Product Features:
- Walker offers a variety of clamp styles and sizes for your installation needs
- Helps to ensure a leak-free connection
- Constructed from durable and robust material for long life
- New Walker accessories help to ensure effective exhaust repairs
- Walker supplies all of the accessories you need to do the complete exhaust job
Dorman – Help – Exhaust Flange Spring-0.825 OD x 1.135 ID x 1.57 and 0.5 ID X .75 x OD 1.13 In. (Part No.03084)
from
$7.99
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust spring matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust System Hanger (Part No.35148)
from
$15.49
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE DESIGN – Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Universal Exhaust Resonator 2.25" Inlet (ID) 2.25" Outlet (ID) 2.25" Outlet (OD) (Part No.17812)
from
$48.49
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound
- FLEXIBLE SOLUTION – Customizable design for easy fitment and may require specialized fabrication and/or welding for installation
- STRONG and DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR – Engineered to fit, perform and sound like the original system
Walker – Direct Fit Exhaust Resonator, 2.25" Inlet (ID) 2.25" Outlet (ID) 2.25" Outlet (OD) (Part No.21687)
from
$52.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION : Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND : OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound
- FLEXIBLE SOLUTION : Customizable design for easy fitment and may require specialized fabrication and/or welding for installation
- STRONG AND DURABLE : Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR : Engineered to fit, perform and sound like the original system
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.41206)
from
$23.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Tail Pipe 2.25" Outlet (OD) (Part No.46550)
from
$67.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.44596)
from
$50.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66041)
from
$48.99
Seal-4-Good Header Flange Gasket
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5945)
from
$44.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Has A Steel Core With Graphite Facing
- Graphite Facing Has Excellent Thermo-conductivity
- High Recovery Mat Allows For Better Seal Retention
- Can Be Trimmed For Port Modifications
MAHLE Original – Exhaust Manifold Set (Part No.MS16108)
from
$20.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
MagnaFlow – Standard Grade Universal Catalytic Converter – 2.25" (Part No.94015)
from
$126.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94015 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter (Part No.81326)
from
$387.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s emissions and structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – CalCat CARB Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.81126)
from
$419.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
Felpro – Exhaust Pipe Flange Gasket (Part No.60240)
from
$13.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60299)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61009)
from
$10.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60650)
from
$15.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Exhaust Bolt and Spring (Part No.36463)
from
$20.99
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE – Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION – Designed to be used for ball and socket joint
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Upgrade your 1977 Oldsmobile 98 with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1977 Oldsmobile 98, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Exhaust Parts are key to keeping your 98 functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Exhaust Parts for the 1977 Oldsmobile 98, designed to meet your needs without breaking the bank.
From
Catalytic Converter
replacements to
Exhaust Mufflers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1977 Oldsmobile 98 at great prices.
Our Exhaust Parts inventory for this model
ranges from just $2.99 to $560.99, with
an average price of $111.92.
Our 28 Exhaust Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 1977 Oldsmobile 98 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1977 Oldsmobile 98, we stock popular OEM and aftermarket Exhaust Parts from top names
like FELPRO Walker, and more.
FELPRO Exhaust Parts
start at just $12.79 and boast an impressive 4.6 stars average rating from customers.
With 38 customer reviews and counting, our 1977 Oldsmobile 98 Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1977 Oldsmobile 98 is always ready to roll. We’re committed to providing you with everything you need to keep your 98 in top shape, all in one place.
Start shopping confidently below for your 1977 Oldsmobile 98!
Best-Selling Catalytic Converters for 1977 Oldsmobile 98s
Enhance the driving experience in your Oldsmobile with 7 quality Catalytic Converter components, starting at $111.99.
Walker – Standard EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.15038)
from
$111.99
Product Features:
See More
- EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Standard Grade Universal Catalytic Converter – 2.50" (Part No.94016)
from
$126.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94016 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.81128)
from
$516.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
MagnaFlow – California Universal Catalytic Converter – 2.50" (Part No.3322306)
from
$560.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322306. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter (Part No.81328)
from
$396.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s emissions and structural integrity warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Direct-Fit Standard Grade Catalytic Converter (Part No.93431)
from
$333.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93431 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1977-1980 Cadillac DeVille, 1977-1980 Chevrolet Impala, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Walker – CalCat Universal Catalytic Converter (Part No.80828)
from
$182.99
Walker an industry leader for import And domestic applications, offers Walker CalCat Universal Catalytic Converters, available for OBDII (1996 And newer) vehicles And Pre-OBD (1995 And older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker CalCat Catalytic Converters are legal for sale in the state of California, And any state complying with California regulations.
Product Features:
See More
Product Features:
- Legal for sale in the state of California, complies with C.A.R.B. regulations
- Stainless steel body with aluminized pipe and heat shields for durability
- Expandable bushings for custom installation requirements
- Universal converter may require modification to complete installation
Most Popular 1977 Oldsmobile 98 Exhaust Mufflers
Customize your Oldsmobile with 4 Exhaust Mufflers products
like Mufflers, all
priced under $81.99.
Walker – Sound Solution Exhaust Muffler (Part No.18695)
from
$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.18235)
from
$81.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18141)
from
$61.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
BRExhaust – Exhaust Muffler (Part No.100-1775)
from
$58.99
This BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.
See More
Top Picks for 1977 Oldsmobile 98 Exhaust Hangers
Upgrade Oldsmobile 98s with top-quality Exhaust Hangers parts, including 1 OEM and aftermarket selections for your 1977 model.
Dorman – Help – Exhaust Flange Spring-0.825 OD x 1.135 ID x 1.57 and 0.5 ID X .75 x OD 1.13 In. (Part No.03084)
from
$7.99
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust spring matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
In-Demand Exhaust Pipes for 1977 Oldsmobile 98s
Select from 6 premium Exhaust Pipes parts for your 1977 Oldsmobile 98, with prices ranging from $13.29 to $75.99.
Walker – Exhaust Tail Pipe 2.25" Outlet (OD) (Part No.46550)
from
$67.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Felpro – Exhaust Pipe Flange Gasket (Part No.60240)
from
$13.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Direct Fit Exhaust Resonator 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.21992)
from
$75.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound
- FLEXIBLE SOLUTION – Customizable design for easy fitment and may require specialized fabrication and welding for installation
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR – Engineered to fit, perform and sound like the original system
Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.44596)
from
$50.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Universal Exhaust Resonator 2" Inlet (ID) 2" Outlet (ID) 2" Outlet (OD) (Part No.17852)
from
$48.49
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound
- FLEXIBLE SOLUTION – Customizable design for easy fitment and may require specialized fabrication and welding for installation
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR – Engineered to fit, perform and sound like the original system
Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.41206)
from
$23.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Most Sold 1977 Oldsmobile 98 Exhaust Fittings
Explore our best-selling Oldsmobile parts for the 1977 98 among 5 OEM and aftermarket options starting from $2.99.
Walker – Exhaust Flange (Part No.31865)
from
$15.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Bracket (Part No.35662)
from
$13.29
Complete your exhaust repair with Walker brackets. Designed to support undercar exhaust components, Walker brackets are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- COMPATIBILITY – Works seamlessly with OE and Walker aftermarket replacement parts
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Top-Rated Exhaust Parts Brands For Your 1977 Oldsmobile 98
Shop for the best-rated brands offering Exhaust Parts and other products for your 1977 Oldsmobile 98s. Below you’ll find some of our best rated Exhaust Parts from FELPRO and Walker, and more. Exhaust Parts from these brands that fit a 1977 98 start at just $12.79 and are rated as high as 4.6 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 1977 Oldsmobile 98 Exhaust Parts
When it comes to maintaining or upgrading your 1977 Oldsmobile 98, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 1977 Oldsmobile 98. With over 1 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.79. Plus, with over 1 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Walker 1977 Oldsmobile 98 Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 1977 Oldsmobile 98 owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 1977 98, Advance Auto Parts carries a full inventory of 3 Walker Exhaust Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Walker Exhaust Parts range from $20.99 to $111.99, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$67.99
(1)
Exhaust Tail Pipe 2.25" Outlet (OD)
“This went on an ’86 Pontiac and perfect fit. Also, it was made in USA…..(where’s that?)”
from
$111.99
(1)
Standard EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID)
“Great part! It was easy to install and gives the truck a good mellow sound. I’m not sure if there is any real performance improvement, but for the pr”
FAQs for 1977 Oldsmobile 98 Exhaust Parts
Which Exhaust Parts are best-sellers for 1977 Oldsmobile 98s?
Out of 28 Exhaust Parts that fit 1977 Oldsmobile 98s, the following parts are the top sellers:
- Standard EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (5386926) – $111.99
- Terminator; Exhaust Tips (19310030) – $93.99
- Exhaust Flange (5600928) – $15.49
What’s the price range for 1977 Oldsmobile 98 Exhaust Parts?
Exhaust Part prices for the 1977 Oldsmobile 98 start at $2.99 and go up to $560.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1977 Oldsmobile 98?
The average price for Exhaust Parts for the 1977 Oldsmobile 98 is $111.92. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Oldsmobile 98 model years?
What are the cheapest Exhaust Parts for my 1977 Oldsmobile 98?
The cheapest 1977 Oldsmobile 98 Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012137) – $2.99
- Exhaust Clamp (11012223) – $2.99
- Exhaust Flange Spring-0.825 OD x 1.135 ID x 1.57 and 0.5 ID X .75 x OD 1.13 In. (9110160) – $7.99
- Exhaust Clamp (11012146) – $8.99
- Exhaust Manifold Gasket Set (5186285) – $12.79
What are the top-rated Exhaust Parts that fit the 1977 Oldsmobile 98?
Out of 38 reviews by customers, our 1977 Oldsmobile 98 Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1977 Oldsmobile 98 and their top-rated products:
- Exhaust System Kits
- Exhaust Bolt and Spring (10044670) – $20.99
- Exhaust Gaskets
- Exhaust Bolt and Spring (10044670) – $20.99
What types of Exhaust Parts do you sell for my 1977 Oldsmobile 98?
As of 11/2/25, these are some of the most in-demand types of Exhaust Parts for a 1977 Oldsmobile 98:
Can I get help with 1977 Oldsmobile 98 Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Exhaust Parts and more.
What is your return policy for Oldsmobile 98 Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile 98 Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
