1977 Mercury Grand Marquis Performance Engines

Essential 1977 Mercury Grand Marquis Performance Engines

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Polished Finish (Part No.21211)

Performer 289 Intake Manifold for Small-Block Ford, Polished Finish

from

$579.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1248)

Lower Intake Manifold Gasket Set: 5 Piece Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

B & M – Torque Converter, Tork Master 2000 (Part No.40427)

Torque Converter, Tork Master 2000

from

$349.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2941)

Engine Crankshaft Seal Kit

from

$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PTFE offers the best in fluid and high-temperature compatibility and contact sealing surface can run on undersize shafts, seal minor imperfections and virtually eliminate shaft wear.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Valve Cover Gasket Set for Ford (Part No.7563)

Valve Cover Gasket Set for Ford

from

$60.99
Product Features:
  • Valve Cover Gasket
See More

Mr. Gasket – Water Neck (Part No.2662)

Water Neck

from

$19.99
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:
  • Chrome Plated
  • This Is A 45 Degree Neck
  • Comes With O-ring And Bolts
  • Has Small Hose Fitting On It
See More

Spectre – Water Neck (Part No.4232)

Water Neck

from

$23.99
Spectre’s Ford small block water neck fits 1965 – 19475 Ford 221, 289, 302 and 351W engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes the bolts and sealing O-ring, and also features a 1/2 inch outside diameter by-pass hose connection.

Product Features:
  • Fits 1965 – 19475 Ford 221, 289, 302 and 351W engines
  • Includes bolts and sealing O-ring
  • Has additional 1/2 inch by-pass hose fitting
  • Chrome plated
  • Designed for OEM fit
  • Easy to install
See More

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam for Ford 351W (Part No.35-250-4)

Xtreme Energy 240/246 Hydraulic Flat Cam for Ford 351W

from

$284.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam for Ford 221-302 (Part No.31-600-8)

Thumpr 227/241 Hydraulic Roller Cam for Ford 221-302

from

$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7365)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford

from

$186.99
Product Features:
  • Head: 4.500″ Bore/0.048″ Thick/12.5cc Vol.
  • Intake: 1.98″x2.26″ Port/.060″ Thick
  • Exhaust: 1.50″x2.10″ Port
  • 5/16″ Valve Cover
  • Multi Piece Configuration
See More

Competition Cams – VALVE SPRINGS, 1.509" DUAL 1 ST (Part No.924-16)

VALVE SPRINGS, 1.509" DUAL 1 ST

from

$788.99
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

Product Features:
  • Seat pressure: 112 lbs. @ 1.900″, Open Pressure: 355 lbs. @ 1.200″
  • O.D.: 1.509″, I.D.: 0.697″
  • Dual valve springs with damper
See More

Edelbrock – Sure Seat Valve Springs for Ford 351W V8 (Part No.5882)

Sure Seat Valve Springs for Ford 351W V8

from

$52.99
Product Features:
  • Non-Rotator Type
  • 1.384 in. Outer Diameter
  • 1.020 in. Inner Diameter
  • 1.020 in. Coil Blind
  • Set of 16
See More

Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8 (Part No.2167)

Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8

from

$368.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Performer-Plus camshaft for Small-Block Ford 351W V-8 applications (Part No.2182)

Performer-Plus camshaft for Small-Block Ford 351W V-8 applications

from

$339.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.793G)

Timing Cover Gasket Set

from

$20.99
Mr. Gasket Performance Timing Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

Edelbrock – Front Timing Cover Gasket Set #6991 For Small-Block Ford, With Front Seal (Part No.6991)

Front Timing Cover Gasket Set #6991 For Small-Block Ford, With Front Seal

from

$28.99
Available in kits including front cover gasket, crankshaft seal, fuel pump and water pump gasket or including cover gasket and front seal.

Product Features:
  • Timing Cover Gasket And Oil Seal Kit
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$38.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6683)

Ultra Seal: Oil Pan Gasket

from

$59.19
High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:
  • Steel core provides rigidity, durability and prevents gasket push out
  • Molded rubber coating seals minor irregularities in pan surface
  • One piece design is easier to install and even less prone to leak
  • Direct replacement suitable for all uses – street, racing, heavy duty
  • Include both gasket and new oil pan bolts
  • No Cork Particles
  • Easy Removal For Disassembly
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1809)

PERFORMANCE OIL PAN GASKET SET

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Water Pump #8845 For Small-Block Ford 1986-93, 5.0L V8, Rev. Rotation, Polished (Part No.8845)

Water Pump #8845 For Small-Block Ford 1986-93, 5.0L V8, Rev. Rotation, Polished

from

$461.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Polished Finish (Part No.8849)

Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Polished Finish

from

$451.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Satin Finish (Part No.8844)

Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Satin Finish

from

$315.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7811)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$75.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
  • For Engine w/ 2-piece Fuel Pump Eccentric or EFI
See More

Edelbrock – TIMING CHAIN (Part No.7844)

TIMING CHAIN

from

$29.99
Product Features:
  • Timing Chain Only
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7821)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$81.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
See More

1977 Mercury Grand Marquis Performance Engines

Maybe you’re in the middle of a full rebuild of that 1977 Mercury Grand Marquis. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 34 different Performance Engines in our inventory ranging from $20.99 to $788.99. That means you can find the exact parts or products you need to keep that 1977 Mercury Grand Marquis running smoothly.

Performance Engines are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Mercury Grand Marquis. Mr. Gasket, FEL-PRO Performance, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1977 Mercury Grand Marquis, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 25 reviews in this category, some of the top rated parts include Action +Plus; Intake Manifold with 3.5 stars and High-Rise Dual Plane Intake Manifold for Maximum Torque with 5.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1977 Mercury Grand Marquis rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1977 Mercury Grand Marquis Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Mercury Grand Marquis demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Marquis the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Engine Intake Manifold Gaskets categories, plus more. For a 1977 Mercury Grand Marquis, our most popular Edelbrock Performance Engines include:
Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions
from $28.99
(1)
Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions
Performance Engine Intake Manifold Gaskets

Top 1977 Mercury Grand Marquis Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1977 Mercury Grand Marquis. Popular Mr. Gasket parts include:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
Ultra Seal: Intake Gasket
from $42.99
(1)
Ultra Seal: Intake Gasket
Performance Engine Intake Manifold Gaskets

FAQs for 1977 Mercury Grand Marquis Performance Engines

What are the most purchased Performance Engines for the 1977 Mercury Grand Marquis?

Out of 34 Performance Engines for the 1977 Mercury Grand Marquis, the most popular in our inventory are:
High Performance Thermostat
from $27.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
Ultra Seal: Harmonic Balancer Bolt/Washer Kit
from $38.49
This product is not rated
Ultra Seal: Harmonic Balancer Bolt/Washer Kit
Performance Engine Harmonic Balancers
Lower Intake Manifold Gasket Set: 5 Piece Set
from $38.99
This product is not rated
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets

What are the top-rated 1977 Mercury Grand Marquis Performance Engines?

Top-rated Performance Engines for your 1977 Mercury Grand Marquis based on customer reviews/ratings are:
Action +Plus; Intake Manifold
from $349.99
(2)
Action +Plus; Intake Manifold
“Nice clean intake lookes better than edelbrock”
High-Rise Dual Plane Intake Manifold for Maximum Torque
from $359.99
(1)
High-Rise Dual Plane Intake Manifold for Maximum Torque
“used on my 1987 ford f-250 for a replacement, it was relatively light and easy to install, i have no complaints about it.”