1977 Jeep Wagoneer Drivetrains
More 1977 Jeep Wagoneer Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1977 Jeep Wagoneer, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1977 Jeep Wagoneer Drivetrains
Yukon Gear – Zip Locker Front Switch Cover (Part No.34009)
Felpro – DIFFERENTIAL GASKET (Part No.RDS 13089)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles (Part No.16086)
from
$892.99
Yukon replacement positraction internals for Dana 60 and 61 (full-floating) with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 60 with Trac Loc positraction with 30 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
USA Standard Gear – 4340 Chrome-Moly Replacement Axle Kit For ’80-’92 Jeep Wagoneer, Dana 44 (Part No.35066)
from
$899.99
Product Features:
See More
- 30 spline inner and 19 spline outer
- Fits Dana Spicer 44 in 1980-1992 Jeep Wagoneer
- Includes inner and outer 4340 Chromoly axles and Spicer U-Joints
Motive Gear – Differential Pinion Shim Kit (Part No.1114)
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Omix – Transfer Case Bearing (Part No.16560.57)
from
$47.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Spindle Bearing For Dana 44 (Part No.33493)
from
$23.99
Spindle bearing for Dana 44. This replaces Spicer part number 550759.
Product Features:
See More
Product Features:
- Spindle bearing
- Fits Dana Spicer 44
Driveworks – Needle Bearing (Part No.S-B-2110)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)
from
$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Axle Redi-sleeve
- Fits Dana Spicer 44
Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)
from
$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.
Product Features:
See More
Product Features:
- Axle stud for AMC Model 20 and Model 35
- 1/2″ x 20 thread
- 0.620″ knurl diameter
- 1.625″ long
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Yukon Gear – Set Up Bearing (Part No.56045)
from
$153.99
M802048 set-up bearing (one bearing). No return.
Product Features:
See More
Product Features:
- Set up bearing
- Fits M802048 pinion bearing
- Easily slips on and off pinion journal to allow for easier pinion depth adjustment
Driveworks – Tapered Roller Bearing (Part No.S-25590)
MOOG Driveline Products – Double Cardan CV H Yoke (Part No.647)
from
$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)
from
$121.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
National – Wheel Bearing and Seal Kit (Part No.SBK-1)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Spindle bearing and seal kit
- Includes all components required to complete the repair
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Oil Seal (Part No.S-722109)
from
$5.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.10 & Down (Part No.20047)
from
$339.99
Yukon replacement standard open carrier case for Dana 60, 4.10 & down Semi-Float & Full float, (incl ABS) 2-1/8″ tall.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Dana Spicer 60
- 4.10 and down ratio only
- Does not include spider gears
National – Multi Purpose Seal (Part No.450185)
from
$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Bearing Race Driver (Part No.56015)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88610 race
- All steel construction
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – 8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi (Part No.16148)
from
$275.99
8.75″ Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Chrysler 8.75″, 1955-1964 GM passenger car and AMC Model 20 Powr Lok positraction
USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)
from
$369.99
Product Features:
See More
- Fits Chrysler Dana Spicer 60 with 35 spline axles
- 4.56 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Popular 1977 Jeep Wagoneer Drivetrains Categories
1977 Jeep Wagoneer Drivetrains
You count on your 1977 Jeep Wagoneer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 308 Drivetrains ranging in price from $3.29 to $1,469.99, you’re sure to find everything you need for your 1977 Jeep Wagoneer.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 1977 Jeep Wagoneer Drivetrains start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,595 extensive product reviews on 1977 Jeep Wagoneer Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1977 Jeep Wagoneer below to get started!
Top-Rated Drivetrains Brands For Your 1977 Jeep Wagoneer
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Jeep Wagoneer running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1977 Jeep Wagoneer back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1977 Jeep Wagoneer, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1977 Jeep Wagoneer Drivetrains
What are the most purchased Drivetrains for the 1977 Jeep Wagoneer?
Out of 308 Drivetrains for the 1977 Jeep Wagoneer, the most popular in our inventory are:
What are the top-rated 1977 Jeep Wagoneer Drivetrains?
Top-rated Drivetrains for your 1977 Jeep Wagoneer based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
