1977 Ford LTD Camshafts
More 1977 Ford LTD Camshafts
Find your specific 1977 Ford LTD original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1977 Ford LTD Camshafts
Mr. Gasket – Cam Change Gaskets (Part No.4410)
from
$63.09
If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.
Product Features:
See More
Product Features:
- Contains all the gaskets needed to change out your camshaft
- Fuel Injector O-Ring Not Included
- Meets Performance Standards
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$321.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8 (Part No.7167)
from
$423.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford FE 390-428 V8 (Part No.7106)
from
$433.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford Cleveland 351C V8 (Part No.7168)
from
$419.99
Edelbrock part #7168 Performer RPM Camshaft is designed for small-block Ford 351C V-8 applications. This Edelbrock cam kit produced 465 HP & 445Ft-lbs. of torque when used with #7564 intake and #61629 cylinder heads on a 351C. engine. The camshaft works w
Product Features:
See More
Product Features:
- Cast Cam Type
- Hydraulic Lifter Type
- Exhaust 244 deg/Intake 234 deg Duration @ .050 Lift
- Exhaust 0.562in./Intake 0.562in. Valve Lift
- 112 deg Lobe Steps
Edelbrock – Performer-Plus camshaft for Ford 351M-400 V-8 (Part No.2172)
from
$345.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Sealed Power – Engine Camshaft Bearing Set (Part No.1443M)
from
$33.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1403M)
from
$39.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1450M)
from
$41.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1445M)
from
$46.99
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1439M)
from
$30.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1414M)
from
$52.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1204M)
from
$43.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Edelbrock – Rollin’ Thunder Camshaft for Ford 5.0L V8 (Part No.3722)
from
$508.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – Thumpr 227/241 Hydraulic Roller Cam for Ford 351C, 351M-400M (Part No.32-600-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)
from
$492.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam for Ford 351C, 351M-400M (Part No.32-601-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 351W V8 (Part No.2281)
from
$520.99
Product Features:
See More
- Roller Cam Type
- Roller Lifter Type
- Exhaust 238 deg/Intake 238 deg Duration @ .050 Lift
- Exhaust 0.364in./Intake 0.364in. Valve Lift
- 112 deg Lobe Steps
Dorman – Steel Cup Expansion Plug 1-45/64 In. SC, Height 0.270 (sold by each) (Part No.555-033)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 1-53/64 In., Height 0.380 (sold by each) (Part No.555-083)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-1/2 In., Height 0.280 (sold by each) (Part No.555-055)
from
$2.29
Our Engine Camshaft Plugs are available in multiple styles, including Cup Type, Pilot Seal, Reverse Taper, Concave, and Quick-Seal® Rubber. Our unique Seal Expansion Plug ensures a leak-proof fit.
Product Features:
See More
Product Features:
- Many sizes available
- Conveniently available in packs of different quantities
- Constructed from high quality steel, copper, brass, or rubber
- Dorman’s Engine Camshaft Plugs are constructed to strict engineering quality standards
Dorman – Steel Reverse Taper Cup Expansion Plug 3/8 In. SC, Height 0.310 In. (sold by each) (Part No.555-054)
from
$1.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270 (sold by each) (Part No.555-073)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1977 Ford LTD Camshafts Categories
1977 Ford LTD Camshafts
Maybe you’re in the middle of a full rebuild of that 1977 Ford LTD. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 14 different Camshafts in our inventory ranging from $2.29 to $522.99. That means you can find the exact parts or products you need to keep that 1977 Ford LTD running smoothly.
Camshafts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Ford LTD. Sealed Power, Dorman, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 1977 Ford LTD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Camshafts to keep your 1977 Ford LTD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 1977 Ford LTD Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Ford LTD demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your LTD the best it can be. Be sure to browse some of our top Camshafts brands and parts.
FAQs for 1977 Ford LTD Camshafts
What are the most purchased Camshafts for the 1977 Ford LTD?
Out of 14 Camshafts for the 1977 Ford LTD, the most popular in our inventory are:
from
$2.29
This product is not rated
Steel Cup Expansion Plug 2-1/2 In., Height 0.280 (sold by each)
Camshaft Plugs
