1977 Chevrolet Monte Carlo Differentials

Essential 1977 Chevrolet Monte Carlo Differentials

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.2" GM (Part No.32237)

Chrome Moly Cross Pin Shaft For Mini-Spool For 8.2" GM

from

$93.99
Chrome Moly cross pin shaft for Mini-Spool for 8.2″ GM HD.

Product Features:
  • Hardened cross pin shaft
  • Fits GM 8.2″
See More

Pro-King – Pinion Seal (Part No.740A070)

Pinion Seal

from

$2.39
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Standard Open Carrier Case, GM 8.5", 2.73 & Up (Part No.20083)

Standard Open Carrier Case, GM 8.5", 2.73 & Up

from

$239.99
8.5″ GM standard Open case, 2.73 & up, 28 or 30 spline.

Product Features:
  • Standard open carrier case
  • Fits GM 8.5″ with 28 or 30 spline axles
  • 2.73 and up ratio only
  • Does not include spider gears
See More

Pro-King – Differential Cross Shaft (Part No.742G673)

Differential Cross Shaft

from

$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-142)

Rear Axle Shaft, Left or Right

from

$281.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

from

$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

Product Features:
  • Pinion gear thrust washer for GM 8.5″ and 8.6″
  • Fits standard open differentials only
  • 0.795″ I.D.
See More

Yukon Gear – Mini Spool For GM 12 Bolt Car & Truck With 30 Spline Axles (Part No.32227)

Mini Spool For GM 12 Bolt Car & Truck With 30 Spline Axles

from

$194.99
Mini Spool for GM 12P and 12T with 30 spline axles. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 12 bolt passenger car and truck
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.A-6)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89249)

Tapered Roller Bearing

from

$13.49
Product Features:
  • Brand may vary by location
See More

Spectre – Differential Cover (Part No.60879)

Differential Cover

from

$189.99
Spectre’s Polished Aluminum Differential Covers feature a finned design and 10 bolt assembly for optimum fit and function. Includes 10 SAE standard bolts for installation. You’ll need to supply your own bolts if your vehicle uses metric bolts. Manufactured using high quality materials this product was designed to perform as well as they look.

Product Features:
  • Polished aluminum
  • 10 bolt cover with finned design
  • Gasket included
  • 10 gold Iridite 3/8 inch -18 x 3/4 inch differential cover bolts included
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Differential Carrier Shim Kit

from

$8.49
High-quality Differential Carrier Shim Kit

Product Features:
  • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)

18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$483.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 18 piece kit
  • Steel clutches
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Yukon Gear – Bearing Install Kit For GM 8.5" Differential (Part No.11067)

Bearing Install Kit For GM 8.5" Differential

from

$221.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 8.5″ rear
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
See More

Mr. Gasket – Differential Gasket (Part No.84)

Differential Gasket

from

$21.79
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1965-1970 Buick, Olds, Pontiac, 10 bolt 8.20 inch ring gear.

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

Clutch Guide For GM 7.5" & 7.6" Dura Grip

from

$10.99
Product Features:
  • Clutch guide
  • Fits GM 7.5″ and 7.625″ Dura Grip
See More

USA Standard Gear – Master Overhaul Kit for the GM 8.5 Differential with HD Posi or Locker (Part No.37057)

Master Overhaul Kit for the GM 8.5 Differential with HD Posi or Locker

from

$208.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits GM 8.5″ rear with aftermarket positraction
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck (Part No.33380)

Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck

from

$7.99
Standard Open side gear thrust washer for 12P and 12T GM.

Product Features:
  • Side gear thust washer for GM 12 bolt passenger car and truck
  • Fits standard open differentials only
See More

Pro-King – Differential Crush Sleeve (Part No.742G034)

Differential Crush Sleeve

from

$2.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

1977 Chevrolet Monte Carlo Differentials

Maybe you’re in the middle of a full rebuild of that 1977 Chevrolet Monte Carlo. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 170 different Differentials in our inventory ranging from $1.99 to $1,153.99. That means you can find the exact parts or products you need to keep that 1977 Chevrolet Monte Carlo running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Chevrolet Monte Carlo. Valvoline, Felpro, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1977 Chevrolet Monte Carlo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,566 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 4.2 stars and Differential Shaft Lock Bolt with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1977 Chevrolet Monte Carlo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1977 Chevrolet Monte Carlo Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Chevrolet Monte Carlo demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Monte Carlo the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1977 Chevrolet Monte Carlo Differentials

What are the most purchased Differentials for the 1977 Chevrolet Monte Carlo?

Out of 170 Differentials for the 1977 Chevrolet Monte Carlo, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Housing Cover Gaskets
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Bearings
from $16.99
(25)
Bearings
Differential Bearings

What are the top-rated 1977 Chevrolet Monte Carlo Differentials?

Top-rated Differentials for your 1977 Chevrolet Monte Carlo based on customer reviews/ratings are:
Differential Ring And Pinion
from $342.99
(23)
Differential Ring And Pinion
“So far so good.”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Bearings
from $15.99
(9)
Bearings
“as advertised”