1977 Chevrolet K5 Blazer Air Intakes

Essential 1977 Chevrolet K5 Blazer Air Intakes

Felpro – AIR CLEANER MOUNTING GASKET (Part No.60357)

AIR CLEANER MOUNTING GASKET

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest – Needle and Seat (Part No.93-554R)

Needle and Seat

from

$9.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

Felpro – Carburetor Choke Tube Gasket (Part No.72591)

Carburetor Choke Tube Gasket

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Holley – Carburetor – 770 CFM Alum Street Avenger E/C (Part No.0-83770)

Carburetor - 770 CFM Alum Street Avenger E/C

from

$626.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Features A Tumble Polished Finish Can Also Be Hand Polished
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Glass Fuel Level Sight Windows For Easy Safe Float Adjustments
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
See More

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1098)

Carburetor Choke Thermostat

from

$48.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Carquest – Carburetor Choke Thermostat (Part No.779-1485)

Carburetor Choke Thermostat

from

$69.05
Carquest distributes a full line of engine management products, providing the aftermarket with premium quality and comprehensive coverage.
See More

Edelbrock – Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange) (Part No.1223)

Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange)

from

$47.99
Product Features:
  • Edelbrock triple chrome-plated round air cleaner #1223 work with all popular 5-1/8″ diameter Carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB).
  • The 10″ and 14″ models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter #1205 (sold separately).
  • #1208, #1209 and #1221 fit all Edelbrock Carburetors.
  • Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut.
  • Dimensions are accurate within 1/8″.
See More

Edelbrock – Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn (Part No.1002)

Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn

from

$31.99


Product Features:
  • Super Flow; Good Filtration
  • Urethane Foam Element
  • Strong Metal Inner Frame
  • Performance Benefits
  • Cleans With Soap and Water
  • Low Maintenance Cost
  • Simple To Install
  • Nicely Finished; Low Profile
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers (Part No.435-2101)

For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers

from

$59.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Wont Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)

Performer Carburetor Calibration Kit #1487 for #1406 Carburetors

from

$62.99
Product Features:
  • Customize Carburetor Calibration and Performance
  • Owners Manual has Assembly Help
  • Includes Metering Rod Retaining Spring
  • Includes Metering Rods
  • Includes Metering Jets
  • Includes Step-Up Springs
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1741)

Carburetor Tune-Up Kit

from

$22.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1740)

Carburetor Tune-Up Kit

from

$29.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1141)

Carburetor Choke Pull-Off

from

$66.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Carquest – Carburetor Choke Pull-Off (Part No.779-6146)

Carburetor Choke Pull-Off

from

$80.05
Carquest distributes a full line of engine management products, providing the aftermarket with premium quality and comprehensive coverage.
See More

Felpro – Carburetor Mounting Gasket (Part No.60369)

Carburetor Mounting Gasket

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.60482)

Carburetor Mounting Gasket

from

$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Edelbrock – Carburetor Progressive Throttle Linkage Kit for Triple Carb Set-up (Part No.1033)

Carburetor Progressive Throttle Linkage Kit for Triple Carb Set-up

from

$186.99
The Edelbrock part #1033 Progressive Linkage Kit is designed to smooth throttle response, eliminate flat spots and improve fuel economy. It achieves this by only opening the center carburetor at less than 50% (or 33%) pedal travel thus sharpening the vent

Product Features:
  • Steel Material
  • Zinc Plated
  • Adjustable
  • 3-Barrel Configuration
  • Made In The USA
See More

Dorman – Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9 (Part No.41251)

Breather Element Clips - GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

from

$1.99
Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

Dorman – Help – Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9 (Part No.41113)

Breather Element Clips - GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

from

$1.49
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Mr. Gasket – Intake Gasket (Part No.121)

Intake Gasket

from

$27.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Made From Cellulose/nitrile Composition Material
  • Provides Excellent Sealing And Durability
  • Can Be Trimmed If Necessary For Modified Port App
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5820)

Ultra Seal: Intake Gasket

from

$34.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
See More

Weiand – Stealth; Intake Manifold (Part No.8019)

Stealth; Intake Manifold

from

$398.99


Product Features:
  • High Rise/Dual Plane Design For Maximum Torque
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking
  • More Consistent Castings
See More

Edelbrock – Performer RPM Small Block Chevy Intake Manifold (Part No.7101)

Performer RPM Small Block Chevy Intake Manifold

from

$281.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6550 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
  • Also in Polished/PermaStar/EnduraShine Finish
See More

Edelbrock – RPM Air-Gap Big Block Chevy 2-O Polished Intake Manifold (Part No.75611)

RPM Air-Gap Big Block Chevy 2-O Polished Intake Manifold

from

$772.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retains good throttle response and acceleration. Larger plenum and runners maximize other upgrades. Edelbrock total power package maximizes gains. Available in cast, polished or endurashine finish.

Product Features:
  • Polished Version of Edelbrock PN[7561]
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing (Part No.1288)

Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing

from

$99.99
This Edelbrock Fuel Log kit #1284 is an exact replica of the original design used by Vic Sr. in the 1950’s. They are made from extruded aluminum tube with a 3/8″ threaded outlet at each end and a polished finish. Kit includes, black neoprene hose, Corbin

Product Features:
  • Polished Log
  • Brass Fittings
  • Black Neoprene Hose
  • 5-1/2 in. Outlet Spacing
  • Includes Hose Clamps
See More

1977 Chevrolet K5 Blazer Air Intakes

You count on your 1977 Chevrolet K5 Blazer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 94 Air Intakes ranging in price from $1.49 to $1,776.99, you’re sure to find everything you need for your 1977 Chevrolet K5 Blazer.

Brands matter. If you want to shop a specific Air Intakes brand, we stock 11 different brands like Felpro, Edelbrock, and Mr. Gasket. 1977 Chevrolet K5 Blazer Air Intakes start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 414 extensive product reviews on 1977 Chevrolet K5 Blazer Air Intakes. Some of the top-rated Air Intakes products we carry are Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn with 3.7 stars and Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet with 4.4 stars.

Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1977 Chevrolet K5 Blazer below to get started!

Top-Rated Air Intakes Brands For Your 1977 Chevrolet K5 Blazer

Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Chevrolet K5 Blazer running right for years to come. In our inventory you’ll find brands like Felpro, Edelbrock, Mr. Gasket, and even more.

Popular Holley Air Intakes

You’ll find popular Holley brand products across Intake Manifold Parts and Carburetor Parts. All are waiting to get your 1977 Chevrolet K5 Blazer back on the road. Some of the top-rated Holley products in these categories are:
Keith Dorton Series; Intake Manifold
from $491.99
(1)
Keith Dorton Series; Intake Manifold
Intake Manifolds
Prem Street Carbs (Avengers)
from $626.99
(2)
Prem Street Carbs (Avengers)
Carburetors

Top-Rated Felpro Air Intakes


If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Air Intakes for your 1977 Chevrolet K5 Blazer, and some of our most reviewed Felpro parts include:
INTAKE MANIFOLD GASKET SET
from $22.49
(46)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets
Engine Intake Manifold Gasket Set
from $29.99
(46)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
Air Cleaner Mounting Gasket
from $3.29
(39)
Air Cleaner Mounting Gasket
Air Cleaner Mount Gaskets

FAQs for 1977 Chevrolet K5 Blazer Air Intakes

What are the most purchased Air Intakes for the 1977 Chevrolet K5 Blazer?

Out of 94 Air Intakes for the 1977 Chevrolet K5 Blazer, the most popular in our inventory are:
Intake Manifold Bolts
from $15.49
(12)
Intake Manifold Bolts
Intake Manifold Bolt Sets

What are the top-rated 1977 Chevrolet K5 Blazer Air Intakes?

Top-rated Air Intakes for your 1977 Chevrolet K5 Blazer based on customer reviews/ratings are:
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
from $451.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”
Ultra Seal: Intake Gasket
from $49.49
(5)
Ultra Seal: Intake Gasket
“I bought this to replace the CV Axle because the inner boot on my old axle was flinging grease. This part was a perfect replacement for my 2008 Honda ”