1977 Chevrolet Corvette Fuel and Emissions Systems

Essential 1977 Chevrolet Corvette Fuel and Emissions Systems

KAI – Fuel Tank (Part No.FTK010118)

Fuel Tank

from

$234.99
New Platinum Pro Fuel Tank 20 Gallon

Product Features:
  • 20 Gallon, With EEC, Excludes 430HP
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Ported Vacuum Switch (Part No.ECA1195)

Ported Vacuum Switch

from

$48.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

GM Genuine Parts – Multi-Port Fuel Injector Rail (Part No.217-1619)

Multi-Port Fuel Injector Rail

from

$249.99
GM Genuine Parts Fuel Injector Rails are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1004)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$7.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Delphi – Electric Fuel Pump: With Hose Clips, Hose Piece, Insulating Sleeve, Isolator, Seals (Part No.FE0114)

Electric Fuel Pump: With Hose Clips, Hose Piece, Insulating Sleeve, Isolator, Seals

from

$107.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Evaporative Emissions Charcoal Canister (Part No.911-264)

Evaporative Emissions Charcoal Canister

from

$168.99
This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:
  • Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
  • Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

GM Genuine Parts – Vapor Canister (Part No.215-181)

Vapor Canister

from

$275.99
GM Genuine Parts Vapor Canisters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These canisters capture and store evaporating fuel vapors from the fuel tank to be drawn into the intake manifold during engine operation. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps reduce harmful pollutants from entering the atmosphere
  • Captures fuel vapors to be re-burned in the engine
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Secondary Air Injection Pump Check Valve

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Air Check Valve (Part No.55050)

Air Check Valve

from

$8.49
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.

Product Features:
  • Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
  • Air Check Valve
  • The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
  • Include gaskets and mounting hardware for a complete repair
  • Direct replacement for a proper fit every time
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)

Fuel Pump Block-Off Plate

from

$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
  • Easy Installation
See More

Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)

Sbc Blk Off Plate W/Bolts

from

$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

Product Features:
  • Necessary if switching to electric fuel pump
  • Includes block off plate gasket
  • Includes chrome mounting bolts with washers
  • Triple chrome plated
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

Fuel Pump Mounting Plate

from

$16.99
Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

GM Genuine Parts – Exhaust Gas Recirculation (EGR) Valve Kit with Gasket (Part No.214-5084)

Exhaust Gas Recirculation (EGR) Valve Kit with Gasket

from

$108.99
GM Genuine Parts Equipment Exhaust Gas Recirculation (EGR) Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves are an emission control device. EGR valves modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1503)

Exhaust Gas Recirculation (EGR) Valve

from

$47.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
  • Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
See More

Dorman – Fuel Pump Lock Ring (Part No.579-002)

Fuel Pump Lock Ring

from

$9.99
Recommended for replacement whenever the sending unit is serviced, our Fuel Tank Sending Unit Lock Ring secures and retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.

Product Features:
  • Direct replacement for a proper fit every time
  • Corrosion-resistant
  • Replacing the lock ring ensures the fuel pump is positioned properly in the fuel tank
  • Quality-tested for trouble-free performance
See More

Spectra Premium – Fuel Tank Lock Ring (Part No.TR7)

Fuel Tank Lock Ring

from

$17.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium lock rings meet or exceed the performance of the original equipment they replace.

Product Features:
  • Lock ring should be replaced when changing the fuel tank or fuel module
  • Application specific design ensure a perfect fit guarantee
  • OEM fit, form and function
  • OEM design ensures corrosion resistance and prevents leakage from the fuel tank
  • Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
See More

Bosch – Oxygen Sensor: 4 Wire, 12.6" Long, Heated, Exact Fit (Part No.15000)

Oxygen Sensor: 4 Wire, 12.6" Long, Heated, Exact Fit

from

$112.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.  Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product. 

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

NTK – NTK Oxygen Sensor (Part No.C501066592NTK)

NTK Oxygen Sensor

from

$70.51
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
See More

Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit

from

$31.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.  Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product. 

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

1977 Chevrolet Corvette Fuel and Emissions Systems

You count on your 1977 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 43 Fuel and Emissions Systems ranging in price from $1.29 to $339.99, you’re sure to find everything you need for your 1977 Chevrolet Corvette.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 14 different brands like Carquest Premium, Motorad, and Felpro. 1977 Chevrolet Corvette Fuel and Emissions Systems start as low as $1.29!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 964 extensive product reviews on 1977 Chevrolet Corvette Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Electric Fuel Pump with 2.5 stars and Locking Fuel Cap with 4.3 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1977 Chevrolet Corvette below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1977 Chevrolet Corvette

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Felpro, and even more.

Popular Felpro Fuel and Emissions Systems

You’ll find popular Felpro brand products across Fuel Pumps. All are waiting to get your 1977 Chevrolet Corvette back on the road. Some of the top-rated Felpro products in these categories are:
Fuel Pump Mounting Gasket
from $2.99
(26)
Fuel Pump Mounting Gasket
Fuel Pump Block-Off Plate Gaskets

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1977 Chevrolet Corvette, and some of our most reviewed Carquest Premium parts include:

FAQs for 1977 Chevrolet Corvette Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1977 Chevrolet Corvette?

Out of 43 Fuel and Emissions Systems for the 1977 Chevrolet Corvette, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits

What are the top-rated 1977 Chevrolet Corvette Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1977 Chevrolet Corvette based on customer reviews/ratings are:
Electric Fuel Pump
from $64.99
(37)
Electric Fuel Pump
“It works as advertised.”
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”